SOFTPAQ NUMBER:  SP3664
PART NUMBER:  242543-005, 242544-005
FILE NAME:  N/A
TITLE:  Netelligent 10 T/2 PCI UTP/Coax Controller Drivers
VERSION:  1.30 Rev A
LANGUAGE:  English

CATEGORY:  Drivers/Misc

PRODUCTS AFFECTED:  Compaq servers and workstations

OPERATING SYSTEM:  MS-DOS/Windows 3.1/Windows for Workgroups;
Microsoft Windows 95; Microsoft Windows NT; IBM OS/2;
Novell NetWare 3.12 and 4.x Server, NetWare Client 32.

SYSTEM CONFIGURATION:  Optional Netelligent 10 T/2 PCI UTP/Coax
Interface Controller installed

EFFECTIVE DATE:  23 Jun 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP3206

DESCRIPTION:  Creates the two Compaq Network Interface Controller
Drivers diskettes containing drivers and diagnostics for Compaq
10 T/2 PCI UTP/Coax network controllers.  Fixes an Autodetect problem
under Netware which was seen with the original shipping diskettes.

Diskette 1 - Drivers for IBM and Microsoft
Diskette 2 - Drivers for Novell and diagnostics

HOW TO USE:

1. Obtain two (2) formatted 1.44 MB diskette(s).

2. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file that is downloaded is SP3664.EXE.

3. From that drive and directory, execute the SoftPaq file:
    SP3664.EXE [ENTER]
You will be prompted to place the formatted 1.44 MB diskettes into a
diskette drive to create the diskettes.

4. After the diskettes are created, you may delete the downloaded file
SP3664.EXE if you wish.

5. Refer to README.TXT on each diskette for instructions on installing
and using the software.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.