SOFTPAQ NUMBER: SP10423 PART NUMBER: N/A FILE NAME: N/A TITLE: Workstation ProLiant Storage System Driver for Windows NT 4.0 VERSION: 2.04 Rev A SIGNIFICANT FILE VERSION: 2.04.1.1 LANGUAGE: English CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstations 5000, 6000, 8000, 5100, AP500, SP700 OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: October 18, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.x SUPERSEDES: N/A DESCRIPTION: This SoftPaq creates a set of files that provide support for the following subsystems and features of Compaq Professional Workstations: Compaq ProLiant Storage Systems NOTE: This driver's Setup program will only install the driver if the Compaq Proliant Storage System is present on the target system. If the Setup program returns exit code (0x1), then the driver did not get installed. ENHANCEMENTS/FIXES: - Adds support for Compaq System Software Manager (SSM). - Supports 15 drives and checks alarms for fan, temperature, and Hot Plug events. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the setup command below to start the installation of Software. SETUP.EXE [ENTER] Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.