SOFTPAQ NUMBER: SP8437 PART NUMBER: 270894-006 FILE NAME: N/A TITLE: ROMPaq for Deskpro 2000 (686M ROM) VERSION: 686M_121098 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Desktops PRODUCTS AFFECTED: Deskpro 2000 models 6233MMX, 6266MMX, and 6300MMX with a 686M Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 8, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP7896 DESCRIPTION: This creates a ROMPaq firmware upgrade diskette to upgrade the System ROM to the 12/10/98 version in Deskpro 2000 models with a 686M Family ROM. The ROM Family and ROM date can be determined by running F10 Setup. Enhancements/Fixes in this version: - Fixes an issue where the CD-ROM drive would not boot a bootable CD. - Fixes an issue during NT installation that caused a lockup when an Ultra-Wide SCSI driver was specified in the diskette drive. - Adds support for improved VGA performance by caching the option ROM. - Now supports a warm boot with client32 for DOS. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette in a drive to create the diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 12/10/98 Compaq System ROM and upgrade the firmware. Copyright 1998,1999 Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.