SOFTPAQ NUMBER: SP3839 PART NUMBER: N/A FILE NAME: N/A TITLE: Deskpro 2000 S3 Display Support for OS/2 VERSION: 3.03 LANGUAGE: English CATEGORY: Desktops/Driver PRODUCTS AFFECTED: Deskpro 2000 Series with the S3 V2/GX graphics controller, including models announced July 1997 NOTE: To determine whether your unit has the video controller supported by this driver, refer to step 4 in the HOW TO USE section below. OPERATING SYSTEM: IBM OS/2 SYSTEM CONFIGURATION: Compaq S3 V2/GX video graphics controller EFFECTIVE DATE: 10 July 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: N/A DESCRIPTION: This SoftPaq unpacks the files required to install the video driver for IBM OS/2 for the S3 V2/GX controller used in certain Deskpro 2000 models, including those announced in July 1997. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into the download directory or the directory specified. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. To install the driver, open an OS/2 full-screen or OS/2 window session. At the OS/2 command prompt, type in the path to SETUP.EXE in the download directory and press ENTER: c:\\setup Follow on-screen instructions and select VGA mode. 5. When the installation is complete, shut down and restart the computer for the changes to take effect. 6. After the driver has been installed, you may delete the files from the download directory if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies