SOFTPAQ NUMBER: SP2682 PART NUMBER: N/A FILE NAME: EFS212 TITLE: Compaq EFS 2.12 for SCO UnixWare 2.1 VERSION: 2.12 LANGUAGE: English CATEGORY: Drivers/Servers PRODUCTS AFFECTED: Any Compaq Server Product OPERATING SYSTEM: SCO UnixWare, Version 2.10 SCO UnixWare, Version 2.11 SYSTEM CONFIGURATION: Any Compaq system running one of the above operating systems. EFFECTIVE DATE: 20 January 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2362 DESCRIPTION: Creates the three (3) diskettes of the Compaq Extended Feature Supplement (EFS) 2.12 for SCO UnixWare 2.11, a collection of device drivers to provide maximum performance with Compaq hardware. EFS 2.12 also includes several utilities to monitor and increase the performance of your Compaq server. DEVICE DRIVERS IN EFS 2.12 EFS 2.12 provides support for the following Compaq-specific hardware not supported in the base operating system: o Compaq Network Controller Support. The Compaq NetFlex Controller (cet) driver supports the family of Compaq NetFlex controllers under SCO UnixWare 2.10 and SCO UnixWare 2.11 operating systems. o Compaq Netelligent Controller Support. The Compaq Netelligent Controller (cet) driver supports the family of Compaq Netelligent controllers under SCO UnixWare 2.10 and SCO UnixWare 2.11 operating systems. o Compaq SCSI-2 Support. Compaq SCSI-2 support includes drivers for the Integrated 32-Bit Fast-SCSI-2 Controllers in the Compaq ProSignia and Compaq ProLiant Family of Servers. Support is also provided for the following options cards: Compaq 32-Bit Fast-SCSI-2 Controller card Compaq 32-Bit Fast-Wide SCSI-2/E Controller card Compaq 32-Bit Fast-Wide SCSI-2/P Controller card o Compaq Smart-2 /E Drive Array Controller. o Compaq Smart-2 /P Drive Array Controller. o ProLiant Storage System Support. The Compaq EFS 2.00b includes a driver to support the features of the ProLiant Storage System when connected to the Compaq 32-Bit Fast-SCSI-2 Controller or the Compaq 32-Bit Fast-Wide SCSI-2 Controller. o Compaq System Wellness Driver. System Wellness features include hardware components that monitor system activity, temperature conditions, fan operation, EISA bus utilization, and operation system up time. It also provides Automatic Server Recovery and Health Log Support for the Compaq SystemPro/XL, Compaq ProLiant, and Compaq ProSignia Servers. o Compaq Intelligent Drive Array support. Support is included for the Compaq Intelligent Drive Array, Compaq IDA-Expansion, Compaq IDA-2, Compaq SMART, Compaq SMART-2/E and Compaq SMART-2/P controllers. UTILITIES INCLUDED IN EFS 2.12 o SCSI-2 Management Utility. The SCSI-2 Management Utility provides support for the Compaq 32-Bit Fast-SCSI-2 Controller, the Compaq Integrated SCSI-2 Options Port, and the Compaq 6260 SCSI-2 Controller, and the Compaq TurboDAT Autoloader. o Intelligent Drive Array (IDA) Diagnostic Utility. The Intelligent Drive Array (IDA) Diagnostic Utility allows the administrator to view Compaq Drive Array controller status. o Compaq System Monitor Utility. The System Monitor utility (cpqmon) displays system activity and performance information. o Compaq UPS Support. The Uninterruptible Power Supply Utility (UPS) will gracefully shutdown a server if the AC power fails. o Disaster Recovery Utility. The Disaster Recovery Utility creates a bootable Disaster Recovery diskette and a Disaster Recovery tape. The diskette and tape are used to restore the primary hard disk in the event of a failure. o Compaq PageMarq Support. The PageMarq support includes the lp model CPQPagemarq printer interface script which provides support for the Compaq PageMarq printer. The cpqfax program provides support for sending faxes through the Compaq PageMarq printer. o Compaq Single Launch Point Utility. The Single Launch Point Utility allows execution of EFS 2.12 utilities by selecting them from a menu. HOW TO USE: IMPORTANT! DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE! Follow these steps to create the three (3) EFS 2.12 diskettes: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2682.EXE. 2. From that drive and directory, execute the SoftPaq file: SP2682 [ENTER] The following files will be created QRST.EXE EFS212._01 EFS212._02 EFS212._03 README.TXT 3. After the files are created, you may delete the downloaded file SP2682.EXE if you wish. 4. Follow the further instructions in README.TXT to create the diskettes by executing the QRST.EXE program and then read all information in the README.EFS file on the documentation diskette before installing the EFS. Copyright 1989,1997 Compaq Computer Corporation. All rights reserved. Copyright 1991,1997 The Santa Cruz Operation. All Rights Reserved Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.