SOFTPAQ NUMBER: SP2912 PART NUMBER: 183589-299, 183597-299 FILE NAME: N/A TITLE: Japanese Server Diagnostics VERSION: 10.11J Rev A LANGUAGE: Japanese CATEGORY: Diagnostics/Setup PRODUCTS AFFECTED: Compaq Servers, including: ProSignia, ProSignia VS, ProSignia 200, ProSignia 300, ProSignia 500; ProLiant 800, ProLiant 1000, ProLiant 1500/1500R, ProLiant 2000, ProLiant 2500/2500R, ProLiant 4000, ProLiant 4500/4500R, ProLiant 5000/5000R; Systempro, Systempro/e, Systempro/LT, Systempro/XL OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 28 March 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2696 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. This Japanese version of Server Diagnostics differs from the U.S. version as follows: - Two separate diskettes for TEST utility and INSPECT utility - Disabled Keyboard typematic testing Server Diagnostics support currently shipping Systems Division server products. It is installed on the Diagnostics Partition for those systems which support it and have hard drives. It is shipped as a diskette on all other products. This release adds: - Support for ProLiant Storage System /F - Support for the Compaq Wide-Ultra SCSI drives HOW TO USE 1. Obtain two (2) formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2912.EXE. 3. From that drive and directory, execute the SoftPaq file: SP2912 [ENTER] You will be prompted to place the formatted 1.44-MB diskettes into a diskette drive to create the diskettes. 4. After the diskettes are created, you may delete the downloaded file SP2912.EXE if you wish. 5. Power down the system. 6. Place the newly created Server Diagnostics diskette in Drive A:, and power up the system. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies