If you want to add a DTS Global Server to your system, choose option 4 (Add DTS Global Server) from the Modify Configuration Menu.
The configuration prompts you with the following messages:
At each prompt, enter <RETURN> to take the default displayed in [braces] or enter '?' for help.After you enter your DCE hostname, the procedure displays an alphabetical list of cells it has found within broadcast range of your system. In many environments, the list consists of only one name. Choose the name of the DCE cell that you want to join. If you do not know the name of the cell, consult your network administrator. Do not add the /.../ prefix to the cell name; the procedure automatically adds it.Press <RETURN> to continue:
Shutting down DCE services
DCE services stopped
Removing temporary local DCE databases and configuration files
Removing permanent local DCE databases and configuration files
Starting client configuration
Initializing dced (dced)...
Starting dced (dced)...
Gathering list of currently accessible cells
Please enter your DCE hostname [dcehost]:
Please enter the name of your DCE cell (or '?' for help) []:
If you enter a cell name that is not on the list of cell names, the procedure assumes you are performing a WAN configuration, and asks you to enter the hostname of the master CDS server for your cell.
After you enter your cell name, the procedure continues, displaying information similar to the following, but dependent upon your configuration:
Starting CDS advertiser daemon (cdsadv)...Make sure you check that the correct time is displayed before you continue with the configuration. If the time is incorrect, specify n, and the procedure exits to the operating system to allow you to reset the system time. After you correct or verify the time, specify y, and the procedure continues with the following message (if you have DECnet/OSI installed and configured):Testing access to CDS server (please wait)....
Attempting to locate security server
Found security server
Creating /opt/dcelocal/etc/security/pe_site file
Checking local system time
Looking for DTS servers in this LAN
Found DTS server
Found DTS server
Looking for DTS servers in this cell
No DTS servers found in cell
The local system time is: Thu Jul 13 10:36:36 1998
Is this time correct? (y/n):
You seem to have DECnet/OSI installed on this system. DECnet/OSI includes a distributed time synchronization service (DECdts), which does not currently support the DCE Distributed Time Service (DCE DTS) functionality. The DCE DTS in this release provides full DECdts functionality. This installation will stop DECdts and use DCE DTS instead. For further clarification, please consult the DCE for Compaq Tru64 UNIX Product Guide.Specify y to accept time from any DECnet/OSI DECdts server; however, time from this source is unauthenticated. If you specify n, this system accepts time only from DCE time servers.Even though DCE DTS will be used, it is possible to accept time from DECdts servers.
Should this node accept time from DECdts servers? (y/n) [n]:
Do you want to enable DCE SIA? (y/n) [n] :
After you respond to the prompt, the procedure stops the CDS advertiser and asks you to perform a dce_login operation, as follows:
This operation requires that you be authenticated as a memberObtain the password from your cell administrator.of the sec-admin group. Please login.
Enter Principal Name: cell_admin
Password:
After you perform the dce_login operation, the procedure continues with the following messages:
Configuring security clientThe DCE Configuration Verification Program (CVP) exercises the components of DCE that are running in this cell. It requires approximately 1 to 2 minutes to run.Creating /krb5/krb.conf file
Adding kerberos5 entry to /etc/services
Creating ktab entry for client
Starting sec_client service (please wait).
This machine is now a security client.
Configuring CDS client
Creating the cds.conf file
Starting CDS advertiser daemon (cdsadv)...
Testing access to CDS server (please wait).
Deleting known hosts/dcehost objects from name space
Creating hosts/dcehost objects in name space
This machine is now a CDS client.
Do you want to enable DCE SIA? (y/n/?) [n]: y
Enabling DCE SIA
Configuring DTS daemon as server (dtsd)
Stopping sec_client service...
Starting sec_client service (please wait).
Starting DTS daemon (dtsd)...
Waiting for DTS daemon to synchronize (please wait)..........
Do you want to run the DCE Configuration Verification Program? (y/n/?) [y]:
If you type y to run the CVP at this time, you see the following display:
Executing DIGITAL DCE V3.1 (Rev. 635) for Compaq Tru64 UNIX CVP (please wait)The DCE components that you have configured are added to your system startup procedure so the daemons restart automatically whenever the system is rebooted. When the procedure is completed, the DCE Setup Main Menu is redisplayed.Copyright (c) Digital Equipment Corporation. 1998. All Rights Reserved.
Verifying...........
DIGITAL DCE V3.1 (Rev. 635) for Compaq Tru64 UNIX CVP completed successfully
Modifying system startup procedure...
If your system is configured as a DTS Global Server, option 4 shows "Change from DTS Global Server to DTS clerk".
*** Modify Configuration Menu ***Choose this option if you wish to modify your configuration from a DTS Global Server to a DTS Clerk.1) Add Replica CDS Server
2) Add Replica Security Server
3) Add DTS Local Server
4) Change from DTS Global Server to DTS clerk
5) Add Null Time Provider
6) Add NTP Time Provider
7) Enable Auditing
8) Enable DCE SIA
9) Enable Kerberos 5
10) Configure LDAP Name Service
11) Add LDAP Client Service
12) Enable LDAP GDA
13) Add PKSS Server
14) Register in X.500
R) Return to previous menu
Please enter your selection (or '?' for help):
When the procedure is completed, the Modify Configuration Menu redisplays.