SOFTPAQ NUMBER: SP2680 PART NUMBER: N/A FILE NAME: EFS311 TITLE: Compaq EFS 3.11 for SCO Open Server Release 3 VERSION: 3.11 LANGUAGE: English CATEGORY: Drivers/Servers PRODUCTS AFFECTED: Any Compaq Server Products OPERATING SYSTEM: SCO UNIX System V/386 Release 3.2 Version 4.0 with Maintenance Supplement 4.2 SCO Open Desktop or SCO Open Desktop Lite, Release 3.0 SCO Open Server Enterprise 3.0 SCO Open Server Network 3.0 SCO MPX Release 3.0 SYSTEM CONFIGURATION: Any Compaq system running one of the above operating systems. EFFECTIVE DATE: January 20, 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2360 DESCRIPTION: Creates the five (5) diskettes of Compaq Extended Feature Supplement (EFS) 3.11 for SCO Open Server Release 3, a collection of device drivers to provide maximum performance with Compaq hardware, and also utilities to monitor the performance of your Compaq server. The EFS functionality provided in this SoftPaq is included in the SmartStart installation. If you are not using SmartStart, use this SoftPaq to install EFS 3.11 with SCO Open Server Release 3. INSTALLATION ORDER System software must be installed in the following order: 1. SCO OPEN SERVER RELEASE 3.0 2. SCO Extended Utilities 3. Operating system supplements included in the product distribution. For example, multiprocessing support on the ProLiant 1500 and 5000 requires SCO Advanced Hardware Supplement 3.4 to be installed, followed by SCO Support Level Supplement (SLS) UOD421A. 4. Any other SCO products including SCO MPX or TCP/IP 5. Compaq Extended Feature Supplement 3.11 (EFS) for SCO OPEN SERVER RELEASE 3.0 (this software) 6. Any third party device drivers If the software products are not installed in the correct order, the kernel may not relink. CHANGES FROM EFS 3.10 o Netflex driver ported to MDI o Netflex 3 Fiber driver support DEVICE DRIVERS IN EFS 3.11 EFS 3.11 provides support for the following Compaq specific hardware not supported in the base operating system: o Compaq NetFlex Controller Support. o Compaq Netelligent Controller Support. o Compaq SCSI-2 Support. o Compaq 32-Bit Fast-SCSI-2 Controller Card. o Compaq 32-Bit Fast-Wide SCSI - 2/ E Controller Card. o Compaq 32-Bit Fast-Wide SCSI - 2/ P Controller Card. o Compaq Smart-2 /E Drive Array Support. o Compaq Smart -2 /P Drive Array Support. o Compaq System Wellness Driver. o Compaq Intelligent Drive Array Support. o Boot-Time Loadable Drivers. UTILITIES INCLUDED IN EFS 3.11 o SCSI-2 Management Utility. o Intelligent Drive Array (IDA) Diagnostic Utility. o Compaq System Monitor Utility. o Compaq UPS Support. o Compaq Pagemarq Support. o Compaq Single Launch Point Utility. HOW TO USE: IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE! Follow these steps to create the five (5) EFS 3.11 diskettes: 1. Download the SoftPaq to an empty directory and change to that directory. 2. From that drive and directory, execute the SoftPaq file: SP2680 [ENTER] The following files should be created: QRST.EXE EFS311._01 EFS311._02 EFS311._03 EFS311._04 EFS311._05 README.TXT 3. Obtain five (5) DOS formatted 1.44 MB diskettes IMPORTANT: Only 1.44 MB, DOS formatted diskettes can be used, other types of media cannot be substituted. 4. Follow the further instructions in README.TXT to create the diskettes by executing the QRST.EXE program and then read all information in the README.EFS file on the documentation diskette before installing the EFS. 5. After the diskettes are created, you may delete the downloaded file SP2680.EXE and the other files created on the hard drive if you wish. Copyright 1989,1997, Compaq Computer Corporation. All rights reserved. Copyright 1991,1997, The Santa Cruz Operation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies