TITLE: Intel Application Accelerator (IAA) SATA RAID Driver/Application

VERSION: 4.0.0.6211 Rev. A
DESCRIPTION:
This SoftPaq contains the Intel Application Accelerator (IAA) SATA RAID driver 
and application for the workstation models and operating systems listed.

PURPOSE: Critical
SOFTPAQ NUMBER: SP28129
SUPERSEDES: None
EFFECTIVE DATE: June 28, 2004
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw4200: All Models
HP Workstation xw6200: All Models
HP Workstation xw8200: All Models

OPERATING SYSTEM(S): 
Windows 2000
Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
N/A

HOW TO USE: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions. The 
self-extracting file will store the drivers in the C:\SWSETUP\IAA_4.0.0.6211 
directory.


FOR OPERATING SYSTEM SATA RAID ARRAY IMAGE:

Install the driver using the F6 install function when installing Microsoft 
Windows or build a pre-installation image with the driver.

The drivers can be extracted from the iata_enu.exe file. To extract the drivers 
for use with the F6 install function or to build into a pre-installation image, 
execute the following command in a DOS shell:

c:\iata_enu.exe -a -a -p c:\

The command will extract the following files to the path location specified in 
the command:
1) iaAHCI.cat 8KB
2) iaAHCI.inf 3KB
3) iaStor.cat 8KB
4) iaStor.inf 3KB
5) iaStor.sys 457KB
6) TXTSETUP.OEM 2KB


FOR A DATA SATA RAID ARRAY IMAGE:

1. Install the driver and application after you have the operating system on a 
different hard drive.

2. Then install two SATA hard drives to the onboard SATA ports and enable the 
SATA RAID option ROM in the systems BIOS setup prior to booting to Windows.

3. Execute the following command from C:\SWSETUP\IAA_4.0.0.6211:

iata_enu.exe

This command installs the IAA 4.0.0.6211 driver and the IAA application that 
configures and controls the SATA RAID arrays.

NOTE: If the option ROM is not enabled, the following error message is 
returned:

"This hardware is incompatible"



Copyright (c) 2004 Hewlett-Packard Development Company, L.P.