TITLE: ROM Image for HP Notebook System BIOS (68P4F ROM) Remote ROM Flash - SSM compliant

VERSION: F.1A 
DESCRIPTION:
This SoftPaq contains a binary image for the System BIOS (ROM) for the notebook 
models listed below with a 68P4F Family ROM. This SoftPaq is used to
flash the System ROM on target PCs on a network, and it requires System
Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date
can be determined by running the Setup Utility by pressing F10 on the target
computer during system power on of the computer, and viewing File/System
Information.

PURPOSE: Recommended
SOFTPAQ NUMBER: SP27736
SUPERSEDES: SP27028
EFFECTIVE DATE: April 1, 2004
CATEGORY: BIOS
SSM SUPPORTED: Yes

PRODUCT TYPE(S)
Notebooks
 
PRODUCT MODEL(S): 
Evo N610c
Evo N610v

OPERATING SYSTEM(S): 
Microsoft Windows 2000
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows XP 32-bit Home
Microsoft Windows XP 32-bit Professional
 
LANGUAGE(S): 
US English
 
FIXES: 
 - Fixes a problem that could occur in a notebook running on AC power only with no 
   battery power available. If it entered Standby mode and then lost AC power, it 
   would not come back up normally when power was restored. 
 
PREREQUISITES: 
Compaq System Software Manager
 
HOW TO USE:
 
1. Download the SoftPaq to a temporary, empty directory on your hard drive. The
file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected Evo
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!


Copyright (c) 2004 Hewlett-Packard Development Company, L.P.