SOFTPAQ NUMBER: SP2721 PART NUMBER: 276018-001 FILE NAME: N/A TITLE: Compaq Array Driver Update for OS/2 VERSION: 3.15 Rev A LANGUAGE: English CATEGORY: Drivers/Servers PRODUCTS AFFECTED: All Compaq Servers OPERATING SYSTEM: IBM OS/2 v2.x IBM OS/2 Warp v3.0 IBM OS/2 Warp Connect 3.0 IBM OS/2 for SMP v2.11 IBM OS/2 Warp Server 4.0 IBM OS/2 Warp Server Advanced 4.0 IBM OS/2 Warp Server Advanced with SMP 4.0 SYSTEM CONFIGURATION: One of the above operating systems EFFECTIVE DATE: 16 Apr 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: N/A DESCRIPTION: Creates the Compaq Array Driver Update for OS/2 diskette, which contains an update to Version 3.15 from the Version 3.14 Compaq Array Driver, CPQARRAY.ADD, found in the OS/2 2.x Support Software, Version 2.11 (SoftPaq SP2707). For details on enhancements to the driver and installation, refer to the README.1ST file on the generated diskette. - Fixes a 'Trap D' problem which would occur during system boot when using a Compaq SMART Array controller. This problem did not affect Compaq SMART-2 controllers. - Fixes a potential system trap which could occur under high system stress. HOW TO USE: 1. Download the SoftPaq to an empty directory on your hard drive and change to that directory. The file that is downloaded is SP2721.EXE. 2. From that drive and directory, execute the SoftPaq file: SP2721 [ENTER] The following files should be created: QRST5.EXE 276018US._01 SP2721.DOC 3. Obtain a formatted 1.44 MB diskette. 4. To create the diskette, run QRST5 and follow the on-screen instructions. 5. After the diskette is created, you may delete the downloaded file SP2721.EXE and the other files created on your hard drive if you wish. 6. Refer to the README.1ST file on the diskette for installation instructions and additional information. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies