#
#
#
installProgressLabelPrefix = Installing 
uninstallProgressLabelPrefix = Uninstalling 
Frame-Title-Text = {0} Version {1} Configuration Wizard.
Uninstall-Frame-Title-Text = {0} Version {1} Unconfiguration Wizard.
wb-ConsoleInteraction-HelpCommandLineOptionText = Options recognized by the Sun ONE Installer:\n\t-nodisplay     run installer in text only (non graphical) mode\n\t-noconsole     don't display non graphical text. Used with\n\t               nodisplay option for silent installs.\n\t-novalidate    no text field validation checking \n\t-saveState [statefile] save state of installer input\n\t-state [statefile] use the statefile for setting input values\n\n\t-debug         general debug info from Sun ONE Installer\n\t-debugMessage  output debugging information, includes errors and warnings\n\t-debugWarning  output warning message, includes errors\n\t-debugError    output error messages, on by default
wb-ConsoleInteraction-UnknownCommandLineOptionText=Unknown Option {0}

Progress-Reporter-Title-Text =  Please Wait
Installation-Progress-Message =  {0} Installation Progress...
Exit-Message =  Are you sure you want to exit the wizard?<p>If so, click Exit. Otherwise click Continue to resume.
Cancel-Message =  Are you sure you want to cancel the current operation?
Message-Dismiss = OK
wb-Gui-OnlineHelpTitleText = {0} Installation Online Help
wb-Gui-NoHelpAvailable = Sorry, no help is available for this subject.<p>Please report this problem to technical support at http://www.sun.com

#
#Button names so they can be localized/overridden on Setup SDK side
#
Back-Button = Back
Exit-Button = Cancel
Next-Button = Next
Help-Button = Help
Close-Button = Close
Exit-Dialog-Button = Exit
Exit-Dialog-Continue-Button = Continue

#
# Resources for com.iplanet.install.panels.common.UserBlockPanel
#

userBlockPanel-install-Gui-OnlineHelp =  The installation program is not able to properly run on this system because the user you are logged in as does not have full administration privileges for this system, such as the ability to administer services, update the registry, grant privileges, etc. <p>This problem must be resolved before the installation can continue. You cannot continue with the installation at this point you can only exit the installation program.

userBlockPanel-uninstall-Gui-OnlineHelp =  The uninstallation program is not able to properly run on this system because the user you are logged in as does not have full administration privileges for this system, such as the ability to administer services, update the registry, grant privileges, etc. <p>This problem must be resolved before the uninstallation can continue. You cannot continue with the uninstallation at this point you can only exit the uninstallation program.

userBlockPanel-Gui-HeaderText =  The installation program cannot run on this system

userBlockPanel-Gui-IntroText = The installation program has detected a problem that prevents the installation from proceeding:  <p>The user you are logged in as does not have the required privileges to run the installation program.<p>Please log out and log back in as a user that has full administration privileges for this system.<p>The installation program cannot continue until this problem is corrected.

userBlockPanel-ConsoleInteraction = <p>The installation program has detected a problem that prevents the installation from proceeding: <p>The user you are logged in as does not have the required privileges to run the installation program. <p>Please log out and log back in as a user that has full administration privileges for this system. <p> <Press Enter to Exit>

#
# Resources for com.iplanet.install.panels.common.UserWarnPanel
#   This is for <panel name="userWarn">
#

userWarnPanel-Gui-OnlineHelp = You are running this Setup program as a non-root user. <p>As a non-root user, you do not have the permissions to store the information from this program in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>It is recommended that you exit now and run the program as a root user.

userWarnPanel-Gui-HeaderText =  Warning: Running as non-root user

userWarnPanel-Gui-IntroText =  WARNING: You are not logged on as root. Unless you are logged on as root, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>Exit Setup and login as root or click Next to continue.

userWarnPanel-ConsoleInteraction =  WARNING: You are not logged on as root. Unless you are logged on as root, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p> Press Enter.

userWarnPanel-Gui-OnlineHelpNT =  You are not running this Setup program as an administrator. <p>Ensure that you minimally have administrative privileges on this machine. Without administrative privileges, you do not have the permissions to store the information from this program in the system registry. <p>In order to facilitate future upgrades/uninstalls, exit the Setup program and run it as root.

userWarnPanel-Gui-HeaderTextNT =  Warning: Not running as administrator

userWarnPanel-Gui-IntroTextNT =  WARNING: You are not logged on as <b>administrator</b>. Unless you are logged on as <b>administrator</b> or another account with local administrative privileges, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>Exit Setup and login as <b>administrator</b> or click Next to continue.

userWarnPanel-ConsoleInteractionNT =  WARNING: You are not logged on as <b>administrator</b>. Unless you are logged on as <b>administrator</b> or have local administrative privileges, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p> Press Enter.

#
# Resources for com.iplanet.install.panels.common.WelcomePanel
#

welcomePanel-install-Gui-IntroText =  Welcome to the {0} Configuration Program. <p>We strongly recommend that you exit all programs before running this configuration program. <p>WARNING: This program is protected by copyright law and international treaties.<p>This product is distributed under licenses restricting its use, copying, distribution, and decompilation. No part of the product may be reproduced in any form by any means without prior written authorization of Sun Microsystems Inc. and its licensors, if any. Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.

welcomePanel-uninstall-Gui-IntroText = Welcome to the {0} Uninstallation Program. We strongly recommend that you exit all programs before running this program.

welcomePanel-Gui-HeaderText =  Welcome 

welcomePanel-install-Gui-OnlineHelp = Welcome to the configuration of <b>{0}</b>. <p>This program asks you to supply configuration settings.<p>At the bottom of each panel are navigation buttons that let you move through the configuration program: <ul> <li>'Back' returns you to the previous panel </li> <li>'Next' takes you to the next panel. </li> <li>'Exit' ends the configuration program without configuring the product.</li>  <li>'Help' displays help information about the panel currently displayed.</li> <li>'OK' exits the online help panel and returns you to the configuration program.</li> </ul>

welcomePanel-uninstall-Gui-OnlineHelp = Welcome to the uninstallation of <b>{0}</b>. <p>This program asks you to supply configuration settings.<p>At the bottom of each panel are navigation buttons that let you move through the uninstallation program: <ul> <li>'Back' returns you to the previous panel </li> <li>'Next' takes you to the next panel. </li> <li>'Exit' ends the uninstallation program without uninstalling the product.</li>  <li>'Help' displays help information about the panel currently displayed.</li> <li>'OK' exits the online help panel and returns you to the uninstallation program.</li> </ul>

welcomePanel-ConsoleInteraction = <p>You are running the configuration program for {0}. This program asks you to supply configuration preference settings that it uses to configure the server. <p>The configuration program consists of one or more selections that provide you with information and let you enter preferences that determine how {0} is configured. <P>When you are presented with the following question, the configuration process pauses to allow you to read the information that has been presented. When you are ready, press Enter to continue. <P> <Press ENTER to Continue>  <P>Some questions require more detailed information that you are required to type. The question may have a default value that is displayed inside of brackets []. For example, the following question has a default answer of yes: <P>   Are you sure? [yes] <P>If you want to accept the default answer, press only the Enter key (which on some keyboards is labeled Return). <P>If you want to provide a different answer, type it at the command prompt and then press Enter. <p>If yes is your answer, type 'yes' or 'y' at the command prompt and press Enter. If your answer is no, type 'no' or 'n' and press Enter.  <p>At any point in the configuration program, if you wish to exit the configuration program midway, press the '!' key and you will be given the option to exit or continue. <P> <Press ENTER to Continue> 

welcomePanel-ConsoleInteraction2 = <p>Welcome to the {0} Configuration Program. <p>We strongly recommend that you exit all programs before running this configuration program. <p>WARNING: This program is protected by copyright law and international treaties.<p>This product is distributed under licenses restricting its use, copying, distribution, and decompilation. No part of the product may be reproduced in any form by any means without prior written authorization of Sun Microsystems Inc. and its licensors, if any. Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.<p> <Press ENTER to Continue>

#
# Resources for com.iplanet.install.panels.common.LicensePanel
#

licensePanel-Gui-IntroText = Before you can install this product, you must read and accept the agreement under which this product is licensed for your use.

licensePanel-Gui-IntroText2 = Have you read, and do you accept, all of the terms of the preceding Software License Agreement? If you choose No, the installation program will end without installing the product.

licensePanel-Gui-HeaderText = Software License Agreement

licensePanel-Gui-noButton = Decline

licensePanel-Gui-yesButton = Accept

licensePanel-install-Gui-OnlineHelp = Before you install this product, you must read and accept the entire Software License Agreement under which this product is licensed for your use. <p>If you have read and accept all the terms of the entire Software License Agreement, click 'Yes (Accept License)' to continue with the installation. <p>If you do not accept all the terms of the Software License Agreement, click 'No' to end the installation program without installing the product.

licensePanel-ConsoleInteraction = \nTo configure this software, you must read and accept the entire following Software Licence Agreement. After reading the agreement, you will then be given the opportunity to accept or refuse the licensing terms. Failing to accept the terms of the Software License Agreement will cause the configuration program to end without configuring the product. \n <Press ENTER to display the Software License Agreement> 

licensePanel-ConsoleInteraction2 = \nHave you read, and do you accept, all of the terms of the preceding Software License Agreement? If so, choose 'yes' and the installation will continue. If not, choose 'no' and the installation program will end without installing the product.

licensePanel-ConsoleInteraction2-noAnswer = no

licensePanel-ConsoleInteraction2-noAnswer1 = n

licensePanel-ConsoleInteraction2-yesAnswer = yes

licensePanel-ConsoleInteraction2-yesAnswer1 = y

licensePanel-Gui-LicenseText = Sun Microsystems, Inc.\nLicense Terms\nSun ONE Messaging Server 6.0\n\nIF YOU HAVE PAID IN FULL ALL CORRESPONDING FEES AND CHARGES IN CONNECTION WITH A LICENSE FOR SUN ONE MESSAGING SERVER 6.0 (ALONG WITH ANY AND ALL ACCOMPANYING SOFTWARE AND DOCUMENTATION, THE "PRODUCT"), YOUR LICENSE TO THE PRODUCT IS SET FORTH ENTIRELY IN SECTION B. OTHERWISE, YOUR EVALUATION LICENSE TO THE PRODUCT IS SET FORTH ENTIRELY IN SECTION A. The two licenses set forth in Sections A and B are separate and distinct legal agreements.\n\nREAD THE TERMS OF THE AGREEMENT IN THE SECTION APPLICABLE TO YOU (THE "APPLICABLE AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWARE MEDIA PACKAGE. BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO ALL THE TERMS OF THE APPLICABLE AGREEMENT. IF YOU ARE ACCESSING THE PRODUCT ELECTRONICALLY, INDICATE YOUR COMPLETE ACCEPTANCE OF THIS AGREEMENT BY SELECTING THE "ACCEPT" BUTTON DISPLAYED ALONG WITH THE APPLICABLE AGREEMENT OR OTHERWISE PROVIDING THE AFFIRMATIVE RESPONSE REQUESTED. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THE APPLICABLE AGREEMENT, DO NOT INSTALL, COPY OR OTHERWISE USE THE PRODUCT. IF YOU ARE ACCESSING THE PRODUCT ELECTRONICALLY, INDICATE YOUR NON-ACCEPTANCE OF THE APPLICABLE AGREEMENT BY SELECTING THE "REJECT" BUTTON OR OTHERWISE PROVIDING THE NEGATIVE RESPONSE REQUESTED. YOUR INSTALLATION, COPYING OR USE OF THE PRODUCT INDICATES THAT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THE APPLICABLE AGREEMENT.\n\nIf you are accepting the Applicable Agreement on behalf of a corporation, partnership or other legal entity, the use of the terms "you" and "your" in the Applicable Agreement will refer to such entity and the entity accepting the Applicable Agreement represents and warrants to Sun that it has sufficient permissions, capacity, consents and authority to enter into the Applicable Agreement.\n\nSECTION A:\n\nSun Microsystems, Inc.\nBinary Software Evaluation Agreement ("Agreement")\n\n1.0 DEFINITIONS\n"Licensed Software" means all or any portion of the Sun ONE Messaging Server 6.0 in binary form (the "Product"), and any other machine readable materials (including, but not limited to, libraries, header files, and data files), additional software, user manuals, programming guides and other documentation provided to you by Sun Microsystems, Inc. ("Sun") as part of, or embedded with, the files that comprise the Product.\n\n2.0 LIMITED LICENSE\nSubject to the terms and conditions of this Agreement and your complete acceptance of this Agreement, Sun grants to you a non-exclusive, non-transferable, royalty-free and limited license to use Licensed Software solely for the purposes of evaluation of the Licensed Software and internal design, development, testing and evaluation of software products developed by you. No license is granted to you for any other purpose. You may not sell, rent, loan or otherwise encumber or transfer Licensed Software, in whole or in part, to any third party, including any output or results of execution of the Licensed Software.\n\n3.0 LICENSE RESTRICTIONS\n\n3.1 You may not duplicate the Licensed Software other than for a single copy of binary portions of the Licensed Software for backup purposes only. You agree to reproduce all copyright and other proprietary right notices on any such copy.\n\n3.2 Except as otherwise provided by law, you may not modify or create derivative works of the Licensed Software, or reverse engineer, disassemble or decompile binary portions of the Licensed Software, otherwise attempt to derive the source code from such portions, or assist any other person or entity in any of these activities.\n\n3.3 No right, title, or interest in or to the Licensed Software, any trademarks, service marks, or trade names of Sun or Sun's licensors is granted under this Agreement.\n\n3.4 You have no right to use the Licensed Software in a production environment, for commercial use, or for operational purposes.\n\n3.5 You acknowledge that Licensed Software may contain a timebomb mechanism.\n\n3.6 Whenever you are explicitly permitted to copy or reproduce all or any part of the Software, you shall reproduce and not efface any and all titles, trademark symbols, copyright symbols and legends, and other proprietary markings on or accompanying the Software.\n\n3.7 You may not publish or provide the results of any benchmark or comparison tests run on the Licensed Software to any third party without Sun's prior written consent.\n\n4.0 NO FURTHER OBLIGATIONS\nNeither Sun nor its licensors are under any obligation to support the Licensed Software or to provide you with updates or error corrections (collectively "Software Updates"). If Sun, at its sole option, supplies Software Updates to you, the Software Updates will be considered part of Licensed Software, and subject to the terms of this Agreement. Further, neither Sun nor its licensors are under any obligation to develop, market, sell, distribute or take any other action with respect to the Licensed Software or to provide or ensure compatibility between the Licensed Software and any future version of the Licensed Software.\n\n5.0 TERM AND TERMINATION OF AGREEMENT\n\n5.1 This Agreement will commence on the date on which you install the Licensed Software (the "Effective Date") and will terminate 60 days from the Effective Date, unless terminated earlier as set forth below.However, if the Licensed Software does not require installation for use, the Effective Date is the date that you accept this Agreement.\n\n5.2 You may terminate this Agreement at any time by completely destroying all copies of the Licensed Software and removing all portions of the Licensed Software that you deployed on any electronic device (including without limitation, computer systems, servers, networks, and personal electronic devices).\n\n5.3 Sun may terminate this Agreement upon 10 days' written notice to you. However, Sun may terminate this Agreement immediately should any Licensed Software become, or in Sun's and/or its licensors' opinion be likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation. \n\n5.4 Sun may terminate this Agreement immediately should you materially breach any of its provisions or take any action in derogation of Sun's and/or its licensors' rights to the Licensed Software.\n\n5.5 Within ten (10) days from termination or expiration of this Agreement, you will immediately cease use of and destroy Licensed Software and any copies thereof and provide Sun a written statement from a duly authorized representative certifying that you have complied with the foregoing obligations.\n\n5.6 The following sections will survive any termination or expiration of this Agreement: Sections 1.0, 3.0, 4.0, 5.5, 5.6, and 6.0-9.0. You shall have no rights to recover damages or seek indemnification arising from rightful termination or expiration of this Agreement, whether by way of lost profits, expenditures, payment of goodwill or otherwise.\n\n6.0 DISCLAIMER OF WARRANTY\n\n6.1 You acknowledge that Licensed Software may contain errors and is not designed or intended for use in the design, construction, operation or maintenance of any nuclear facility ("High Risk Activities"). Sun and its licensors disclaim any express or implied warranty of fitness for such uses. You represent and warrant to Sun that you will not use, distribute or license the Licensed Software for High Risk Activities.\n\n6.2 LICENSED SOFTWARE IS PROVIDED "AS IS". TO THE FULLEST EXTENT ALLOWED BY LAW, SUN EXPRESSLY DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES OF ANY KIND OR NATURE CONCERNING THE LICENSED SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT. \n\n7.0 LIMITATION OF LIABILITY\n\n7.1 You acknowledge that the Licensed Software may have defects or deficiencies that cannot or will not be corrected by Sun. You will hold Sun and its licensors harmless from any claims based on your use of the Licensed Software for any purposes, and from any claims that later versions or releases of any Licensed Software furnished to you are incompatible with the Licensed Software provided to you under this Agreement.\n\n7.2 You shall have the sole responsibility to protect adequately and backup your data and/or equipment used in connection with the Licensed Software. You shall not claim against Sun or its licensors for lost data, re-run time, inaccurate output, work delays or lost profits resulting from your use of the Licensed Software. \n\n7.3 You acknowledge that Sun is under no obligation to release the Licensed Software as a product of Sun or to offer any further releases, versions, enhancements, or updates of the Licensed Software or any bug fixes or corrections for the Licensed Software.\n\n7.4 NEITHER SUN NOR ANY OF SUN'S LICENSORS WILL BE LIABLE FOR ANY INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THIS AGREEMENT (INCLUDING LOSS OF BUSINESS, REVENUE, PROFITS, USE, DATA OR OTHER ECONOMIC ADVANTAGE), HOWEVER IT ARISES, WHETHER FOR BREACH OR IN TORT, EVEN IF THAT PARTY HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LIABILITY FOR DAMAGES WILL BE LIMITED AND EXCLUDED, EVEN IF ANY EXCLUSIVE REMEDYPROVIDED IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT WILL THE CUMMULATIVE LIABILITY OF SUN FOR ANY DAMAGES WHATSOEVER INCURRED BY YOU ARISING OUT OF OR RELATED TO THIS AGREEMENT EXCEED THE TOTAL AMOUNT ACTUALLY PAID TO SUN BY YOU UNDER THIS AGREEMENT. \n\n8.0 U.S. GOVERNMENT RESTRICTED RIGHTS.\nIf Licensed Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in the Licensed Software will be only as set forth in this Agreement; this is in accordance with 48 CFR 227.7201 through 227.7202-4 (for Department of Defense (DOD) acquisitions) and with 48 CFR 2.101 and 12.212 (for non-DOD acquisitions).\n\n9.0 GENERAL TERMS\n\n9.1 This Agreement will be governed by and construed in accordance with the laws of the State of California, U.S.A., excluding its conflict of laws principles. You expressly agree and consent that exclusive jurisdiction and venue for any dispute arising out of or relating to this Agreement will lie with the federal and state courts located in and serving Santa Clara County, California, U.S.A. The U.N. Convention for the International Sale of Goods and the choice of law rules of any jurisdiction will not apply. The official text of this Agreement is in the English language and any interpretation or construction of this Agreement will be based thereon. In the event that this Agreement or any documents or notices related to it are translated into any other language, the English language version will control.\n\n9.2 Licensed Software and technical data delivered under this Agreement are subject to U.S. export control laws and may be subject to export or import regulations in other countries. You agree to comply strictly with all such laws and regulations and acknowledge that you have the responsibility to obtain such licenses to export, re-export or import as may be required after delivery to you. Unless authorized by the U.S. Government, you will not, directly or indirectly, export or re-export Licensed Software, nor direct products therefrom, to any embargoed or restricted country identified in the U.S. export laws, including but not limited to the Export Administration Regulations 15 C.F.R. Parts 730-774). You affirm that you are not identified on any U.S. Government export exclusion lists and that you will not use Licensed Software for nuclear missile, chemical biological weaponry, or other weapons of mass destruction.\n\n9.3 It is understood and agreed that, notwithstanding any other provision of this Agreement, your breach of the provisions of Sections 2.0, or 3.0 of this Agreement will cause Sun and/or its licensors irreparable damage for which recovery of money damages would be inadequate, and that Sun and/or its licensors will therefore be entitled to seek timely injunctive relief, without the necessity of posting bond or other security, to protect Sun's and/or its licensors' rights under this Agreement in addition to any and all remedies available at law. \n\n9.4 You may not assign or otherwise transfer any of your rights or obligations under this Agreement, without the prior written consent of Sun.\n\n9.5 If any provision of this Agreement is held invalid by any law or regulation of any government or by any court, such invalidity will not affect the enforceability of any other provisions.\n\n9.6 Any express waiver or failure to exercise promptly any right under this Agreement will not create a continuing waiver or any expectation of non-enforcement.\n\n9.7 This Agreement is the parties' entire agreement relating to its subject matter. It supersedes all prior or contemporaneous oral or written communications, proposals, conditions, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement. No modification to this Agreement will be binding, unless in writing and signed by an authorized representative of each party.\n\nSECTION B:\n\nSun Microsystems, Inc.\nBinary Code License Agreement\n\nREAD THE TERMS OF THIS AGREEMENT AND ANY PROVIDED SUPPLEMENTAL LICENSE TERMS (COLLECTIVELY "AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWARE MEDIA PACKAGE.  BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO THE TERMS OF THIS AGREEMENT.  IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE YOUR ACCEPTANCE OF THESE TERMS BY SELECTING THE "ACCEPT" BUTTON AT THE END OF THIS AGREEMENT.  IF YOU DO NOT AGREE TO ALL THESE TERMS, PROMPTLY RETURN THE UNUSED SOFTWARE TO YOUR PLACE OF PURCHASE FOR A REFUND OR, IF THE SOFTWARE IS ACCESSED ELECTRONICALLY, SELECT THE "DECLINE" BUTTON AT THE END OF THIS AGREEMENT. \n\n1.  LICENSE TO USE.  Sun grants you a non-exclusive and non-transferable license for the internal use only of the accompanying software and documentation and any error corrections provided by Sun (collectively "Software"), by the number of users and the class of computer hardware for which the corresponding fee has been paid.\n\n2.  RESTRICTIONS  Software is confidential and copyrighted. Title to Software and all associated intellectual property rights is retained by Sun and/or its licensors.  Except as specifically authorized in any Supplemental License Terms, you may not make copies of Software, other than a single copy of  Software for archival purposes.  Unless enforcement is prohibited by applicable law, you may not modify, decompile, or reverse engineer Software. You acknowledge that Software is not designed, licensed or intended for use in the design, construction, operation or maintenance of any nuclear facility.  Sun disclaims any express or implied warranty of fitness for such uses.  No right, title or interest in or to any trademark, service mark, logo or trade name of Sun or its licensors is granted under this Agreement.\n\n3. LIMITED WARRANTY.  Sun warrants to you that for a period of ninety (90) days from the date of purchase, as evidenced by a copy of the receipt, the media on which Software is furnished (if any) will be free of defects in materials and workmanship under normal use. Except for the foregoing, Software is provided "AS IS".  Your exclusive remedy and Sun's entire liability under this limited warranty will be at Sun's option to replace Software media or refund the fee paid for Software.\n\n4.  DISCLAIMER OF WARRANTY.  UNLESS SPECIFIED IN THIS AGREEMENT, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT THESE DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.\n\n5.  LIMITATION OF LIABILITY.  TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  In no event will Sun's liability to you, whether in contract, tort (including negligence), or otherwise, exceed the amount paid by you for Software under this Agreement.  The foregoing limitations will apply even if the above stated warranty fails of its essential purpose.\n\n6.  Termination.  This Agreement is effective until terminated.  You may terminate this Agreement at any time by destroying all copies of Software.  This Agreement will terminate immediately without notice from Sun if you fail to comply with any provision of this Agreement.  Upon Termination, you must destroy all copies of Software.\n\n7.  Export Regulations.  All Software and technical data delivered under this Agreement are subject to US export control laws and may be subject to export or import regulations in other countries. You agree to comply strictly with all such laws and regulations and acknowledge that you have the responsibility to obtain such licenses to export, re-export, or import as may be required after delivery to you.\n\n8.  U.S. Government Restricted Rights.  If Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in Software and accompanying documentation will be only as set forth in this Agreement; this is in accordance with 48 CFR 227.7201 through 227.7202-4 (for Department of Defense (DOD) acquisitions) and with 48 CFR 2.101 and 12.212 (for non-DOD acquisitions).\n\n9.  Governing Law.  Any action related to this Agreement will be governed by California law and controlling U.S. federal law.  No choice of law rules of any jurisdiction will apply.\n\n10.  Severability. If any provision of this Agreement is held to be unenforceable, this Agreement will remain in effect with the provision omitted, unless omission would frustrate the intent of the parties, in which case this Agreement will immediately terminate.\n\n11.  Integration.  This Agreement is the entire agreement between you and Sun relating to its subject matter.  It supersedes all prior or contemporaneous oral or written communications, proposals, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement.  No modification of this Agreement will be binding, unless in writing and signed by an authorized representative of each party.\n\nFor inquiries please contact: Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054\n\n\nSun Microsystems, Inc.\nSupplemental Terms for\nSun ONE Messaging Server 6.0\n\nThese terms for Sun ONE Messaging Server 6.0 supplement the terms of the Binary Code License Agreement ("BCL").  Capitalized terms not defined herein shall have the meanings ascribed to them in the BCL.  These terms shall supersede any inconsistent or conflicting terms in the BCL.\n\n1. Definitions.\n\na. "Service Provider Services" means providing e-mail and e-mail administration services with Software to Service Provider Users.\n\nb. " Corporate Services" means providing e-mail services with Software configured for internal business use only.\n\nc. "User(s)" means collectively Service Provider Users and Corporate Users:\n\n(i) "Service Provider User(s)" means any combination of individual or corporate users, authorized to access service provider services provided to that individual, corporation or legal entity, by you and not for resale or redistribution in any manner.\n\n(ii) "Corporate User(s)" means any individual, within a corporation or other legal entity, authorized to access e-mail services configured for business or commercial use only, and not for resale or redistribution in any manner\n\nd. " Mail Routing Services" means any use of Software in a manner where Software's primary purpose is as a relay agent (e.g. receiving and sending email but not delivering it).\n\ne. "Designated CPU(s)" means the single central processing unit ("CPU") upon which Software is to be loaded by you in order to provide Mail Routing Services. \n\n2. License to Use.  Sun grants you a non-exclusive and non-transferable license for the internal use only of the Software, by the number of Users and/or Designated CPUs for which the corresponding fee has been paid as follows:\n\na. For Service Provider Services.\n\n(i) You may use the Software to provide Service Provider Services to the number of Service Provider Users for which you have paid the corresponding fee.  This Agreement does not allow use of the Software for Mail Routing Services, unless you have paid the corresponding fee for such usage.\n\n(ii) You may enable and use the Delegated Management feature contained in the Software for the number of Users for which you have paid the corresponding fee for such usage. \n\nA. For Corporate Services.  You may use the Software to provide Corporate Services to the number of Corporate Users for which you have paid the corresponding fee.  This Agreement does not allow use of the Software for Mail Routing Services, unless you have paid the corresponding fee for such usage.\n\nB. For Mail Routing Services.  You may use the Software to provide Mail Routing Services only on the number of Designated CPU(s) for which you have paid the corresponding fee for such usage. \n\n3. Directory Server Restrictions.  You may use the Directory Services ("DS") software components of the Software, only for embedded Directory Server services and not to provide Directory Server services for other software products or to provide stand-alone Directory Server services without first obtaining a separate DS license from Sun.\n\n4. Web Server Restrictions.  You may use the Web Server Services ("WS") software components of the Software, only for embedded Web Server services and not to provide Web Server services for other software products or to provide stand-alone Web Server services without first obtaining a separate WS license from Sun. \n\n5. Identity Server Restrictions.  You may use the Identity Server Services ("IS") software components of the Software, only for embedded Identity Server services and not to provide Identity Server services for other software products or to provide stand-alone Identity Server services without first obtaining a separate IS license from Sun.\n\n6. Delegated Administration Server Restrictions.  You may use the Delegated Administration Services ("DA") software components of the Software, only for embedded Delegated Administration services and not to provide Delegated Administration services for other software products or to provide stand-alone Delegated Administration services without first obtaining a separate DA license from Sun.\n\n7. Additional Restrictions.  You may not publish or provide the results of any benchmark or comparison tests run on Software to any third party without the prior written consent of Sun.\n\n8. Third Party Code.  Additional copyright notices and license terms applicable to portions of the Software are set forth in the THIRDPARTYLICENSEREADME file. In addition to any terms and conditions of any third party opensource/freeware license identified in the THIRDPARTYLICENSEREADME file, the disclaimer of warranty and limitation of liability provisions in paragraphs 5 and 6 of the Binary Code License Agreement shall apply to all Software in this distribution\n\n(LFI#133413)\n

licensePanel-ConsoleInteraction-LicenseText = Sun Microsystems, Inc.\nLicense Terms\nSun ONE Messaging Server 6.0\n\nIF YOU HAVE PAID IN FULL ALL CORRESPONDING FEES AND CHARGES IN CONNECTION WITH A LICENSE FOR SUN ONE MESSAGING SERVER 6.0 (ALONG WITH ANY AND ALL ACCOMPANYING SOFTWARE AND DOCUMENTATION, THE "PRODUCT"), YOUR LICENSE TO THE PRODUCT IS SET FORTH ENTIRELY IN SECTION B. OTHERWISE, YOUR EVALUATION LICENSE TO THE PRODUCT IS SET FORTH ENTIRELY IN SECTION A. The two licenses set forth in Sections A and B are separate and distinct legal agreements.\n\nREAD THE TERMS OF THE AGREEMENT IN THE SECTION APPLICABLE TO YOU (THE "APPLICABLE AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWARE MEDIA PACKAGE. BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO ALL THE TERMS OF THE APPLICABLE AGREEMENT. IF YOU ARE ACCESSING THE PRODUCT ELECTRONICALLY, INDICATE YOUR COMPLETE ACCEPTANCE OF THIS AGREEMENT BY SELECTING THE "ACCEPT" BUTTON DISPLAYED ALONG WITH THE APPLICABLE AGREEMENT OR OTHERWISE PROVIDING THE AFFIRMATIVE RESPONSE REQUESTED. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THE APPLICABLE AGREEMENT, DO NOT INSTALL, COPY OR OTHERWISE USE THE PRODUCT. IF YOU ARE ACCESSING THE PRODUCT ELECTRONICALLY, INDICATE YOUR NON-ACCEPTANCE OF THE APPLICABLE AGREEMENT BY SELECTING THE "REJECT" BUTTON OR OTHERWISE PROVIDING THE NEGATIVE RESPONSE REQUESTED. YOUR INSTALLATION, COPYING OR USE OF THE PRODUCT INDICATES THAT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THE APPLICABLE AGREEMENT.\n\nIf you are accepting the Applicable Agreement on behalf of a corporation, partnership or other legal entity, the use of the terms "you" and "your" in the Applicable Agreement will refer to such entity and the entity accepting the Applicable Agreement represents and warrants to Sun that it has sufficient permissions, capacity, consents and authority to enter into the Applicable Agreement.\n\nSECTION A:\n\nSun Microsystems, Inc.\nBinary Software Evaluation Agreement ("Agreement")\n\n1.0 DEFINITIONS\n"Licensed Software" means all or any portion of the Sun ONE Messaging Server 6.0 in binary form (the "Product"), and any other machine readable materials (including, but not limited to, libraries, header files, and data files), additional software, user manuals, programming guides and other documentation provided to you by Sun Microsystems, Inc. ("Sun") as part of, or embedded with, the files that comprise the Product.\n\n2.0 LIMITED LICENSE\nSubject to the terms and conditions of this Agreement and your complete acceptance of this Agreement, Sun grants to you a non-exclusive, non-transferable, royalty-free and limited license to use Licensed Software solely for the purposes of evaluation of the Licensed Software and internal design, development, testing and evaluation of software products developed by you. No license is granted to you for any other purpose. You may not sell, rent, loan or otherwise encumber or transfer Licensed Software, in whole or in part, to any third party, including any output or results of execution of the Licensed Software.\n\n3.0 LICENSE RESTRICTIONS\n\n3.1 You may not duplicate the Licensed Software other than for a single copy of binary portions of the Licensed Software for backup purposes only. You agree to reproduce all copyright and other proprietary right notices on any such copy.\n\n3.2 Except as otherwise provided by law, you may not modify or create derivative works of the Licensed Software, or reverse engineer, disassemble or decompile binary portions of the Licensed Software, otherwise attempt to derive the source code from such portions, or assist any other person or entity in any of these activities.\n\n3.3 No right, title, or interest in or to the Licensed Software, any trademarks, service marks, or trade names of Sun or Sun's licensors is granted under this Agreement.\n\n3.4 You have no right to use the Licensed Software in a production environment, for commercial use, or for operational purposes.\n\n3.5 You acknowledge that Licensed Software may contain a timebomb mechanism.\n\n3.6 Whenever you are explicitly permitted to copy or reproduce all or any part of the Software, you shall reproduce and not efface any and all titles, trademark symbols, copyright symbols and legends, and other proprietary markings on or accompanying the Software.\n\n3.7 You may not publish or provide the results of any benchmark or comparison tests run on the Licensed Software to any third party without Sun's prior written consent.\n\n4.0 NO FURTHER OBLIGATIONS\nNeither Sun nor its licensors are under any obligation to support the Licensed Software or to provide you with updates or error corrections (collectively "Software Updates"). If Sun, at its sole option, supplies Software Updates to you, the Software Updates will be considered part of Licensed Software, and subject to the terms of this Agreement. Further, neither Sun nor its licensors are under any obligation to develop, market, sell, distribute or take any other action with respect to the Licensed Software or to provide or ensure compatibility between the Licensed Software and any future version of the Licensed Software.\n\n5.0 TERM AND TERMINATION OF AGREEMENT\n\n5.1 This Agreement will commence on the date on which you install the Licensed Software (the "Effective Date") and will terminate 60 days from the Effective Date, unless terminated earlier as set forth below.However, if the Licensed Software does not require installation for use, the Effective Date is the date that you accept this Agreement.\n\n5.2 You may terminate this Agreement at any time by completely destroying all copies of the Licensed Software and removing all portions of the Licensed Software that you deployed on any electronic device (including without limitation, computer systems, servers, networks, and personal electronic devices).\n\n5.3 Sun may terminate this Agreement upon 10 days' written notice to you. However, Sun may terminate this Agreement immediately should any Licensed Software become, or in Sun's and/or its licensors' opinion be likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation. \n\n5.4 Sun may terminate this Agreement immediately should you materially breach any of its provisions or take any action in derogation of Sun's and/or its licensors' rights to the Licensed Software.\n\n5.5 Within ten (10) days from termination or expiration of this Agreement, you will immediately cease use of and destroy Licensed Software and any copies thereof and provide Sun a written statement from a duly authorized representative certifying that you have complied with the foregoing obligations.\n\n5.6 The following sections will survive any termination or expiration of this Agreement: Sections 1.0, 3.0, 4.0, 5.5, 5.6, and 6.0-9.0. You shall have no rights to recover damages or seek indemnification arising from rightful termination or expiration of this Agreement, whether by way of lost profits, expenditures, payment of goodwill or otherwise.\n\n6.0 DISCLAIMER OF WARRANTY\n\n6.1 You acknowledge that Licensed Software may contain errors and is not designed or intended for use in the design, construction, operation or maintenance of any nuclear facility ("High Risk Activities"). Sun and its licensors disclaim any express or implied warranty of fitness for such uses. You represent and warrant to Sun that you will not use, distribute or license the Licensed Software for High Risk Activities.\n\n6.2 LICENSED SOFTWARE IS PROVIDED "AS IS". TO THE FULLEST EXTENT ALLOWED BY LAW, SUN EXPRESSLY DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES OF ANY KIND OR NATURE CONCERNING THE LICENSED SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT. \n\n7.0 LIMITATION OF LIABILITY\n\n7.1 You acknowledge that the Licensed Software may have defects or deficiencies that cannot or will not be corrected by Sun. You will hold Sun and its licensors harmless from any claims based on your use of the Licensed Software for any purposes, and from any claims that later versions or releases of any Licensed Software furnished to you are incompatible with the Licensed Software provided to you under this Agreement.\n\n7.2 You shall have the sole responsibility to protect adequately and backup your data and/or equipment used in connection with the Licensed Software. You shall not claim against Sun or its licensors for lost data, re-run time, inaccurate output, work delays or lost profits resulting from your use of the Licensed Software. \n\n7.3 You acknowledge that Sun is under no obligation to release the Licensed Software as a product of Sun or to offer any further releases, versions, enhancements, or updates of the Licensed Software or any bug fixes or corrections for the Licensed Software.\n\n7.4 NEITHER SUN NOR ANY OF SUN'S LICENSORS WILL BE LIABLE FOR ANY INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THIS AGREEMENT (INCLUDING LOSS OF BUSINESS, REVENUE, PROFITS, USE, DATA OR OTHER ECONOMIC ADVANTAGE), HOWEVER IT ARISES, WHETHER FOR BREACH OR IN TORT, EVEN IF THAT PARTY HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LIABILITY FOR DAMAGES WILL BE LIMITED AND EXCLUDED, EVEN IF ANY EXCLUSIVE REMEDYPROVIDED IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT WILL THE CUMMULATIVE LIABILITY OF SUN FOR ANY DAMAGES WHATSOEVER INCURRED BY YOU ARISING OUT OF OR RELATED TO THIS AGREEMENT EXCEED THE TOTAL AMOUNT ACTUALLY PAID TO SUN BY YOU UNDER THIS AGREEMENT. \n\n8.0 U.S. GOVERNMENT RESTRICTED RIGHTS.\nIf Licensed Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in the Licensed Software will be only as set forth in this Agreement; this is in accordance with 48 CFR 227.7201 through 227.7202-4 (for Department of Defense (DOD) acquisitions) and with 48 CFR 2.101 and 12.212 (for non-DOD acquisitions).\n\n9.0 GENERAL TERMS\n\n9.1 This Agreement will be governed by and construed in accordance with the laws of the State of California, U.S.A., excluding its conflict of laws principles. You expressly agree and consent that exclusive jurisdiction and venue for any dispute arising out of or relating to this Agreement will lie with the federal and state courts located in and serving Santa Clara County, California, U.S.A. The U.N. Convention for the International Sale of Goods and the choice of law rules of any jurisdiction will not apply. The official text of this Agreement is in the English language and any interpretation or construction of this Agreement will be based thereon. In the event that this Agreement or any documents or notices related to it are translated into any other language, the English language version will control.\n\n9.2 Licensed Software and technical data delivered under this Agreement are subject to U.S. export control laws and may be subject to export or import regulations in other countries. You agree to comply strictly with all such laws and regulations and acknowledge that you have the responsibility to obtain such licenses to export, re-export or import as may be required after delivery to you. Unless authorized by the U.S. Government, you will not, directly or indirectly, export or re-export Licensed Software, nor direct products therefrom, to any embargoed or restricted country identified in the U.S. export laws, including but not limited to the Export Administration Regulations 15 C.F.R. Parts 730-774). You affirm that you are not identified on any U.S. Government export exclusion lists and that you will not use Licensed Software for nuclear missile, chemical biological weaponry, or other weapons of mass destruction.\n\n9.3 It is understood and agreed that, notwithstanding any other provision of this Agreement, your breach of the provisions of Sections 2.0, or 3.0 of this Agreement will cause Sun and/or its licensors irreparable damage for which recovery of money damages would be inadequate, and that Sun and/or its licensors will therefore be entitled to seek timely injunctive relief, without the necessity of posting bond or other security, to protect Sun's and/or its licensors' rights under this Agreement in addition to any and all remedies available at law. \n\n9.4 You may not assign or otherwise transfer any of your rights or obligations under this Agreement, without the prior written consent of Sun.\n\n9.5 If any provision of this Agreement is held invalid by any law or regulation of any government or by any court, such invalidity will not affect the enforceability of any other provisions.\n\n9.6 Any express waiver or failure to exercise promptly any right under this Agreement will not create a continuing waiver or any expectation of non-enforcement.\n\n9.7 This Agreement is the parties' entire agreement relating to its subject matter. It supersedes all prior or contemporaneous oral or written communications, proposals, conditions, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement. No modification to this Agreement will be binding, unless in writing and signed by an authorized representative of each party.\n\nSECTION B:\n\nSun Microsystems, Inc.\nBinary Code License Agreement\n\nREAD THE TERMS OF THIS AGREEMENT AND ANY PROVIDED SUPPLEMENTAL LICENSE TERMS (COLLECTIVELY "AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWARE MEDIA PACKAGE.  BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO THE TERMS OF THIS AGREEMENT.  IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE YOUR ACCEPTANCE OF THESE TERMS BY SELECTING THE "ACCEPT" BUTTON AT THE END OF THIS AGREEMENT.  IF YOU DO NOT AGREE TO ALL THESE TERMS, PROMPTLY RETURN THE UNUSED SOFTWARE TO YOUR PLACE OF PURCHASE FOR A REFUND OR, IF THE SOFTWARE IS ACCESSED ELECTRONICALLY, SELECT THE "DECLINE" BUTTON AT THE END OF THIS AGREEMENT. \n\n1.  LICENSE TO USE.  Sun grants you a non-exclusive and non-transferable license for the internal use only of the accompanying software and documentation and any error corrections provided by Sun (collectively "Software"), by the number of users and the class of computer hardware for which the corresponding fee has been paid.\n\n2.  RESTRICTIONS  Software is confidential and copyrighted. Title to Software and all associated intellectual property rights is retained by Sun and/or its licensors.  Except as specifically authorized in any Supplemental License Terms, you may not make copies of Software, other than a single copy of  Software for archival purposes.  Unless enforcement is prohibited by applicable law, you may not modify, decompile, or reverse engineer Software. You acknowledge that Software is not designed, licensed or intended for use in the design, construction, operation or maintenance of any nuclear facility.  Sun disclaims any express or implied warranty of fitness for such uses.  No right, title or interest in or to any trademark, service mark, logo or trade name of Sun or its licensors is granted under this Agreement.\n\n3. LIMITED WARRANTY.  Sun warrants to you that for a period of ninety (90) days from the date of purchase, as evidenced by a copy of the receipt, the media on which Software is furnished (if any) will be free of defects in materials and workmanship under normal use. Except for the foregoing, Software is provided "AS IS".  Your exclusive remedy and Sun's entire liability under this limited warranty will be at Sun's option to replace Software media or refund the fee paid for Software.\n\n4.  DISCLAIMER OF WARRANTY.  UNLESS SPECIFIED IN THIS AGREEMENT, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT THESE DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.\n\n5.  LIMITATION OF LIABILITY.  TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  In no event will Sun's liability to you, whether in contract, tort (including negligence), or otherwise, exceed the amount paid by you for Software under this Agreement.  The foregoing limitations will apply even if the above stated warranty fails of its essential purpose.\n\n6.  Termination.  This Agreement is effective until terminated.  You may terminate this Agreement at any time by destroying all copies of Software.  This Agreement will terminate immediately without notice from Sun if you fail to comply with any provision of this Agreement.  Upon Termination, you must destroy all copies of Software.\n\n7.  Export Regulations.  All Software and technical data delivered under this Agreement are subject to US export control laws and may be subject to export or import regulations in other countries. You agree to comply strictly with all such laws and regulations and acknowledge that you have the responsibility to obtain such licenses to export, re-export, or import as may be required after delivery to you.\n\n8.  U.S. Government Restricted Rights.  If Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in Software and accompanying documentation will be only as set forth in this Agreement; this is in accordance with 48 CFR 227.7201 through 227.7202-4 (for Department of Defense (DOD) acquisitions) and with 48 CFR 2.101 and 12.212 (for non-DOD acquisitions).\n\n9.  Governing Law.  Any action related to this Agreement will be governed by California law and controlling U.S. federal law.  No choice of law rules of any jurisdiction will apply.\n\n10.  Severability. If any provision of this Agreement is held to be unenforceable, this Agreement will remain in effect with the provision omitted, unless omission would frustrate the intent of the parties, in which case this Agreement will immediately terminate.\n\n11.  Integration.  This Agreement is the entire agreement between you and Sun relating to its subject matter.  It supersedes all prior or contemporaneous oral or written communications, proposals, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement.  No modification of this Agreement will be binding, unless in writing and signed by an authorized representative of each party.\n\nFor inquiries please contact: Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054\n\n\nSun Microsystems, Inc.\nSupplemental Terms for\nSun ONE Messaging Server 6.0\n\nThese terms for Sun ONE Messaging Server 6.0 supplement the terms of the Binary Code License Agreement ("BCL").  Capitalized terms not defined herein shall have the meanings ascribed to them in the BCL.  These terms shall supersede any inconsistent or conflicting terms in the BCL.\n\n1. Definitions.\n\na. "Service Provider Services" means providing e-mail and e-mail administration services with Software to Service Provider Users.\n\nb. " Corporate Services" means providing e-mail services with Software configured for internal business use only.\n\nc. "User(s)" means collectively Service Provider Users and Corporate Users:\n\n(i) "Service Provider User(s)" means any combination of individual or corporate users, authorized to access service provider services provided to that individual, corporation or legal entity, by you and not for resale or redistribution in any manner.\n\n(ii) "Corporate User(s)" means any individual, within a corporation or other legal entity, authorized to access e-mail services configured for business or commercial use only, and not for resale or redistribution in any manner\n\nd. " Mail Routing Services" means any use of Software in a manner where Software's primary purpose is as a relay agent (e.g. receiving and sending email but not delivering it).\n\ne. "Designated CPU(s)" means the single central processing unit ("CPU") upon which Software is to be loaded by you in order to provide Mail Routing Services. \n\n2. License to Use.  Sun grants you a non-exclusive and non-transferable license for the internal use only of the Software, by the number of Users and/or Designated CPUs for which the corresponding fee has been paid as follows:\n\na. For Service Provider Services.\n\n(i) You may use the Software to provide Service Provider Services to the number of Service Provider Users for which you have paid the corresponding fee.  This Agreement does not allow use of the Software for Mail Routing Services, unless you have paid the corresponding fee for such usage.\n\n(ii) You may enable and use the Delegated Management feature contained in the Software for the number of Users for which you have paid the corresponding fee for such usage. \n\nA. For Corporate Services.  You may use the Software to provide Corporate Services to the number of Corporate Users for which you have paid the corresponding fee.  This Agreement does not allow use of the Software for Mail Routing Services, unless you have paid the corresponding fee for such usage.\n\nB. For Mail Routing Services.  You may use the Software to provide Mail Routing Services only on the number of Designated CPU(s) for which you have paid the corresponding fee for such usage. \n\n3. Directory Server Restrictions.  You may use the Directory Services ("DS") software components of the Software, only for embedded Directory Server services and not to provide Directory Server services for other software products or to provide stand-alone Directory Server services without first obtaining a separate DS license from Sun.\n\n4. Web Server Restrictions.  You may use the Web Server Services ("WS") software components of the Software, only for embedded Web Server services and not to provide Web Server services for other software products or to provide stand-alone Web Server services without first obtaining a separate WS license from Sun. \n\n5. Identity Server Restrictions.  You may use the Identity Server Services ("IS") software components of the Software, only for embedded Identity Server services and not to provide Identity Server services for other software products or to provide stand-alone Identity Server services without first obtaining a separate IS license from Sun.\n\n6. Delegated Administration Server Restrictions.  You may use the Delegated Administration Services ("DA") software components of the Software, only for embedded Delegated Administration services and not to provide Delegated Administration services for other software products or to provide stand-alone Delegated Administration services without first obtaining a separate DA license from Sun.\n\n7. Additional Restrictions.  You may not publish or provide the results of any benchmark or comparison tests run on Software to any third party without the prior written consent of Sun.\n\n8. Third Party Code.  Additional copyright notices and license terms applicable to portions of the Software are set forth in the THIRDPARTYLICENSEREADME file. In addition to any terms and conditions of any third party opensource/freeware license identified in the THIRDPARTYLICENSEREADME file, the disclaimer of warranty and limitation of liability provisions in paragraphs 5 and 6 of the Binary Code License Agreement shall apply to all Software in this distribution\n\n(LFI#133413)\n

#
# Resources for com.iplanet.install.panels.common.RadioLicensePanel
#

radioLicensePanel-Gui-IntroText = Do you agree with the terms of this license?

radioLicensePanel-Gui-HeaderText = Software License Agreement

radioLicensePanel-Gui-noButton = No

radioLicensePanel-Gui-yesButton = Yes

radioLicensePanel-install-Gui-OnlineHelp = Before you configure this product, you must read and accept the entire Software License Agreement under which this product is licensed for your use. <p>If you have read and accept all the terms of the entire Software License Agreement, click 'Yes' and continue with the configuration. <p>If you do not accept all the terms of the Software License Agreement, click 'No' to end the configuration program without configuring the product.

radioLicensePanel-ConsoleInteraction = <p>To configure this software, you must read and accept the entire following Software Licence Agreement. After reading the agreement, you will then be given the opportunity to accept or refuse the licensing terms. Failing to accept the terms of the Software License Agreement will cause the configuration program to end without configuring the product. <p> <Press ENTER to display the Software License Agreement>

radioLicensePanel-ConsoleInteraction2 = <p>If you have read and accept all the terms of the entire Software License Agreement, answer 'yes', and the configuration program will continue."+ <p>If you do not accept all the terms of the Software License Agreement, answer 'no', and the configuration program will end without configuring the product."+ <p>Have you read, and do you accept, all of the terms of the preceding Software License Agreement?

radioLicensePanel-ConsoleInteraction2-noAnswer = no

radioLicensePanel-ConsoleInteraction2-noAnswer1 = n

radioLicensePanel-ConsoleInteraction2-yesAnswer = yes

radioLicensePanel-ConsoleInteraction2-yesAnswer1 = y

radioLicensePanel-Gui-LicenseText = ENTER LICENSE INFORMATION FOR: {0} Version {1}

radioLicensePanel-ConsoleInteraction-LicenseText = ENTER LICENSE INFORMATION FOR: {0} Version {1}


#
# Resources for com.iplanet.install.panels.common.InstallTypePanel
#

installTypePanel-What-To-Do = What would you like to do?

installTypePanel-install-Gui-OnlineHelp = Select the type of product installation to perform from the following choices. This will determine how much information you need to provide for product configuration.\n

installTypePanel-install-1-Name = Client
installTypePanel-install-2-Name = DA-GUI
installTypePanel-install-3-Name = Server
installTypePanel-install-12-Name = Client DA-GUI
installTypePanel-install-13-Name = Client Server
installTypePanel-install-23-Name = DA-GUI Server
installTypePanel-install-123-Name = All

# new way starting with 5.5.1-Beta2
#installTypePanel-install-Type1-Name = Typical
installTypePanel-install-Typical-Name = Typical

# new way starting with 5.5.1-Beta2
#installTypePanel-install-Type1-Desc = The Typical install currently does not work. Use the Custom install instead.
installTypePanel-install-Typical-Desc = The Typical install currently does not work. Use the Custom install instead.

# new way starting with 5.5.1-Beta2
#installTypePanel-install-Type2-Name = Custom
installTypePanel-install-Custom-Name = Custom

# new way starting with 5.5.1-Beta2
#installTypePanel-install-Type2-Desc = You may choose the options you want to install. Recommended for advanced users. Note: you must have an ldap server up and running, and you must have run comm_dssetup.pl on that ldap server prior to instaling Sun ONE Messaging Server.
installTypePanel-install-Custom-Desc = You may choose the options you want to install. Recommended for advanced users. Note: you must have an ldap server up and running, and you must have run comm_dssetup.pl on that ldap server prior to instaling Sun ONE Messaging Server.
installTypePanel-install-Desc = Select the type of installation to perform from the following choices:

installTypePanel-install-Header = Select Type of Installation

installTypePanel-uninstall-Gui-OnlineHelp = Select the type of product uninstallation to perform from the following choices. This will determine how the product and its components get uninstalled from the system.\n

# new way starting with 5.5.1-Beta2
#installTypePanel-uninstall-Type1-Name = Full
installTypePanel-uninstall-FULL-Name = Full

# new way starting with 5.5.1-Beta2
#installTypePanel-uninstall-Type1-Desc = To remove the product and all its components from your system, select Full Uninstallation.
installTypePanel-uninstall-FULL-Desc = To remove the product and all its components from your system, select Full Uninstallation.

# new way starting with 5.5.1-Beta2
#installTypePanel-uninstall-Type2-Name = Partial
installTypePanel-uninstall-PARTIAL-Name = Partial

# new way starting with 5.5.1-Beta2
#installTypePanel-uninstall-Type2-Desc = To select the components you wish to uninstall, select Partial Uninstallation.
installTypePanel-uninstall-PARTIAL-Desc = To select the components you wish to uninstall, select Partial Uninstallation.

installTypePanel-uninstall-Desc = <bold>Select the type of uninstallation to perform from the following choices:</bold>

installTypePanel-uninstall-Header = Select Type of Uninstallation


#
# Resources for com.iplanet.install.panels.common.ComponentSelectionPanel
#

componentSelectionPanel-install-Gui-OnlineHelp = Select one or more {0} components for installation by: <p>ENTER DESCRIPTIONS ABOUT THE COMPONENTS BEING INSTALLED <p>Components with a check mark will be configured. Click next to a component to turn the check mark on or off.

componentSelectionPanel-uninstall-Gui-OnlineHelp = Select one or more {0} components for uninstallation by: <p>ENTER DESCRIPTIONS ABOUT THE COMPONENTS BEING UNINSTALLED <p>Components with a check mark will be uninstalled. Click next to a component to turn the check mark on or off.

componentSelectionPanel-Gui-HeaderText = Select Components to Configure

componentSelectionPanel-Gui-install-Description = {0} components showing a checked box will be configured. Please change selection accordingly.

componentSelectionPanel-Gui-uninstall-Description = {0} components showing a checked box will be uninstalled. Please change selection accordingly.

componentSelectionPanel-QandA1-Title = Insufficient Disk Space

componentSelectionPanel-QandA1-Message = <b>You do not have sufficient disk space to complete the installation.</b><p>Specify a different directory or change your component selection.

componentSelectionPanel-QandA1-ChangeComponentButton = Change Component Selection
componentSelectionPanel-QandA1-ChooseNewButton = Specify New Directory

componentSelectionPanel-Gui-loadingComponents-Title = Loading Components...

componentSelectionPanel-Gui-loadingComponents-Text = Please wait while components are being loaded...
componentSelectionPanel-Gui-loadingComponents-Text2 = Loading components ...

componentSelectionPanel-install-QandA2-Title = Nothing to Install

componentSelectionPanel-uninstall-QandA2-Title = Nothing to Uninstall

componentSelectionPanel-QandA2-nothingToInstallButton = Ok

componentSelectionPanel-install-QandA2-nothingToInstall = <b>No components have been selected for installation.</b><p>Click Ok and return to Directory Selection to specify a different directory for this installation or exit the uninstallation

componentSelectionPanel-uninstall-QandA2-nothingToInstall = <b>No components have been selected for uninstallation.</b><p>Click Ok and return to Directory Selection to specify a different directory for this installation or exit the uninstallation

componentSelectionPanel-cli-toggle-prompt = To check a particular component, enter its number, or 0 when you are finished:

componentSelectionPanel-cli-disabled = Sorry, \"{0}\" is disabled.  It cannot be selected or deselected.  Press <ENTER> to continue.

componentSelectionPanel-checking-disk-space = Checking Disk Space 

componentSelectionPanel-install-QandA3-Title = Automatically including Delegated Administrator Utility component
componentSelectionPanel-install-QandA3-Message = The Delegated Administrator Utility will be installed along with the Delegated Administrator Server. The client will always be installed along with the server.
componentSelectionPanel-install-QandA3-AcceptButton = Okay

#
# Resources for DataPathSelectionPanel
#

DataPathSelection-Gui-IntroText = Please specify the directory in which the configuration and data files should be installed.

DataPathSelection-Gui-DirectorySelectionLabel = Select the Directory to store the configuration and data files:

DataPathSelection-Gui-HeaderText = Select the Directory to Store Configuration and Data Files

DataPathSelection-Gui-BrowseButton = Browse...

DataPathSelection-ConsoleInteraction = Please specify the directory in which the configuration and data files should be installed. It is recommended that you configure the {0} in the directory suggested by this configurator program.

DataPathSelection-ConsoleInteraction-DirectorySelectionQuestion = Specify the directory in which the configuration and data files should be installed:

DataPathSelection-install-Gui-OnlineHelp = It is recommended that you configure the {0} in the directory suggested by this configurator wizard. <p>Click Browse, to specify the path of the directory that will store the configuration and data files.

DataPathSelection-QandA1-Title = Create New Directory?

DataPathSelection-QandA1-Message = <b>The directory \"{0}\" does not exist.</b> <p>Do you want to create it now or choose another directory?

DataPathSelection-QandA1-CreateDirectoryButton = Create Directory

DataPathSelection-QandA1-ChooseNewButton = Choose New

DataPathSelection-QandA2-Title = Unable to Create the Directory

DataPathSelection-QandA2-Message = <b>Cannot create the new directory \"{0}\"</b><p>. Choose an another directory.

DataPathSelection-QandA2-AcceptButton = OK

DataPathSelection-QandA3-Title = No Write Permissions to the Directory

DataPathSelection-QandA3-Message = <b>You do not have write permissions to this directory \"{0}\"</b>. <p>Choose an another directory.

DataPathSelection-QandA3-AcceptButton = OK

DataPathSelection-QandA4-Title = Warning: Previous Configuration Found

DataPathSelection-QandA4-Message1 = <b>The specified directory contains the following product components:</b>

DataPathSelection-QandA4-Message2 = \nTo avoid overwriting any of these components, choose a different configuration directory or exit this setup program, unconfigure the components and run this setup program again.

DataPathSelection-QandA4-AcceptButton = Continue

DataPathSelection-QandA5-Title = Illegal Choice
DataPathSelection-QandA5-Message = The directory {0} is a file under the file system. <p>Choose another directory.
DataPathSelection-QandA5-AcceptButton = Choose New

DataPathSelection-nonempty-Title = Upgrade Existing Installation
DataPathSelection-nonempty-Message = The directory {0} belongs to an existing configuration.  Please choose a new directory or to upgrade the existing installation.
DataPathSelection-nonempty-ChooseNewButton = Choose New
DataPathSelection-nonempty-AcceptButton = Upgrade

DataPathSelection-samepath-Title = The configuration directory and this directory can not be the same
DataPathSelection-samepath-Message = This directory {0} can not be the same directory as the configuration directory {1}. You should separate the binaries from the configuration and data files. Soft links will be created from the configuration directory to the directory containing the configuration and data files.
DataPathSelection-samepath-ChooseNewButton = Choose New

DataPathSelection-QandA-blank-path-Title=ERROR: Invalid Directory
DataPathSelection-QandA-blank-path-Message=The directory name cannot be left blank. This is a mandatory field. Please enter again.
DataPathSelection-QandA-blank-path-OK=OK

DataPathSelection-QandA21-Title=ERROR: Not a Safe Directory
DataPathSelection-QandA21-Message=The Directory name \"<tt>{0}</tt>\" that you have specified for storing configuration and data files is not a Safe directory. <p>This directory cannot be used to store configuration and data files. <p>Please choose an another directory.
DataPathSelection-QandA21-FirstButton=OK

#
# Resources for com.iplanet.install.panels.common.VerifyPanel
#

verifyPanel-install-Gui-OnlineHelp = The listed components are ready for installation based on your configuration settings. <p>If you satisfied with your selection, click Install Now to begin. <p>To return to your previous panels so you can modify your selections, click the Back button.
      
verifyPanel-install-now = Configure Now
      
verifyPanel-checking_disk_space = Checking disk space...

verifyPanel-not_enough_space = WARNING: {0} partition has insufficient space to  install the items selected.  {1} MB additional space would be needed to install selected items.
      
verifyPanel-install-ready = Ready to Configure

verifyPanel-not_enough_partition_space WARNING: Insufficient disk partition space to install the items selected.

verifyPanel-close = Close
      
verifyPanel-start_over = Start Over
      
verifyPanel-install-exit = Exit Configure Program
      
verifyPanel-what_to_do = What would you like to do?
      
verifyPanel-install-cannot = Installation cannot start!

verifyPanel-install-items = The following items for the product {0} will be configured: 

verifyPanel-product = Product

verifyPanel-location = Location

verifyPanel-total_string = Total

verifyPanel-install-size = Space Required

verifyPanel-uninstall-size = Space Reclaimed

verifyPanel-uninstall-Gui-OnlineHelp = The listed components are ready for uninstallation based on your configuration settings. <p>If you satisfied with your selection, click Uninstall Now to begin. <p>To return to your previous panels so you can modify your selections, click the Back button.

verifyPanel-uninstall-now = Unconfigure Now
      
verifyPanel-uninstall-ready = Ready to Unconfigure
      
verifyPanel-uninstall-exit = Exit Unconfigure Program

verifyPanel-uninstall-cannot = Uninstallation cannot start!

verifyPanel-uninstall-items = The following items for the product {0} will be unconfigured:


# 
# Resources for com.iplanet.install.panels.common.ProgressPanel
#

progressPanel-install-Progress-Header = Installing... 

progressPanel-uninstall-Progress-Header = Uninstalling... 

progressPanel-install-Gui-OnlineHelp = This panel indicates the progress of the installation with the aid of the progress bar. To pause or abort installation, press the Stop button. 

progressPanel-uninstall-Gui-OnlineHelp = This panel indicates the progress of the uninstallation with the aid of the progress bar. To pause or abort uninstallation, press the Stop button. 

#
# Resources for com.iplanet.install.panels.common.SummaryPanel
#


summaryPanel-uninstall-Summary = Uninstallation Summary

summaryPanel-install-Summary = Installation Summary

summaryPanel-install-Summary-Below = The {0} installation status is shown below:

summaryPanel-uninstall-Summary-Below = The {0} uninstallation status is shown below:

summaryPanel-Product = Product

summaryPanel-Status = Status

summaryPanel-Information = Information

summaryPanel-More-Information = More Information 

summaryPanel-See-Log-File = Click on the \"Details...\" Button beside product status for more information.

summaryPanel-Click-Exit = Click on the \"Close\" Button to quit.

summaryPanel-Log-File-Location-Notice = Log File: {0}

summaryPanel-Installed = Installed

summaryPanel-Partially-Installed = Partially Installed

summaryPanel-Full = Full

summaryPanel-Partial = Partial

summaryPanel-Failed = Failed

summaryPanel-Stopped = Stopped By User 

summaryPanel-Not-Installed = Not Configured

summaryPanel-Attempted-To-Remove-Stopped = The configuration program has attempted to remove the product whose configuration has Failed or has been Stopped by User.

summaryPanel-Attempted-To-Remove-Failed = The installation has attempted to remove the product whose installation has Failed.

summaryPanel-Details = Details...

summaryPanel-install-Gui-OnlineHelp = The status of the configuration program is listed. Click on the Details button to view the log. 

summaryPanel-uninstall-Gui-OnlineHelp = The status of the unconfiguration is listed. Click on the Details button to view the log. 

summaryPanel-uninstall-cli-summary-desc = Unconfiguration Details:

summaryPanel-install-cli-summary-desc = Configuration Details:

summaryPanel-cli-summary-prompt = Enter the number corresponding to the desired selection for more information, or enter {0} to continue:

summaryPanel-cli-summary-name = Product 

summaryPanel-cli-summary-result = Result

summaryPanel-cli-summary-more = More Information

summaryPanel-cli-summary-notavailable = Not Available

summaryPanel-cli-summary-available = Available 

summaryPanel-cli-summary-done = {0}. Done

summaryPanel-cli-summary-error = No More Information Available

summaryPanel-cli-summary-enter = <Press Return to continue viewing this log file or 'q' to finish viewing> 


#
# Uninstall strings
#

Uninstalling...-Gui-OnlineHelp = The listed components are being uninstalled. Please wait for the process to complete and then check the log for details of the uninstallation.

UninstallType-Gui-OnlineHelp = Choose the type of product uninstallation that you want to perform. Your choice will determine how much information you need to provide for product configuration

#
# Resources for panelName=iMSUserGroup a CSUserPanel
#   They all get their prefix from the panelName attribute in the xml file for
#   say the postInstall element
#

iMSUserGroup-Gui-HeaderText = Sun ONE Messaging Server User and Group

iMSUserGroup-Gui-OnlineHelp = This will the user that will be used to administer the Sun ONE Messaging Server. The group is the group to which the user belongs to. It is recommended that you do not use the "root" user or a group that has superuser privileges.

# main panel
iMSUserGroup-Gui-HeaderText = Sun ONE Messaging Server User and Group

iMSUserGroup-Gui-IntroText = Please enter the user and group which will be used to adminster the Sun ONE Messaging Server. The user and group will be created if they do not exist. If the user is created, it will have a password that is locked out. TBD: This is supposed to be for Unix systems only. NT systems will use Administrator.

iMSUserGroup-Gui-TitleText = Enter Sun ONE Messaging Server User and Group:

iMSUserGroup-Gui-UserIdLabel = Enter Unix username:

iMSUserGroup-Gui-GroupIdLabel = Enter Unix group:

# screen that pops up when no groupid is specified
iMSUserGroup-QandA1-Title = Please specify a group name

iMSUserGroup-QandA1-Message = You must enter a group name.
iMSUserGroup-QandA1-OkButton = OK

# screen that pops up when group does not exist.
iMSUserGroup-QandA2-Title = Group does not exist
iMSUserGroup-QandA2-Message = Group does not exist. Do you want to create it?
iMSUserGroup-QandA2-CreateGroupIdButton = Create Group
iMSUserGroup-QandA2-ChooseNewButton = Choose Different Group

# screen that pops up when we cound not create the group
iMSUserGroup-QandA3-Title = Failed to create group
iMSUserGroup-QandA3-Message = Failed to creae group.
iMSUserGroup--QandA3-ChooseNewButton = Choose Different Group.

# screen that pops up when the group is the "root" group
iMSUserGroup-QandA4-Title = Group is in the root group

iMSUserGroup-QandA4-Message = Warning: Group is in the root group. It is recommended that you choose a group that does not have superuser privileges.

iMSUserGroup--QandA4-AcceptButton = Accept Anyway.
iMSUserGroup--QandA4-ChooseNewButton = Choose Different Group.

# screen that pops up when no username was specified
iMSUserGroup-QandA5-Title = Please specify a username
iMSUserGroup-QandA5-Message = You must enter a username.
iMSUserGroup--QandA5-OkButton = OK

# screen that pops up when no such user exists
iMSUserGroup-QandA6-Title = Create username
iMSUserGroup-QandA6-Message = Username does not exist, Create it?
iMSUserGroup-QandA6-CreateUserIdButton = Create
iMSUserGroup-QandA6-ChooseNewButton = Choose New Username

# screen that pops up when creating of user failed
iMSUserGroup-QandA7-Title = Failed to create user
iMSUserGroup-QandA7-Message = Failed to creae user.
iMSUserGroup--QandA7-ChooseNewButton = Choose Different Username.

# screen that pops up when the root user is used
iMSUserGroup-QandA8-Title = User is root.
iMSUserGroup-QandA8-Message = User has root privileges. It is recommended that the user chosen should not have root privileges.
iMSUserGroup-QandA8-AcceptButton = Accept Anyway.
iMSUserGroup-QandA8-ChooseNewButton = Choose Different User.

# screen that pops up when we fail to make the groupid the main group
# for the user
iMSUserGroup-QandA9-Title = Setting group for user.
iMSUserGroup-QandA9-Message = Attempt to make the main group for the user failed. Please make sure that the user is in the group.
iMSUserGroup-QandA9-AcceptButton = Accept Anyway.
iMSUserGroup-QandA9-ChooseNewButton = Choose Different User/Group.

# for command line TBD - QQQ
iMSUserGroup-ConsoleInteraction = Please enter the user and group which will be used to adminster the Sun ONE Messaging Server. The user and group will be created if they do not exist. If the user is created, it will have a password that is locked out. TBD: This is supposed to be for Unix systems only. NT systems will use Administrator.

iMSUserGroup-ConsoleInteraction-UserIdQuestion = Enter Unix Username:
iMSUserGroup-ConsoleInteraction-GroupIdQuestion = Enter Unix Group:

# QQQ wbUserPanel
iMSUserGroup-install-Gui-OnlineHelp = Enter a user, group.
iMSUserGroup-ProgressMsg-VerifyingGroup = Verifying Group...
iMSUserGroup-ProgressMsg-VerifyingUser = Verifying User...
iMSUserGroup-ConsoleInteraction-UserId = Enter Username:
iMSUserGroup-ProgressMsg-CreatingUser = Creating User...

#
# resources for LoadDefaults panel - a  LoadWizardStateDefaults class
#
LoadDefaults-StartLogfile = Starting logfile at {0} ({1})

LoadDefaults-Gui-TextLabel = Loading Default Properties...
LoadDefaults-Finished = Finished Loading Default Properties...

LoadDefaults-noFQDN-Title = ERROR: Hostname is not a fully qualified domain name
LoadDefaults-noFQDN-Message = Hostname {0} for this machine is not a fully qualified domain name. Please correct this before attempting to configure Messaging Server. Please make sure that your DNS is working properly.
LoadDefaults-noFQDN-ExitButton = Exit

LoadDefaults-noHOST-Title = ERROR: No Hostname found for this machine.
LoadDefaults-noHOST-Message = Could not get a hostname for the system. Please correct this before attempting to configure Messaging Server.
LoadDefaults-noHost-ExitButton = Exit
#
#
#
filePermissions-Gui-HeaderText = filePermissions TBD
NTreg-Gui-HeaderText = NTreg TBD
imtaConfig-Gui-HeaderText = imtaConfig TBD
adminStart-Gui-HeaderText = adminStart TBD
templateReplace-Gui-HeaderText = templateReplace TBD
consoleStart-Gui-HeaderText = consoleStart TBD

LoadDefaults-install-Gui-OnlineHelp= LoadDefaults Help TBD
iMSUserGroupGui-OnlineHelp = iMSUserGroupGui Help TBD
hostDomainPanel-install-Gui-OnlineHelp = hostDomain Help TBD
PostmasterPanel-install-Gui-OnlineHelp = Postmaster Help TBD
imsPassword-install-Gui-OnlineHelp = imsPassword Help TBD
TranslateDefaults-install-Gui-OnlineHelp = TranslateDefaults Help TBD
filePermissions-install-Gui-OnlineHelp = filePermissions Help TBD
ldapChanges-install-Gui-OnlineHelp = ldapChanges Help TBD
NTreg-install-Gui-OnlineHelp = NT registry Help TBD
imtaConfig-install-Gui-OnlineHelp = imtaConfig Help TBD
adminStart-install-Gui-OnlineHelp = admin server start Help TBD
templateReplace-install-Gui-OnlineHelp = templateReplace Help TBD
consoleStart-install-Gui-OnlineHelp = Start Console Help TBD

#
#
#
adminPort-install-Gui-OnlineHelp = adminPort-install-Gui-OnlineHelp
adminPort-ConsoleInteraction = adminPort-ConsoleInteraction
adminPort-ConsoleInteraction2 = adminPort-ConsoleInteraction2
portCheck-install-Gui-OnlineHelp = portCheck-install-Gui-OnlineHelp
portCheck-ConsoleInteraction = portCheck-ConsoleInteraction
portCheck-ConsoleInteraction2 = portCheck-ConsoleInteraction2

#
# lastPanel - a LastPanel
# this is not visible to the user
#
lastPanel-install-Gui-OnlineHelp = No help available

#
WriteIscliCfgProps-install-Gui-OnlineHelp = TBD

# screen that pops up when it fails to write Devsetup.properties 
#   or mid_dctree.ldif
WriteIscliCfgProps-QandA-Title = I/O Error 
WriteIsclicCfgProps-QandA-Message = I/O error while trying to write {0}.\n{1}
WriteIscliCfgProps-QandA-OkButton = Exit

#
IscliCfgPanel-install-Gui-OnlineHelp = TBD

# header text when sequence is started
IscliCfgPanel-Gui-HeaderText-Started = Starting Task Sequence
# message when sequence is started
IscliCfgPanel-Started = Starting Task Sequence

# header text when sequence completes
IscliCfgPanel-Gui-HeaderText-Completed = Sequence Completed
# message when sequence has completed
IscliCfgPanel-Completed = Sequence Completed\n

# message for each task, one for failure, and one for success
# 3args: task name, status, and logfile
IscliCfgPanel-FAILED = FAILED: {0} : status = {1}\n
IscliCfgPanel-PASSED = PASSED: {0} : status = {1}\n
# message at the very end of the panel
# 1 arg: logfile
IscliCfgPanel-PASSED-FINISHED = \nAll Tasks Passed. Please check install log {0} for further details. \n\nHit NEXT to continue
IscliCfgPanel-FAILED-FINISHED = \nFAILURE: Number of task failed:{1}. Please check install log \n     {0}\nfor further details. \n\n Hit NEXT to continue
# Tell user to restart web server
IscliCfgPanel-restartES-Title = Web Server Restart Required
IscliCfgPanel-restartES-Message = The web server configuration was modified. For the changes to take effect, you must restart the Web Server.
IscliCfgPanel-restartES-OK = OK

# app server requires post configuration
IscliCfgPanel-otherContainer-Title = Manual post-configuration required
IscliCfgPanel-otherContainer-Message = After running this program, you need to deploy the commcli-server.war file\ninto the web container used by Identity Server and modify the web container\nclasspath to include the WEB-INF/classes directory extracted from the commcli war file.\nPlease consult the documentation for further details.
IscliCfgPanel-othercontainer-OkButton = OK

# app server requires post configuration
IscliCfgPanel-restartAS-Title = App Server Restart Required
IscliCfgPanel-restartAS-Message = The app server configuration was modified. For the changes to take effect, you must restart the App Server. 
IscliCfgPanel-restartAS-OkButton = OK

# unable to create AMConfig.properties backup copy
IscliCfgPanel-AMConfigBackup-Title = Unable to create backup copy of AMConfig.properties
IscliCfgPanel-AMConfigBackup-Message = Fatal Error, unable to create backup coyp of AMConfig.properties ({0}).
IscliCfgPanel-AMConfigBackup-ExitButton = Exit

# unable to do substitutions in AMConfig.properties
IscliCfgPanel-modAMConfig-Title = Unable to modify AMConfig.properties
IscliCfgPanel-modAMConfig-Message = Fatal Error, unable to modify AMConfig.properties ({0}).
IscliCfgPanel-modAMConfig-ExitButton = Exit

# default domain requires post configuration
IscliCfgPanel-defdomain-Title = Default Domain Post Configuration Task
IscliCfgPanel-defdomain-Message = To enable mail and calendar service on the default domain,<p>please use commadmin domain modify -S mail -S cal -H mailhost<p>after restarting the web container.  Please consult documentation for details.
IscliCfgPanel-defdomain-OK = OK

#
DirPanel-Gui-IntroText = Welcome to the Directory (LDAP) Server panel<p>The url should  be in the format of\nldap://<hostname>:<port>. e.g. ldap://ldapserver.mycompany.com:390.<p>Also note that you should point the URL at the master Directory Server and not the replica, as you normally would not be able to write to the replica.
DirPanel-Gui-HeaderText = Directory (LDAP) Server Panel
DirPanel-Gui-urlLable = LdapURL:
DirPanel-Gui-bindLable = Bind As:
DirPanel-Gui-passwordLable = Password:
DirPanel-Gui-confirmPasswdLable = Confirm Password:
DirPanel-Gui-noURL-warning = Please specify the directory server url.
DirPanel-Gui-invalidLdapURL-warning = Invalid directory server url.
DirPanel-Gui-noDN-warning = You must enter a bind DN. Please try again.
DirPanel-password-warning = You must enter a password. Please try again.
gDirPanel-ldap-connection-warning = Could not connect to LDAP server.
DirPanel-ldap-credentials-warning = Could not connect to LDAP server. Error code {0}. {1}
DirPanel-ldap-baseDN-warning = Could not connect to LDAP server with baseDN {0}. Error code {1}. {2}
DirPanel-QandA-Title = Error
DirPanel-QandA-ChooseNewButton = Choose New
DirPanel-ConsoleInteraction-IntroText = Please specify the Directory (LDAP) server. The Ldap Server URL\nis an url link to the directory server on which the console\ncomponent is configured. The url should  be in the format of\nldap://<hostname>:<port>. e.g. \n\nldap://ldapserver.mycompany.com:390.\n\nThe default bind DN is the distinguished name for the directory manager. Also note that you should point the URL at the master Directory Server and not a replica, as you normally would not be able to write to the replica.
DirPanel-ConsoleInteraction-iDSurl = LdapURL:
DirPanel-ConsoleInteraction-BindingDN = Bind As:
DirPanel-ConsoleInteraction-Password = Password:
DirPanel-ConsoleInteraction-ConfirmPassword = Confirm Password:

DirPanel-install-Gui-OnlineHelp=The Directory (LDAP) Server contains the server configuration for various Sun ONE servers. It is important to provide a the proper credentials (bind DN and password) to write the configuration to the directory server. The Directory Server must be running in order to proceed. Note that the URL must point to the master Directory Server, it should not point to a replica as normally you will not be able to write to the replica.

DirPanel-NOVERSION = NONE DETECTED
DirPanel-NOREVISION = 0
DirPanel-QandA1-Title = Need to run newer version of comm_dssetup.pl.
DirPanel-QandA1-Message = You need to run a newer version of ims_dssetup.pl/comm_dssetup.pl against the configuration directory.\n  The minimum version required is version {2} revision {3}.\n  The last version of ims_dssetup.pl/comm_dssetup.pl run against the configuration directory is version {0} revision {1}.\n
DirPanel-QandA1-OkButton = Exit

# screen that pops up when no U/G suffix was found in dssetup
DirPanel-QandA2-Title = User/Group suffix not found
DirPanel-QandA2-Message = The User/Group suffix that should have been provided by comm_dssetup.pl was not found.\nThis should be under the dn:cn=MsgServer, cn=comms-config of the User/Group Directory under the attribute sunkeyvalue.\nThere should have been a sunkeyvalue of the form ugsuffix=<var>usergroup suffix</var>.\nPerhaps you can try running comm_dssetup.pl again, and be sure to say YES when it asks you whether the directory will be used for user/groups.\n
DirPanel-QandA2-OkButton = Exit

# screen that pops up when no dc tree suffix was found in dssetup info
DirPanel-QandA3-Title = DC Tree suffix not found
DirPanel-QandA3-Message = The DC Tree suffix that should have been provided by comm_dssetup.pl was not found.\nThis should be under the dn:cn=MsgServer, cn=comms-config of the User/Group Directory under the attribute sunkeyvalue.\nThere should have been a sunkeyvalue of the form dcsuffix=<var>Dc Tree suffix</var>.\nPerhaps you can try running comm_dssetup.pl again, and be sure to say YES when it asks you whether the directory will be used for user/groups.\n
DirPanel-QandA3-OkButton = Exit

# screen that pops up when no schematype was found in dssetup info
DirPanel-QandA4-Title = Schematype flag not found
DirPanel-QandA4-Message = The Schematype flag that should have been provided by comm_dssetup.pl was not found.\nThis should be under the dn:cn=MsgServer, cn=comms-config of the User/Group Directory under the attribute sunkeyvalue.\nThere should have been a sunkeyvalue of the form schematype=<var>type of schema</var>.\nPerhaps you can try running comm_dssetup.pl again, and be sure to say YES when it asks you whether the directory will be used for user/groups.\n
DirPanel-QandA4-OkButton = Exit

#
# resources for panelName="EmailDomain" a wbTextFieldPanel
#
# this is <panelName>-Gui-HeaderText. They all get their prefix from
# the panelName attribute in the xml file for say the postInstall
# element

EmailDomain-install-Gui-OnlineHelp = Default Domain online help - TBD

# main panel
EmailDomain-Gui-HeaderText = Default Domain
EmailDomain-Gui-IntroText = Please enter the default domain that will be used if none is specified on the command line.
EmailDomain-Gui-TitleText = Default Domain
EmailDomain-Gui-TextLabel = Enter Domain

# screen that pops up when nothing is keyed in
EmailDomain-QandA-Title = Default Domain is required
EmailDomain-QandA-Message = You must enter a Default Domain
EmailDomain-QandA-Dismiss = OK

# screen that pops up when string is null
EmailDomain-QandA1-Title = No Default Domain Entered
EmailDomain-QandA1-Message = Please enter a Default Domain
EmailDomain-QandA1-OkButton = Retry

# screen that pops up when no . found
EmailDomain-QandA2-Title = No "." found
EmailDomain-QandA2-Message = Default domain must have a "." in it.
EmailDomain-QandA2-OkButton = Retry

# screen that pops up when domain ends with a dot
EmailDomain-QandA3-Title = Domain can not end with a "."
EmailDomain-QandA3-Message = Domain can not end with a "."
EmailDomain-QandA3-OkButton = Retry

# screen that pops up when domain starts with a dot
EmailDomain-QandA4-Title = Domain can not start with "."
EmailDomain-QandA4-Message = Domain can not start with "."
EmailDomain-QandA4-OkButton = Retry

# screen that pops up when domain equals fqdn
EmailDomain-QandA5-Title = Domain can not be the same the FQDN
EmailDomain-QandA5-Message = Domain can not be the same as the Fully Qualified Domain Name of this host.
EmailDomain-QandA5-OkButton = Retry

# for command line
EmailDomain-Console-Intro = Please enter the default domain that will be used if none is specified on the command line.
EmailDomain-Console-Help =
EmailDomain-Console-Prompt = Enter Default Domain

#
# resources for panelName="IsOrgName" a wbTextFieldPanel
#
# this is <panelName>-Gui-HeaderText. They all get their prefix from
# the panelName attribute in the xml file for say the postInstall
# element

IsOrgName-install-Gui-OnlineHelp = Enter the Organization DN in which to create the a top level administrator

# main panel
IsOrgName-Gui-HeaderText = Organization DN for the Default Domain
IsOrgName-Gui-IntroText = The Organization DN will be the LDAP subtree under which all users and groups that belong to the default domain are located. Note that the DN must be located under the user/group suffix.

IsOrgName-Gui-TitleText = Organization DN
IsOrgName-Gui-TextLabel = Enter Org DN

# screen that pops up when nothing is entered
IsOrgName-QandA-Title = An Organization DN is required
IsOrgName-QandA-Message = You must enter an Organization DN
IsOrgName-QandA-Dismiss = OK

# screen that pops up when OrgName is null
IsOrgName-nullOrg-Title = Invalid Organization DN, can not be null
IsOrgName-nullOrg-Message = You must enter an Organization DN
IsOrgName-nullOrg-Dismiss = OK

# screen that pops up when entry is not a DN
IsOrgName-notDN-Title = Invalid Organization Name, not a DN
IsOrgName-notDN-Message = The Organization DN must be an LDAP DN. Please make sure you enter a name that is a valid LDAP DN.
IsOrgName-notDN-Dismiss = OK

# screen that pops up when entry is equal to u/g suffix
# warning only
IsOrgName-sameAsUg-Title = Warning: Same as User/Group Suffix
IsOrgName-sameAsUg-Message = The Organization DN you chose is the User/Group Suffix. Although this is a valid choice, if you ever decide to use hosted domains, there will be difficult migration issues. If you do wish to use hosted domains, then specify a DN one level below the User/Group suffix.
IsOrgName-sameAsUg-Accept = OK
IsOrgName-sameAsUg-ChooseNew = Choose New

# screen that pops up when entry is not equal to u/g suffix or not
#   a descendant of u/g suffix
IsOrgName-notDescendant-Title = Invalid Organization DN, must be descendant of u/g suffix
IsOrgName-notDescendant-Message = The Organization DN \"{0}\" must be a descendant of the User/Group Suffx \"{1}\". Please try again.
IsOrgName-notDescendant-Dismiss = OK

# for command line
IsOrgName-Console-Intro = The Organization DN will be the LDAP subtree under which all email users and groups that belong to the default email domain are located. Note that the DN must be located under the user/group suffix.
IsOrgName-Console-Help = 
IsOrgName-Console-Prompt = Enter Organization DN

#
# wbLdapVerifyService
#   ldap error codes
ldapjavajdkresultcode-0 = Success
ldapjavajdkresultcode-1 = Operation Error
ldapjavajdkresultcode-2 = Protocol Error
ldapjavajdkresultcode-3 = Time Limit Exceeded
ldapjavajdkresultcode-4 = Size Limit Exceeded
ldapjavajdkresultcode-5 = Compare False
ldapjavajdkresultcode-6 = Compare True
ldapjavajdkresultcode-7 = Auth Method Not Supported
ldapjavajdkresultcode-8 = Strong Auth Required
ldapjavajdkresultcode-9 = LDAP Partial Results
ldapjavajdkresultcode-10 = Referral
ldapjavajdkresultcode-11 = Admin Limit Exceeded
ldapjavajdkresultcode-12 = Unavailable Critical Extension
ldapjavajdkresultcode-13 = Confidentiality Required
ldapjavajdkresultcode-14 = SASL Bind in Progress
ldapjavajdkresultcode-16 = No Such Attribute
ldapjavajdkresultcode-17 = Undefined Attribute Type
ldapjavajdkresultcode-18 = Inappropriate Matching
ldapjavajdkresultcode-19 = Constraint Violation
ldapjavajdkresultcode-20 = Attribute or Value Exists
ldapjavajdkresultcode-21 = Invalid Attribute Syntax
ldapjavajdkresultcode-32 = No Such Object
ldapjavajdkresultcode-33 = Alias Problem
ldapjavajdkresultcode-34 = Invalid DN Syntax
ldapjavajdkresultcode-35 = IS LEAF
ldapjavajdkresultcode-36 = Alias Dereferencing Problem
ldapjavajdkresultcode-48 = Inappropriate Authentication
ldapjavajdkresultcode-49 = Invalid Credentials
ldapjavajdkresultcode-50 = Insufficient Access Rights
ldapjavajdkresultcode-51 = Busy
ldapjavajdkresultcode-52 = Unavailable
ldapjavajdkresultcode-53 = Unwilling To Perform
ldapjavajdkresultcode-54 = Loop Detect
ldapjavajdkresultcode-64 =_Naming Violation
ldapjavajdkresultcode-65 = Object Class Violation
ldapjavajdkresultcode-66 = Not Allowed On Nonleaf
ldapjavajdkresultcode-67 =_Not Allowed On RDN
ldapjavajdkresultcode-68 = Entry Already Exists
ldapjavajdkresultcode-69 = Object Class Mods Prohibited
ldapjavajdkresultcode-70 = Results Too Large
ldapjavajdkresultcode-71 = Affects Multiple Dsas
ldapjavajdkresultcode-80 = Other
ldapjavajdkresultcode-81 = Server Down
ldapjavajdkresultcode-82 = Local Error
ldapjavajdkresultcode-83 = Encoding Error
ldapjavajdkresultcode-84 = Decoding Error
ldapjavajdkresultcode-85 = Timeout
ldapjavajdkresultcode-86 = Auth Unknown
ldapjavajdkresultcode-87 = Filter Error
ldapjavajdkresultcode-88 = User Cancelled
ldapjavajdkresultcode-89 = Param Error
ldapjavajdkresultcode-90 = No Memory
ldapjavajdkresultcode-91 = Connect Error
ldapjavajdkresultcode-92 = Not Supported
ldapjavajdkresultcode-93 = Control Not Found
ldapjavajdkresultcode-94 = No Results Returned
ldapjavajdkresultcode-95 = More Results To Return
ldapjavajdkresultcode-96 = Client Loop
ldapjavajdkresultcode-97 = Referral Limit Exceeded

#
# Component Display Names
#
iscli-client-install-DisplayName = Delegated Administrator Utility
da-gui-install-DisplayName = Delegated Administrator Console
iscli-server-install-DisplayName = Delegated Administrator Server

#
# Access Manager Host and Port
# wbHostPortPanel
#
ISHostPort-Gui-HeaderText = Access Manager Host and Port
ISHostPort-Config-Ds-Intro = Please enter the Access Manager Host name and Port number
ISHostPort-Config-Ds-Host-Label = Hostname:
ISHostPort-Config-Ds-Port-Label = Port:
ISHostPort-Config-Ds-Host-Cli = Hostname:
ISHostPort-Config-Ds-Port-Cli = Port:
ISHostPort-install-Gui-OnlineHelp = Enter the hostname and port for Access Manager.

#
# wbInfoPanel
#
ISServerRootPanel-GUI-Header-Text = IS Admin User
ISServerRootPanel-install-Gui-OnlineHelp = TBD ISServerRootPanel-install-Gui-OnlineHelp
ISServerRootPanel-ConsoleInteraction = This panel will ask for the IS Server Root Location. This is just a placeholder for now since the panel is not written yet. Hit return to continue.

#
# wbInfoPanel
#
ISAdminUserPanel-GUI-Header-Text = IS Admin User
ISAdminUserPanel-install-Gui-OnlineHelp = TBD ISAdminUserPanel-install-Gui-OnlineHelp
ISAdminUserPanel-ConsoleInteraction = This panel will ask for the IS Admin User and password. This is just a placeholder for now since the panel is not written yet. Hit return to continue.

#
# IS Default SSL Port
#
# resources for panelName="DefSSLPort" a wbTextFieldPanel
#
# this is <panelName>-Gui-HeaderText. They all get their prefix from
# the panelName attribute in the xml file for say the postInstall
# element

DefSSLPort-install-Gui-OnlineHelp = The default SSL Port to use if none is provided to the Delegated Administrator Utility

# main panel
DefSSLPort-Gui-HeaderText = Default SSL Port
DefSSLPort-Gui-IntroText = Please enter the default SSL Port that the Delegated Administrator Utility will use if none is specified.
DefSSLPort-Gui-TitleText = Default SSL Port
DefSSLPort-Gui-TextLabel = Default SSL Port:

# screen that pops up when nothing is keyed in
DefSSLPort-QandA-Title = A default SSL Port is required
DefSSLPort-QandA-Message = You must enter a Default SSL Port
DefSSLPort-QandA-Dismiss = OK

# for command line
DefSSLPort-Console-Intro = Please enter the default SSL Port that the Delegated Administrator Utility will use if none is specified.
DefSSLPort-Console-Help = The default SSL Port if none is specified to the Delegated Administrator Utility
DefSSLPort-Console-Prompt = Enter Default SSL Port

#
# Domain separator for DA-GUI
#
# resources for panelName="DomainSeparator" a wbTextFieldPanel
#
# this is <panelName>-Gui-HeaderText. They all get their prefix from
# the panelName attribute in the xml file for say the postInstall
# element

DomainSeparator-install-Gui-OnlineHelp = The domain separator for user login authentication

# main panel
DomainSeparator-Gui-HeaderText = Default Domain Separator
DomainSeparator-Gui-IntroText = Please enter the domain separator for user logon authentication
DomainSeparator-Gui-TitleText = Domain Separator
DomainSeparator-Gui-TextLabel = Separator:

# screen that pops up when nothing is keyed in
DomainSeparator-QandA-Title = A domain separator must be specified
DomainSeparator-QandA-Message = You must enter a domain separator
DomainSeparator-QandA-Dismiss = OK

# for command line
DomainSeparator-Console-Intro = Please enter the domain separator for user logon authentication
DomainSeparator-Console-Help = The domain separator for user logon authentication
DomainSeparator-Console-Prompt = Enter domain separator

#
# CheckboxPanel
# to ask the type of web container
# 3 choices: web server, app server 7, app server 8
#
webContainer-Gui-HeaderText = Select a Web Container
webContainer-Gui-IntroText = You can deploy Delegated Administrator Console on Web Server or Application Server.
webContainer-Gui-TitleText = Web Container
webContainer-Gui-cb1 = Web Server
webContainer-Gui-cb2 = App Server 7.x
webContainer-Gui-cb3 = App Server 8.x
webContainer-install-Gui-OnlineHelp = Choose the Web Container in which Delegated Administrator Console should be deployed.

webContainer-ConsoleInteraction-IntroText = You can deploy Delegated Administrator Console on Web Server or Application Server
webContainer-ConsoleInteraction-cbQuestion = Type WEB, APP7 or APP8 to specify your web container (WEB, APP7 or APP8) ?
webContainer-ConsoleInteraction-cb1Answer = WEB
webContainer-ConsoleInteraction-cb1Answer1 = web
webContainer-ConsoleInteraction-cb2Answer = APP7
webContainer-ConsoleInteraction-cb2Answer1 = app7
webContainer-ConsoleInteraction-cb3Answer = APP8
webContainer-ConsoleInteraction-cb3Answer1 = app8

# WebSrvPrefPanel - Web Server Instance preferences
#

WebSrvPrefPanel-Gui-HeaderText=Web Server Configuration Details

WebSrvPrefPanel-Gui-IntroText=Specify the local Web Server instance details used by the configurator to configure Delegated Administrator Console on Web Server.

WebSrvPrefPanel-install-Gui-OnlineHelp=Enter the following web server instance details to configure Delegated Administrator Console: <ul><li><b>Server Root Directory Name</b>: Specify the local directory in which Web Server is installed. <li><b>Server Instance Identifier</b>: Enter the Web Server Identifier for which Delegated Administrator Console is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which Delegated Administrator Console is to be configured. <li><b>HTTP Port Number</b>: Enter the Web Server port number where HTTP service is available. </ul>

WebSrvPrefPanel-ConsoleInteraction=Web Server Configuration Details <p>Specify the local Web Server instance details used by the configurator to configure Delegated Administrator Console on Web Server. Enter the following web server instance details to configure Delegated Administrator Console: <p><b>Server Root Directory Name</b>: Enter the local directory in which Web Server is installed. <p><b>Server Instance Identifier</b>: Enter the Web Server Identifier for which Delegated Administrator Console is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which Delegated Administrator Console is to be configured. <p><b>HTTP Port Number</b>: Enter the Web Server port number where HTTP service is available.

WebSrvPrefPanel-Gui-TitleText=Enter Web Server Configuration Details

WebSrvPrefPanel-Gui-installBrowseButton=Browse..

WebSrvPrefPanel-Gui-websrvInstallDirLabel=Server Root Directory
WebSrvPrefPanel-Gui-webSrvInstanceIdLabel=Server Instance Identifier
WebSrvPrefPanel-Gui-webSrvVirtualSrvIdLabel=Virtual Server Identifier
WebSrvPrefPanel-Gui-webSrvPortNumberLabel=HTTP Port

WebSrvPrefPanel-QandA1-Title=ERROR: Invalid Web Sever Root Directory Name
WebSrvPrefPanel-QandA1-Message=The Web Server Root directory Name cannot be left blank. This is a mandatory field.
WebSrvPrefPanel-QandA1-FirstButton=Choose New

WebSrvPrefPanel-QandA2-Title=ERROR: Invalid Web Sever Root Directory Name
WebSrvPrefPanel-QandA2-Message=The directory path \"<tt>{0}</tt>\" for the Web Server Root does not exist or is not a valid directory path. No such directory found.
WebSrvPrefPanel-QandA2-FirstButton=Choose New

WebSrvPrefPanel-QandA3-Title=ERROR: Invalid Web Sever Root Directory Name
WebSrvPrefPanel-QandA3-Message=The Web Server Root directory value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the wdeploy tool at \"<tt>{1}</tt>\".
WebSrvPrefPanel-QandA3-FirstButton=Choose New

WebSrvPrefPanel-QandA4-Title=ERROR: Invalid Web Server Instance Identifier
WebSrvPrefPanel-QandA4-Message=The Web Server Instance Identifier cannot be left blank. This is a mandatory field.
WebSrvPrefPanel-QandA4-FirstButton=Choose New

WebSrvPrefPanel-QandA5-Title=ERROR: Invalid Web Server Instance Identifier
WebSrvPrefPanel-QandA5-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the Web Server Instance Directory path \"<tt>{1}</tt>\".
WebSrvPrefPanel-QandA5-FirstButton=Choose New

WebSrvPrefPanel-QandA6-Title=ERROR: Invalid Web Server Instance Identifier
WebSrvPrefPanel-QandA6-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the magnus.conf file at \"<tt>{1}</tt>\".
WebSrvPrefPanel-QandA6-FirstButton=Choose New

WebSrvPrefPanel-QandA7-Title=ERROR: Invalid Web Server Instance Identifier
WebSrvPrefPanel-QandA7-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.xml file at \"<tt>{1}</tt>\".
WebSrvPrefPanel-QandA7-FirstButton=Choose New

WebSrvPrefPanel-QandA8-Title=ERROR: Invalid Virtual Server Identifier
WebSrvPrefPanel-QandA8-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
WebSrvPrefPanel-QandA8-FirstButton=Choose New

WebSrvPrefPanel-QandA9-Title=ERROR: Invalid Web Server Details
WebSrvPrefPanel-QandA9-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
WebSrvPrefPanel-QandA9-FirstButton=Continue
WebSrvPrefPanel-QandA9-SecondButton=Correct


WebSrvPrefPanel-QandA12-Title=ERROR: Invalid Web Server Instance Port Number
WebSrvPrefPanel-QandA12-Message=Enter the Web Server Instance Port Number in the numeric format.
WebSrvPrefPanel-QandA12-FirstButton=Choose New

WebSrvPrefPanel-QandA13-Title=ERROR: Unable to connect to the Web Server host:port
WebSrvPrefPanel-QandA13-Message=Unable to connect to the Web Server Instance \"<tt>{0}:{1}</tt>\".  <p>This may result in an incomplete configuration, if you accept the current Web Server Instance details. <p>Select Accept if you want to continue with the configuration using the current values.
WebSrvPrefPanel-QandA13-FirstButton=Accept
WebSrvPrefPanel-QandA13-SecondButton=Choose New


WebSrvPrefPanel-ConsoleInteraction-websrvInstallDirQuestion=Enter Web Server Root Directory:
WebSrvPrefPanel-ConsoleInteraction-webSrvInstanceIdQuestion=Enter Web Server Instance Identifier:
WebSrvPrefPanel-ConsoleInteraction-webSrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
WebSrvPrefPanel-ConsoleInteraction-webSrvPortNumberQuestion=Enter Web Server HTTP Port:

WebSrvPrefPanel-ProgressMsg-VerifyingWebServerInstanceConnection=Verifying whether the Web Server Instance connection is alive

WebSrvPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrvPrefPanel - Application Server Instance preferences
#
AppSrvPrefPanel-Gui-HeaderText=Application Server Configuration Details

AppSrvPrefPanel-Gui-IntroText=Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Console on Application Server.

AppSrvPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server details used by the configurator to configure Delegated Administrator Console on Application Server. <p>Enter the following application server instance details to configure Delegated Administrator Console: <ul><li><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <li><b>Domain Directory</b>: Enter the Application Server domain directory. <li><b>Document Root Directory</b>: Enter the Application Server document root directory. <li><b>Server Instance Name</b>: Enter the Application Server Instance Name for which the Delegated Administrator Console is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administratro is to be configured. <li><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.</ul>

AppSrvPrefPanel-ConsoleInteraction=Application Server Configuration Details <p>Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Console on Application Server. Enter the following application server instance details to configure Delegated Administrator Console: <p><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <p><b>Domain Directory</b>: Enter the Application Server domain directory. <p><b>Document Root Directory</b>: Enter the Application Server document root directory. <p><b>Server Instance Name</b>: Enter the Application Server Name for which the Delegated Administrator Console is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Console is to be configured. <p><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.

AppSrvPrefPanel-Gui-TitleText=Enter Application Server Configuration Details

AppSrvPrefPanel-Gui-installBrowseButton=Browse..

AppSrvPrefPanel-Gui-appsrvInstallDirLabel=Install Directory
AppSrvPrefPanel-Gui-appsrvDomainDirLabel=Domain Directory
AppSrvPrefPanel-Gui-appsrvDocumentRootDirLabel=Document Root Directory
AppSrvPrefPanel-Gui-appsrvInstanceNameLabel=Server Instance Name
AppSrvPrefPanel-Gui-appsrvVirtualSrvIdLabel=Virtual Server Identifier
AppSrvPrefPanel-Gui-appsrvPortNumberLabel=Server Instance HTTP Port

AppSrvPrefPanel-QandA1-Title=ERROR: Invalid Application Server Install Directory Name
AppSrvPrefPanel-QandA1-Message=The Application Server Install Directory Name cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA1-FirstButton=Choose New

AppSrvPrefPanel-QandA2-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrvPrefPanel-QandA2-Message=The Application Server Domain Directory Name cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA2-FirstButton=Choose New

AppSrvPrefPanel-QandA3-Title=ERROR: Invalid Document Root Directory Name
AppSrvPrefPanel-QandA3-Message=The Application Server Document Root Directory Name cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA3-FirstButton=Choose New

AppSrvPrefPanel-QandA4-Title=ERROR: Invalid Application Server Install Directory Name
AppSrvPrefPanel-QandA4-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Install Directory does not exist or is not a valid directory path. No such directory found.
AppSrvPrefPanel-QandA4-FirstButton=Choose New

AppSrvPrefPanel-QandA5-Title=ERROR: Invalid Application Server Install Directory Name
AppSrvPrefPanel-QandA5-Message=The Application Server Install Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the asadmin tool at \"<tt>{1}</tt>\".
AppSrvPrefPanel-QandA5-FirstButton=Choose New

AppSrvPrefPanel-QandA6-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrvPrefPanel-QandA6-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Domain Directory does not exists or is not a valid directory path. No such directory found.
AppSrvPrefPanel-QandA6-FirstButton=Choose New

AppSrvPrefPanel-QandA7-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrvPrefPanel-QandA7-Message=The Application Server Domain Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the admin-server directory at \"<tt>{1}</tt>\".
AppSrvPrefPanel-QandA7-FirstButton=Choose New

AppSrvPrefPanel-QandA8-Title=ERROR: Invalid Document Root Directory Name
AppSrvPrefPanel-QandA8-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Document Root Directory does not exists or is not a valid directory path. No such directory found.
AppSrvPrefPanel-QandA8-FirstButton=Choose New

AppSrvPrefPanel-QandA9-Title=ERROR: Invalid Server Instance Name
AppSrvPrefPanel-QandA9-Message=The Application Server Instance Name cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA9-FirstButton=Choose New

AppSrvPrefPanel-QandA10-Title=ERROR: Invalid Server Instance Name
AppSrvPrefPanel-QandA10-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the Application Server Instance Directory path \"<tt>{1}</tt>\".
AppSrvPrefPanel-QandA10-FirstButton=Choose New

AppSrvPrefPanel-QandA11-Title=ERROR: Invalid Server Instance Name
AppSrvPrefPanel-QandA11-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.xml file at \"<tt>{1}</tt>\".
AppSrvPrefPanel-QandA11-FirstButton=Choose New

AppSrvPrefPanel-QandA12-Title=ERROR: Invalid Server Instance Name
AppSrvPrefPanel-QandA12-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.policy file at \"<tt>{1}</tt>\".
AppSrvPrefPanel-QandA12-FirstButton=Choose New

AppSrvPrefPanel-QandA13-Title=ERROR: Invalid Virtual Server Identifier
AppSrvPrefPanel-QandA13-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA13-FirstButton=Choose New

AppSrvPrefPanel-QandA14-Title=ERROR: Invalid Application Server Instance Port Number
AppSrvPrefPanel-QandA14-Message=The Application Server Instance Port Number cannot be left blank. This is a mandatory field.
AppSrvPrefPanel-QandA14-FirstButton=Choose New

AppSrvPrefPanel-QandA15-Title=ERROR: Invalid Application Server Instance Port Number
AppSrvPrefPanel-QandA15-Message=Enter the Application Server Instance Port Number in the numeric format
AppSrvPrefPanel-QandA15-FirstButton=Choose New

AppSrvPrefPanel-QandA16-Title=ERROR: Unable to connect to the Application Server host:port
AppSrvPrefPanel-QandA16-Message=Unable to connect to the Application Server Instance \"<tt>{0}:{1}</tt>\". <p>This may result in an incomplete configuration, if you accept the current Application Server Instance details. <p>Select Accept if you want to continue configuration using the current values.
AppSrvPrefPanel-QandA16-FirstButton=Accept
AppSrvPrefPanel-QandA16-SecondButton=Choose New

AppSrvPrefPanel-QandA21-Title=ERROR: Invalid Application Server Details
AppSrvPrefPanel-QandA21-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
AppSrvPrefPanel-QandA21-FirstButton=Continue
AppSrvPrefPanel-QandA21-SecondButton=Correct

AppSrvPrefPanel-ConsoleInteraction-appsrvInstallDirQuestion=Enter Application Server Install Directory:
AppSrvPrefPanel-ConsoleInteraction-appsrvDomainDirQuestion=Enter Application Server Domain Directory:
AppSrvPrefPanel-ConsoleInteraction-appsrvDocumentRootDirQuestion=Enter Application Server Document Root Directory:
AppSrvPrefPanel-ConsoleInteraction-appsrvInstanceNameQuestion=Enter Application Server Instance Name:
AppSrvPrefPanel-ConsoleInteraction-appsrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
AppSrvPrefPanel-ConsoleInteraction-appsrvPortNumberQuestion=Enter Application Server Instance HTTP Port:

AppSrvPrefPanel-ProgressMsg-VerifyingAppServerInstanceConnection=Verifying whether the Application Server Instance connection is alive

AppSrvPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrv8xPrefPanel - Application Server Instance preferences
#
AppSrv8xPrefPanel-Gui-HeaderText=Application Server Configuration Details

AppSrv8xPrefPanel-Gui-IntroText=Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Console on Application Server.

AppSrv8xPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server details used by the configurator to configure Delegated Administrator Console on Application Server. <p>Enter the following application server instance details to configure Delegated Administrator Console: <ul><li><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <li><b>Domain Directory</b>: Enter the Application Server domain directory. <li><b>Document Root Directory</b>: Enter the Application Server document root directory. <li><b>Server Target Name</b>: Enter the Application Server Target Name for which the Delegated Administrator Console is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Console is to be configured. <li><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.</ul>

AppSrv8xPrefPanel-ConsoleInteraction=Application Server Configuration Details <p>Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Console on Application Server. Enter the following application server instance details to configure Delegated Administrator Console: <p><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <p><b>Domain Directory</b>: Enter the Application Server domain directory. <p><b>Document Root Directory</b>: Enter the Application Server document root directory. <p><b>Server Target Name</b>: Enter the Application Server Name for which the Delegated Administrator Console is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Console is to be configured. <p><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.

AppSrv8xPrefPanel-Gui-TitleText=Enter Application Server Configuration Details

AppSrv8xPrefPanel-Gui-installBrowseButton=Browse..

AppSrv8xPrefPanel-Gui-appsrvInstallDirLabel=Install Directory
AppSrv8xPrefPanel-Gui-appsrvDomainDirLabel=Domain Directory
AppSrv8xPrefPanel-Gui-appsrvDocumentRootDirLabel=Document Root Directory
AppSrv8xPrefPanel-Gui-appsrvTargetNameLabel=Server Target Name
AppSrv8xPrefPanel-Gui-appsrvVirtualSrvIdLabel=Virtual Server Identifier
AppSrv8xPrefPanel-Gui-appsrvPortNumberLabel=Server Instance HTTP Port

AppSrv8xPrefPanel-QandA1-Title=ERROR: Invalid Application Server Install Directory Name
AppSrv8xPrefPanel-QandA1-Message=The Application Server Install Directory Name cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA1-FirstButton=Choose New

AppSrv8xPrefPanel-QandA2-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrv8xPrefPanel-QandA2-Message=The Application Server Domain Directory Name cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA2-FirstButton=Choose New

AppSrv8xPrefPanel-QandA3-Title=ERROR: Invalid Document Root Directory Name
AppSrv8xPrefPanel-QandA3-Message=The Application Server Document Root Directory Name cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA3-FirstButton=Choose New

AppSrv8xPrefPanel-QandA4-Title=ERROR: Invalid Application Server Install Directory Name
AppSrv8xPrefPanel-QandA4-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Install Directory does not exist or is not a valid directory path. No such directory found.
AppSrv8xPrefPanel-QandA4-FirstButton=Choose New

AppSrv8xPrefPanel-QandA5-Title=ERROR: Invalid Application Server Install Directory Name
AppSrv8xPrefPanel-QandA5-Message=The Application Server Install Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the asadmin tool at \"<tt>{1}</tt>\".
AppSrv8xPrefPanel-QandA5-FirstButton=Choose New

AppSrv8xPrefPanel-QandA6-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrv8xPrefPanel-QandA6-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Domain Directory does not exists or is not a valid directory path. No such directory found.
AppSrv8xPrefPanel-QandA6-FirstButton=Choose New

AppSrv8xPrefPanel-QandA7-Title=ERROR: Invalid Application Server Domain Directory Name
AppSrv8xPrefPanel-QandA7-Message=The Application Server Domain Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the admin-server directory at \"<tt>{1}</tt>\".
AppSrv8xPrefPanel-QandA7-FirstButton=Choose New

AppSrv8xPrefPanel-QandA8-Title=ERROR: Invalid Document Root Directory Name
AppSrv8xPrefPanel-QandA8-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Document Root Directory does not exists or is not a valid directory path. No such directory found.
AppSrv8xPrefPanel-QandA8-FirstButton=Choose New

AppSrv8xPrefPanel-QandA9-Title=ERROR: Invalid Domain directory
AppSrv8xPrefPanel-QandA9-Message=The Application Server Target Name cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA9-FirstButton=Choose New

AppSrv8xPrefPanel-QandA11-Title=ERROR: Invalid Domain directory
AppSrv8xPrefPanel-QandA11-Message=The Application Server Domain directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the domain.xml file at \"<tt>{1}</tt>\".
AppSrv8xPrefPanel-QandA11-FirstButton=Choose New

AppSrv8xPrefPanel-QandA12-Title=ERROR: Invalid Domain directory
AppSrv8xPrefPanel-QandA12-Message=The Application Server Domain directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.policy file at \"<tt>{1}</tt>\".
AppSrv8xPrefPanel-QandA12-FirstButton=Choose New

AppSrv8xPrefPanel-QandA13-Title=ERROR: Invalid Virtual Server Identifier
AppSrv8xPrefPanel-QandA13-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA13-FirstButton=Choose New

AppSrv8xPrefPanel-QandA14-Title=ERROR: Invalid Application Server Instance Port Number
AppSrv8xPrefPanel-QandA14-Message=The Application Server Instance Port Number cannot be left blank. This is a mandatory field.
AppSrv8xPrefPanel-QandA14-FirstButton=Choose New

AppSrv8xPrefPanel-QandA15-Title=ERROR: Invalid Application Server Instance Port Number
AppSrv8xPrefPanel-QandA15-Message=Enter the Application Server Instance Port Number in the numeric format
AppSrv8xPrefPanel-QandA15-FirstButton=Choose New

AppSrv8xPrefPanel-QandA16-Title=ERROR: Unable to connect to the Application Server host:port
AppSrv8xPrefPanel-QandA16-Message=Unable to connect to the Application Server Instance \"<tt>{0}:{1}</tt>\". <p>This may result in an incomplete configuration, if you accept the current Application Server Instance details. <p>Select Accept if you want to continue configuration using the current values.
AppSrv8xPrefPanel-QandA16-FirstButton=Accept
AppSrv8xPrefPanel-QandA16-SecondButton=Choose New

AppSrv8xPrefPanel-QandA21-Title=ERROR: Invalid Application Server Details
AppSrv8xPrefPanel-QandA21-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
AppSrv8xPrefPanel-QandA21-FirstButton=Continue
AppSrv8xPrefPanel-QandA21-SecondButton=Correct

AppSrv8xPrefPanel-ConsoleInteraction-appsrvInstallDirQuestion=Enter Application Server Install Directory:
AppSrv8xPrefPanel-ConsoleInteraction-appsrvDomainDirQuestion=Enter Application Server Domain Directory:
AppSrv8xPrefPanel-ConsoleInteraction-appsrvDocumentRootDirQuestion=Enter Application Server Document Root Directory:
AppSrv8xPrefPanel-ConsoleInteraction-appsrvTargetNameQuestion=Enter Application Server Instance Name:
AppSrv8xPrefPanel-ConsoleInteraction-appsrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
AppSrv8xPrefPanel-ConsoleInteraction-appsrvPortNumberQuestion=Enter Application Server Instance HTTP Port:

AppSrv8xPrefPanel-ProgressMsg-VerifyingAppServerInstanceConnection=Verifying whether the Application Server Instance connection is alive

AppSrv8xPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrvAdminInstPrefPanel - Application Server: Administration Instance Details
# 
AppSrvAdminInstPrefPanel-Gui-HeaderText=Application Server: Administration Instance Details
AppSrvAdminInstPrefPanel-Gui-IntroText=Specify Application Server's Administration instance details used by the configurator to configure Delegated Administrator Console on Application Server.
AppSrvAdminInstPrefPanel-Gui-TitleText=Enter Administration Instance Details
AppSrvAdminInstPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server's Administration instance details used by the configurator to configure Delegated Administrator Console on Application Server. <p>Enter the following Administration Server Instance details to configure Delegated Administrator Console: <ul> <li><b>Administration Server Port</b>: Enter the Administration Server port number. <li><b>Administrator User ID</b>: Enter the administrator user identifier. <li><b>Administrator Password</b>: Enter the administrator password. <li><b>Secure Administration Server Instance</b>: Specify whether the Application Server's Administration Instance is running in secure mode. </ul>
AppSrvAdminInstPrefPanel-ConsoleInteraction=Application Server: Administration Instance Details <p>Enter the following Administration Server instance details to configure Delegated Administrator Console: <p><b>Administration Server Port</b>: Enter the Administration Server port number. <p><b>Administrator User ID</b>: Enter the administrator user identifier. <p><b>Administrator Password</b>: Enter the administrator password. <p><b>Secure Administration Server Instance</b>: Specify whether the Application Server's Administration Instance is running in secure mode.
AppSrvAdminInstPrefPanel-Gui-AdminPortLabel=Administration Server Port
AppSrvAdminInstPrefPanel-Gui-AdminUserIDLabel=Administrator User ID
AppSrvAdminInstPrefPanel-Gui-AdminPasswordLabel=Administrator Password
AppSrvAdminInstPrefPanel-Gui-IsSecureAdminServerLabel=Secure Administration Server Instance
AppSrvAdminInstPrefPanel-ConsoleInteraction-AdminPortQuestion=Enter the Administration Server Port:
AppSrvAdminInstPrefPanel-ConsoleInteraction-AdminUserIDQuestion=Enter the Administrator User ID:
AppSrvAdminInstPrefPanel-ConsoleInteraction-AdminPasswordQuestion=Enter the Administrator Password: 
AppSrvAdminInstPrefPanel-ConsoleInteraction-IsSecureAdminServerQuestion=Is the Administration Server instance running in the secure mode ?
AppSrvAdminInstPrefPanel-ConsoleInteraction-yesAnswer=yes
AppSrvAdminInstPrefPanel-ConsoleInteraction-noAnswer=no
AppSrvAdminInstPrefPanel-ProgressMsg-VerifyingASAdminServerInstanceConnection=Verifying whether the Administration Server instance connection is alive
AppSrvAdminInstPrefPanel-QandA1-Title=ERROR: Invalid Administration Server Port Number
AppSrvAdminInstPrefPanel-QandA1-Message=The Administration Server Port Number cannot be left blank. This is a mandatory field.
AppSrvAdminInstPrefPanel-QandA1-FirstButton=Choose New
AppSrvAdminInstPrefPanel-QandA2-Title=ERROR: Invalid Administration Server Port Number
AppSrvAdminInstPrefPanel-QandA2-Message=Enter the Administration Server Port Port Number in the numeric format
AppSrvAdminInstPrefPanel-QandA2-FirstButton=Choose New
AppSrvAdminInstPrefPanel-QandA3-Title=ERROR: Unable to connect to the Administration Server host:port
AppSrvAdminInstPrefPanel-QandA3-Message=Unable to connect to the Administration Server instance \"<tt>{0}:{1}</tt>\". <p>It is mandatory to have the Application Server's Administration Service available for configuring Delegated Administrator Console on Application Server. <p>Please try again.
AppSrvAdminInstPrefPanel-QandA3-FirstButton=OK
AppSrvAdminInstPrefPanel-QandA4-Title=ERROR: Invalid Administrator User ID
AppSrvAdminInstPrefPanel-QandA4-Message=The Administrator User ID cannot be left blank. This is a mandatory field.
AppSrvAdminInstPrefPanel-QandA4-FirstButton=OK
AppSrvAdminInstPrefPanel-QandA5-Title=ERROR: Invalid Administrator Password
AppSrvAdminInstPrefPanel-QandA5-Message=The Administrator Password cannot be left blank. This is a mandatory field.
AppSrvAdminInstPrefPanel-QandA5-FirstButton=OK
AppSrvAdminInstPrefPanel-QandA21-Title=Information
AppSrvAdminInstPrefPanel-QandA21-Message=You have specified that the Application Server's Administration Server instance is running in the secure mode.
AppSrvAdminInstPrefPanel-QandA21-FirstButton=OK
AppSrvAdminInstPrefPanel-QandA22-Title=Information
AppSrvAdminInstPrefPanel-QandA22-Message=You have specified that the Application Server's Administration Server instance is running in the normal mode.
AppSrvAdminInstPrefPanel-QandA22-FirstButton=OK

# DAModuleNamePanel - Module name
#
DAModuleNamePanel-Gui-HeaderText=Module Name for this Web Application

DAModuleNamePanel-Gui-IntroText=Choose a module name for this web application. The name you specify here will be used when deploying this application on Application Server.

DAModuleNamePanel-Gui-OnlineHelp=Use this panel to specify a module name for this web application while deploying the application on Application Server. <ul><li><b>Module Name</b>: Enter the module name with which this web application needs to be deployed on Application Server.

DAModuleNamePanel-ConsoleInteraction=Module Name for this Web Application <p>Enter the module name with which this web application needs to be deployed in Application Server.

DAModuleNamePanel-ConsoleInteraction-ModuleNameQuestion=Enter the Module Name for this web application:

DAModuleNamePanel-Gui-TitleText=Enter the Module Name for this web application

DAModuleNamePanel-Gui-ModuleNameLabel=Module Name

DAModuleNamePanel-QandA1-Title=ERROR: Invalid Module Name
DAModuleNamePanel-QandA1-Message=The Module Name cannot be left blank. This is a mandatory field.
DAModuleNamePanel-QandA1-FirstButton=Choose New

DAModuleNamePanel-QandA2-Title=ERROR: Invalid Module Name
DAModuleNamePanel-QandA2-Message=The specified Module Name \"<tt>{0}</tt>\" is invalid. <br><br>Module Name should contain only characters from <tt>a-z</tt>, <tt>A-Z</tt>, <tt>0-9</tt>, ''<tt>-</tt>'' and ''<tt>_</tt>''.
DAModuleNamePanel-QandA2-FirstButton=Choose New

# Web Container User and Group Panel
# 
WebContainerUserGroupPanel-Gui-HeaderText=Web Container User and Group
WebContainerUserGroupPanel-Gui-IntroText=Enter the identity that the Web Container uses to run the services.
WebContainerUserGroupPanel-Gui-TitleText=Enter Web Container User and Group

WebContainerUserGroupPanel-Gui-OnlineHelp=Use this window to specify the identity that the Web Container uses to run the services. <p>Enter the identity that the Web Container uses to run the services. There are two properties associated with this identity: <b>User ID</b> and <b>Group ID</b>: The <b>User ID</b> is the user name from the user database. The <b>Group ID</b> is the group name from the group database. <p><b>NOTE</b>: The configurator program will install some files and directories containing sensitive data for example, passwords. The ownership to these files and directories are given to web container user and group mentioned in this panel. <b>Only</b> the web container user is given read and write permissions to these files and directories containing sensitive data. This prevents access to sensitive data by others. <p>Refer to the administration guide for information on the list of files and directories containing sensitive data.

WebContainerUserGroupPanel-ConsoleInteraction=Web Container User and Group <p>Enter the identity that the Web Container uses to run the services. There are two properties associated with this identity: <b>User ID</b> and <b>Group ID</b>: The <b>User ID</b> is the user name from the user database. The <b>Group ID</b> is the group name from the group database. <p><b>NOTE</b>: The configurator program will install some files and directories containing sensitive data for example, passwords. The ownership to these files and directories are given to web container user and group mentioned in this panel. <b>Only</b> the web container user is given read and write permissions to these files and directories containing sensitive data. This prevents access to sensitive data by others. <p>Refer to the administration guide for information on the list of files and directories containing sensitive data.

WebContainerUserGroupPanel-Gui-UserIdLabel=Web Container User ID
WebContainerUserGroupPanel-Gui-GroupIdLabel=Web Container Group ID

WebContainerUserGroupPanel-ConsoleInteraction-UserIdQuestion=Enter the Web Container User ID: 
WebContainerUserGroupPanel-ConsoleInteraction-GroupIdQuestion=Enter the Web Container Group ID: 

WebContainerUserGroupPanel-ProgressMsg-VerifyingUser=The configuration program is verifying whether the user <b>\"{0}\"</b> exists.
WebContainerUserGroupPanel-ProgressMsg-VerifyingGroup=The configuration program is verifying whether the group <b>\"{0}\"</b> exists.

WebContainerUserGroupPanel-QandA1-Title=Web Container User ID Required
WebContainerUserGroupPanel-QandA1-Message=The Web Container User ID cannot be left blank. This is a mandatory field.
WebContainerUserGroupPanel-QandA1-FirstButton=OK

WebContainerUserGroupPanel-QandA2-Title=Web Container Group ID Required
WebContainerUserGroupPanel-QandA2-Message=The Web Container Group ID cannot be left blank. This is a mandatory field.
WebContainerUserGroupPanel-QandA2-FirstButton=OK

WebContainerUserGroupPanel-QandA3-Title=Web Container User ID does not exist
WebContainerUserGroupPanel-QandA3-Message=The Web Container User ID <b>\"{0}\"</b> does not exist. <p>Please enter a valid User ID.
WebContainerUserGroupPanel-QandA3-FirstButton=Choose New

WebContainerUserGroupPanel-QandA4-Title=Web Container Group ID does not exist
WebContainerUserGroupPanel-QandA4-Message=The Web Container Group ID <b>\"{0}\"</b> does not exist. <p>Please enter a valid Group ID.
WebContainerUserGroupPanel-QandA4-FirstButton=Choose New

# for IsPathPanel
IsPathSelection-install-Gui-OnlineHelp = Enter the directory where the Sun Java(TM) System Access Manager is being installed.
IsPathSelection-ConsoleInteraction = Please enter the Access Manager Base Directory
IsPathSelection-ConsoleInteraction-DirectorySelectionQuestion = Access Manager Base Directory:

IsPathSelection-noamadmin-Title = You must choose the existing Access Manager Base Directory
IsPathSelection-noamadmin-Message = <b>The file \"{1}\" does not exist under the directory \"{0}\".</b><p>You must select the existing Access Manager Base Directory
IsPathSelection-noamadmin-ChooseNewButton = Choose New

IsPathSelection-Gui-HeaderText = Access Manager Base Directory
IsPathSelection-Gui-DirectorySelectionLabel = Please enter the Access Manager Base Directory
IsPathSelection-Gui-BrowseButton = Browse...

# schema 1 is not supported
IsPathSelection-schema1-Title = Schema 1 is not supported.
IsPathSelection-schema1-Message = Schema 1 is not supported with this tool. Please rerun comm_dssetup to modify the schema type that you will be using.
IsPathSelection-schema1-Exit = Exit

# UserPassword Panel for IS Amadmin user

IsAmadmin-Gui-IntroText = Please enter the Access Manager Top Level Administrator Information. The username is hard coded.
IsAmadmin-Gui-HeaderText = Access Manager Top Level Administrator
IsAmadmin-Gui-TitleText = Access Manager Top Level Administrator
IsAmadmin-Gui-UserLabel = Username: 
IsAmadmin-Gui-PasswordLabel = Password: 
IsAmadmin-install-Gui-OnlineHelp = This is the Access Manager Top Level Administrator Username and Password 

IsAmadmin-ConsoleInteraction-IntroText = Please enter the Access Manager Admin User and Password. The username is hard coded.

IsAmadmin-ConsoleInteraction-User = Username: 
IsAmadmin-ConsoleInteraction-Password = Password: 

IsAmadmin-noUser-Title = No User entered
IsAmadmin-noUser-Message = You must enter a user name
IsAmadmin-noUser-OkButton = OK

IsAmadmin-noPasswd-Title = No Password entered
IsAmadmin-noPasswd-Message = You must enter a passowrd
IsAmadmin-noPasswd-OkButton = OK

IsAmadmin-malformedurl = Internal Error, u/g url ({0})is malformed.
IsAmadmin-ldap-credentials-warning = Could not connect to LDAP server with the given credentials. Error code {0}. {1}
IsAmadmin-badcred-Title = Unable to validate credentials against the LDAP directory.
IsAmadmin-badcred-ChooseNewButton = Retry

# for ESPathPanel
ESPathSelection-install-Gui-OnlineHelp = Enter the path to the Web Server's instance directory, e.g. /opt/SUNWwbsvr/https-ketu.west.sun.com. Note that you should specify the Web Server that Access Manager is using.
ESPathSelection-ConsoleInteraction = Please enter the full path to the Web Server Instance Directory
ESPathSelection-ConsoleInteraction-DirectorySelectionQuestion = Web Server Instance Directory:

ESPathSelection-noserverxml-Title = You must choose the existing Web Server Instance Directory
ESPathSelection-noserverxml-Message = <b>The file \"{1}\" does not exist under the directory \"{0}\".</b><p>You must select the existing Web Server Instance Directory
ESPathSelection-noserverxml-ChooseNewButton = Choose New

ESPathSelection-Gui-HeaderText = Web Server Instance Directory
ESPathSelection-Gui-DirectorySelectionLabel = Please enter the Web Server Instance Directory
ESPathSelection-Gui-BrowseButton = Browse...

# UserPassword Panel - prefix of TLAUserPassword

TLAUserPassword-Gui-IntroText = You can create a new Top Level Administrator for the Default Organization
TLAUserPassword-Gui-HeaderText = Top Level Administrator for the Default Organization
TLAUserPassword-Gui-TitleText = Top Level Administrator for the Default Organization
TLAUserPassword-Gui-UserLabel = Username: 
TLAUserPassword-Gui-PasswordLabel = Password: 
TLAUserPassword-Gui-ConfirmLabel = Confirm Password: 
TLAUserPassword-install-Gui-OnlineHelp = Enter the username and password for the Top Level Administrator in the Default Organization you specified earlier. The user will be create if it does not already exist.

TLAUserPassword-ConsoleInteraction-IntroText = Please enter the User and Password for a top level administrator to be created in the Default Organization Name

TLAUserPassword-ConsoleInteraction-User = Username: 
TLAUserPassword-ConsoleInteraction-Password = Password: 
TLAUserPassword-ConsoleInteraction-Confirm = Confirm Password: 

TLAUserPassword-noUser-Title = No User entered
TLAUserPassword-noUser-Message = You must enter a user name
TLAUserPassword-noUser-OkButton = OK

TLAUserPassword-noPasswd-Title = No Password entered
TLAUserPassword-noPasswd-Message = You must enter a password
TLAUserPassword-noPasswd-OkButton = OK

TLAUserPassword-noMatch-Title = Passwords do not match
TLAUserPassword-noMatch-Message = The two passwords you entered are not identical.<p>Please reenter the same password twice.
TLAUserPassword-noMatch-OkButton = OK

# UserPassword Panel for IS Ldap user

IsLdapUserPassword-Gui-IntroText = Please enter the Access Manager Internal LDAP Authentication Password. The username is hard coded.
IsLdapUserPassword-Gui-HeaderText = Access Manager Internal LDAP Authentication Password
IsLdapUserPassword-Gui-TitleText = Access Manager Internal LDAP Authentication Password
IsLdapUserPassword-Gui-UserLabel = Username: 
IsLdapUserPassword-Gui-PasswordLabel = Password: 
IsLdapUserPassword-install-Gui-OnlineHelp = This is the Access Manager Internal LDAP Authnetication Username and Password 

IsLdapUserPassword-ConsoleInteraction-IntroText = Please enter the Access Manager Internal LDAP Authentication Password. The username is hard coded.
IsLdapUserPassword-ConsoleInteraction-User = Username: 
IsLdapUserPassword-ConsoleInteraction-Password = Password: 

IsLdapUserPassword-noUser-Title = No User entered
IsLdapUserPassword-noUser-Message = You must enter a user name
IsLdapUserPassword-noUser-OkButton = OK

IsLdapUserPassword-noPasswd-Title = No Password entered
IsLdapUserPassword-noPasswd-Message = You must enter a passowrd
IsLdapUserPassword-noPasswd-OkButton = OK

IsLdapUserPassword-malformedurl = Internal Error, u/g url ({0})is malformed.
IsLdapUserPassword-ldap-credentials-warning = Could not connect to LDAP server with the given credentials. Error code {0}. {1}
IsLdapUserPassword-badcred-Title = Unable to validate credentials against the LDAP directory.
IsLdapUserPassword-badcred-ChooseNewButton = Retry

#
# resources for panelName="ServicePackage" a wbTextFieldPanel
#
# this is <panelName>-Gui-HeaderText. They all get their prefix from
# the panelName attribute in the xml file for say the postInstall
# element

ServicePackage-install-Gui-OnlineHelp = Enter the DN in which to find the definition of all service packages

# main panel
ServicePackage-Gui-HeaderText = Service Packages Location
ServicePackage-Gui-IntroText = Please enter the DN in which to find the definition of all service packages.  Note that the DN must be located under the user/group suffix.

ServicePackage-Gui-TitleText = Service Packages Location
ServicePackage-Gui-TextLabel = Enter the DN

# screen that pops up when nothing is entered
ServicePackage-empty-Title = Invalid DN
ServicePackage-empty-Message = You must enter a value here
ServicePackage-empty-Dismiss = OK

# screen that pops up when nothing is entered
ServicePackage-QandA-Title = Invalid DN
ServicePackage-QandA-Message = You must enter a value here
ServicePackage-QandA-Dismiss = OK

# screen that pops up when OrgName is null
ServicePackage-nullOrg-Title = Invalid DN
ServicePackage-nullOrg-Message = You must enter a valid DN
ServicePackage-nullOrg-Dismiss = OK

# screen that pops up when entry is not a DN
ServicePackage-notDN-Title = Invalid DN
ServicePackage-notDN-Message = The entry does not conform to DN syntax.  Please make sure you enter a name that is a valid LDAP DN.
ServicePackage-notDN-Dismiss = OK

# screen that pops up when entry is equal to u/g suffix
# warning only
ServicePackage-sameAsUg-Title = Warning: Same as User/Group Suffix
ServicePackage-sameAsUg-Message = The Organization DN you chose is the User/Group Suffix. Although this is a valid choice, if you ever decide to use hosted domains, there will be difficult migration issues. If you do wish to use hosted domains, then specify a DN one level below the User/Group suffix.
ServicePackage-sameAsUg-Accept = OK
ServicePackage-sameAsUg-ChooseNew = Choose New

# screen that pops up when entry is not equal to u/g suffix or not
#   a descendant of u/g suffix
ServicePackage-notDescendant-Title = Invalid Organization DN, must be descendant of u/g suffix
ServicePackage-notDescendant-Message = The Organization DN \"{0}\" must be a descendant of the User/Group Suffx \"{1}\". Please try again.
ServicePackage-notDescendant-Dismiss = OK

# for command line
ServicePackage-Console-Intro = Please enter the DN in which to find the definition of all service packages. Note that the DN must be located under the user/group suffix.
ServicePackage-Console-Help = 
ServicePackage-Console-Prompt = Enter the DN

DAComponentsListener-none-Title = Components Selection
DAComponentsListener-none-Message = No component has been selected.  Please select at least one component from the list.
DAComponentsListener-none-Ok = OK

DAComponentsListener-remind-Title = Components Selection Reminder
DAComponentsListener-remind-Message = No server component has been selected.  Please make sure you configure the server somewhere for the command line and/or graphical user interface to work.
DAComponentsListener-remind-Ok = OK

WhatNextPanel-Gui-HeaderText=Post Configuration Instructions
WhatNextPanel-Gui-PostConfigSteps=You have successfully configured Delegated Administrator.<p> You are now requested to follow the <b> post configuration</b> instructions mentioned in Chapter 1 of the Sun Java System Delegated Administrator<b> Administration Guide.</b>
WhatNextPanel-ConsoleInteraction-PostConfigSteps=You have successfully configured Delegated Administrator. You are now requested to follow the  post configuration instructions mentioned in Chapter 1 of the Sun Java System Delegated Administrator Administration Guide.
WhatNextPanel-Gui-OnlineHelp=This panel explains post configuration instructions.
WhatNextPanel-Gui-Warning=<p><font color="#ff0000">WARNING:</font>{0} not installed. {0} is required for Delegated Administrator to work
WhatNextPanel-ConsoleInteraction-Warning=WARNING:{0} not installed. {0} is required for Delegated Administrator to work

# WebSrvPrefPanel - Web Server Instance preferences
#
commcliWebSrvPrefPanel-Gui-HeaderText=Web Server Configuration Details

commcliWebSrvPrefPanel-Gui-IntroText=Specify the local Web Server instance details used by the configurator to configure Delegated Administrator Server on Web Server.

commcliWebSrvPrefPanel-install-Gui-OnlineHelp=Enter the following web server instance details to configure Delegated Administrator Server: <ul><li><b>Server Root Directory Name</b>: Specify the local directory in which Web Server is installed. <li><b>Server Instance Identifier</b>: Enter the Web Server Identifier for which Delegated Administrator Server is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which Delegated Administrator Server is to be configured. <li><b>HTTP Port Number</b>: Enter the Web Server port number where HTTP service is available. </ul>

commcliWebSrvPrefPanel-ConsoleInteraction=Web Server Configuration Details <p>Specify the local Web Server instance details used by the configurator to configure Delegated Administrator Server on Web Server. Enter the following web server instance details to configure Delegated Administrator Server: <p><b>Server Root Directory Name</b>: Enter the local directory in which Web Server is installed. <p><b>Server Instance Identifier</b>: Enter the Web Server Identifier for which Delegated Administrator Server is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which Delegated Administrator Server is to be configured. <p><b>HTTP Port Number</b>: Enter the Web Server port number where HTTP service is available.

commcliWebSrvPrefPanel-Gui-TitleText=Enter Web Server Configuration Details

commcliWebSrvPrefPanel-Gui-installBrowseButton=Browse..

commcliWebSrvPrefPanel-Gui-websrvInstallDirLabel=Server Root Directory
commcliWebSrvPrefPanel-Gui-webSrvInstanceIdLabel=Server Instance Identifier
commcliWebSrvPrefPanel-Gui-webSrvVirtualSrvIdLabel=Virtual Server Identifier
commcliWebSrvPrefPanel-Gui-webSrvPortNumberLabel=HTTP Port

commcliWebSrvPrefPanel-QandA1-Title=ERROR: Invalid Web Sever Root Directory Name
commcliWebSrvPrefPanel-QandA1-Message=The Web Server Root directory Name cannot be left blank. This is a mandatory field.
commcliWebSrvPrefPanel-QandA1-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA2-Title=ERROR: Invalid Web Sever Root Directory Name
commcliWebSrvPrefPanel-QandA2-Message=The directory path \"<tt>{0}</tt>\" for the Web Server Root does not exist or is not a valid directory path. No such directory found.
commcliWebSrvPrefPanel-QandA2-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA3-Title=ERROR: Invalid Web Sever Root Directory Name
commcliWebSrvPrefPanel-QandA3-Message=The Web Server Root directory value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the wdeploy tool at \"<tt>{1}</tt>\".
commcliWebSrvPrefPanel-QandA3-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA4-Title=ERROR: Invalid Web Server Instance Identifier
commcliWebSrvPrefPanel-QandA4-Message=The Web Server Instance Identifier cannot be left blank. This is a mandatory field.
commcliWebSrvPrefPanel-QandA4-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA5-Title=ERROR: Invalid Web Server Instance Identifier
commcliWebSrvPrefPanel-QandA5-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the Web Server Instance Directory path \"<tt>{1}</tt>\".
commcliWebSrvPrefPanel-QandA5-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA6-Title=ERROR: Invalid Web Server Instance Identifier
commcliWebSrvPrefPanel-QandA6-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the magnus.conf file at \"<tt>{1}</tt>\".
commcliWebSrvPrefPanel-QandA6-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA7-Title=ERROR: Invalid Web Server Instance Identifier
commcliWebSrvPrefPanel-QandA7-Message=The Web Server Instance Identifier value \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.xml file at \"<tt>{1}</tt>\".
commcliWebSrvPrefPanel-QandA7-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA8-Title=ERROR: Invalid Virtual Server Identifier
commcliWebSrvPrefPanel-QandA8-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
commcliWebSrvPrefPanel-QandA8-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA9-Title=ERROR: Invalid Web Server Details
commcliWebSrvPrefPanel-QandA9-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
commcliWebSrvPrefPanel-QandA9-FirstButton=Continue
commcliWebSrvPrefPanel-QandA9-SecondButton=Correct


commcliWebSrvPrefPanel-QandA12-Title=ERROR: Invalid Web Server Instance Port Number
commcliWebSrvPrefPanel-QandA12-Message=Enter the Web Server Instance Port Number in the numeric format.
commcliWebSrvPrefPanel-QandA12-FirstButton=Choose New

commcliWebSrvPrefPanel-QandA13-Title=ERROR: Unable to connect to the Web Server host:port
commcliWebSrvPrefPanel-QandA13-Message=Unable to connect to the Web Server Instance \"<tt>{0}:{1}</tt>\".  <p>This may result in an incomplete configuration, if you accept the current Web Server Instance details. <p>Select Accept if you want to continue with the configuration using the current values.
commcliWebSrvPrefPanel-QandA13-FirstButton=Accept
commcliWebSrvPrefPanel-QandA13-SecondButton=Choose New


commcliWebSrvPrefPanel-ConsoleInteraction-websrvInstallDirQuestion=Enter Web Server Root Directory:
commcliWebSrvPrefPanel-ConsoleInteraction-webSrvInstanceIdQuestion=Enter Web Server Instance Identifier:
commcliWebSrvPrefPanel-ConsoleInteraction-webSrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
commcliWebSrvPrefPanel-ConsoleInteraction-webSrvPortNumberQuestion=Enter Web Server HTTP Port:

commcliWebSrvPrefPanel-ProgressMsg-VerifyingWebServerInstanceConnection=Verifying whether the Web Server Instance connection is alive

commcliWebSrvPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrvPrefPanel - Application Server Instance preferences
#
commcliAppSrvPrefPanel-Gui-HeaderText=Application Server Configuration Details

commcliAppSrvPrefPanel-Gui-IntroText=Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Server on Application Server.

commcliAppSrvPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server details used by the configurator to configure Delegated Administrator Server on Application Server. <p>Enter the following application server instance details to configure Delegated Administrator Server: <ul><li><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <li><b>Domain Directory</b>: Enter the Application Server domain directory. <li><b>Document Root Directory</b>: Enter the Application Server document root directory. <li><b>Server Instance Name</b>: Enter the Application Server Instance Name for which the Delegated Administrator Server is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administratro is to be configured. <li><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.</ul>

commcliAppSrvPrefPanel-ConsoleInteraction=Application Server Configuration Details <p>Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Server on Application Server. Enter the following application server instance details to configure Delegated Administrator Server: <p><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <p><b>Domain Directory</b>: Enter the Application Server domain directory. <p><b>Document Root Directory</b>: Enter the Application Server document root directory. <p><b>Server Instance Name</b>: Enter the Application Server Name for which the Delegated Administrator Server is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Server is to be configured. <p><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.

commcliAppSrvPrefPanel-Gui-TitleText=Enter Application Server Configuration Details

commcliAppSrvPrefPanel-Gui-installBrowseButton=Browse..

commcliAppSrvPrefPanel-Gui-appsrvInstallDirLabel=Install Directory
commcliAppSrvPrefPanel-Gui-appsrvDomainDirLabel=Domain Directory
commcliAppSrvPrefPanel-Gui-appsrvDocumentRootDirLabel=Document Root Directory
commcliAppSrvPrefPanel-Gui-appsrvInstanceNameLabel=Server Instance Name
commcliAppSrvPrefPanel-Gui-appsrvVirtualSrvIdLabel=Virtual Server Identifier
commcliAppSrvPrefPanel-Gui-appsrvPortNumberLabel=Server Instance HTTP Port

commcliAppSrvPrefPanel-QandA1-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrvPrefPanel-QandA1-Message=The Application Server Install Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA1-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA2-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrvPrefPanel-QandA2-Message=The Application Server Domain Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA2-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA3-Title=ERROR: Invalid Document Root Directory Name
commcliAppSrvPrefPanel-QandA3-Message=The Application Server Document Root Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA3-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA4-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrvPrefPanel-QandA4-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Install Directory does not exist or is not a valid directory path. No such directory found.
commcliAppSrvPrefPanel-QandA4-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA5-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrvPrefPanel-QandA5-Message=The Application Server Install Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the asadmin tool at \"<tt>{1}</tt>\".
commcliAppSrvPrefPanel-QandA5-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA6-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrvPrefPanel-QandA6-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Domain Directory does not exists or is not a valid directory path. No such directory found.
commcliAppSrvPrefPanel-QandA6-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA7-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrvPrefPanel-QandA7-Message=The Application Server Domain Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the admin-server directory at \"<tt>{1}</tt>\".
commcliAppSrvPrefPanel-QandA7-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA8-Title=ERROR: Invalid Document Root Directory Name
commcliAppSrvPrefPanel-QandA8-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Document Root Directory does not exists or is not a valid directory path. No such directory found.
commcliAppSrvPrefPanel-QandA8-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA9-Title=ERROR: Invalid Server Instance Name
commcliAppSrvPrefPanel-QandA9-Message=The Application Server Instance Name cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA9-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA10-Title=ERROR: Invalid Server Instance Name
commcliAppSrvPrefPanel-QandA10-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the Application Server Instance Directory path \"<tt>{1}</tt>\".
commcliAppSrvPrefPanel-QandA10-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA11-Title=ERROR: Invalid Server Instance Name
commcliAppSrvPrefPanel-QandA11-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.xml file at \"<tt>{1}</tt>\".
commcliAppSrvPrefPanel-QandA11-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA12-Title=ERROR: Invalid Server Instance Name
commcliAppSrvPrefPanel-QandA12-Message=The Application Server Instance Name \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.policy file at \"<tt>{1}</tt>\".
commcliAppSrvPrefPanel-QandA12-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA13-Title=ERROR: Invalid Virtual Server Identifier
commcliAppSrvPrefPanel-QandA13-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA13-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA14-Title=ERROR: Invalid Application Server Instance Port Number
commcliAppSrvPrefPanel-QandA14-Message=The Application Server Instance Port Number cannot be left blank. This is a mandatory field.
commcliAppSrvPrefPanel-QandA14-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA15-Title=ERROR: Invalid Application Server Instance Port Number
commcliAppSrvPrefPanel-QandA15-Message=Enter the Application Server Instance Port Number in the numeric format
commcliAppSrvPrefPanel-QandA15-FirstButton=Choose New

commcliAppSrvPrefPanel-QandA16-Title=ERROR: Unable to connect to the Application Server host:port
commcliAppSrvPrefPanel-QandA16-Message=Unable to connect to the Application Server Instance \"<tt>{0}:{1}</tt>\". <p>This may result in an incomplete configuration, if you accept the current Application Server Instance details. <p>Select Accept if you want to continue configuration using the current values.
commcliAppSrvPrefPanel-QandA16-FirstButton=Accept
commcliAppSrvPrefPanel-QandA16-SecondButton=Choose New

commcliAppSrvPrefPanel-QandA21-Title=ERROR: Invalid Application Server Details
commcliAppSrvPrefPanel-QandA21-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
commcliAppSrvPrefPanel-QandA21-FirstButton=Continue
commcliAppSrvPrefPanel-QandA21-SecondButton=Correct

commcliAppSrvPrefPanel-ConsoleInteraction-appsrvInstallDirQuestion=Enter Application Server Install Directory:
commcliAppSrvPrefPanel-ConsoleInteraction-appsrvDomainDirQuestion=Enter Application Server Domain Directory:
commcliAppSrvPrefPanel-ConsoleInteraction-appsrvDocumentRootDirQuestion=Enter Application Server Document Root Directory:
commcliAppSrvPrefPanel-ConsoleInteraction-appsrvInstanceNameQuestion=Enter Application Server Instance Name:
commcliAppSrvPrefPanel-ConsoleInteraction-appsrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
commcliAppSrvPrefPanel-ConsoleInteraction-appsrvPortNumberQuestion=Enter Application Server Instance HTTP Port:

commcliAppSrvPrefPanel-ProgressMsg-VerifyingAppServerInstanceConnection=Verifying whether the Application Server Instance connection is alive

commcliAppSrvPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrv8xPrefPanel - Application Server Instance preferences
#
commcliAppSrv8xPrefPanel-Gui-HeaderText=Application Server Configuration Details

commcliAppSrv8xPrefPanel-Gui-IntroText=Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Server on Application Server.

commcliAppSrv8xPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server details used by the configurator to configure Delegated Administrator Server on Application Server. <p>Enter the following application server instance details to configure Delegated Administrator Server: <ul><li><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <li><b>Domain Directory</b>: Enter the Application Server domain directory. <li><b>Document Root Directory</b>: Enter the Application Server document root directory. <li><b>Server Target Name</b>: Enter the Application Server Target Name for which the Delegated Administrator Server is to be configured. <li><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Server is to be configured. <li><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.</ul>

commcliAppSrv8xPrefPanel-ConsoleInteraction=Application Server Configuration Details <p>Specify the local Application Server instance details used by the configurator to configure Delegated Administrator Server on Application Server. Enter the following application server instance details to configure Delegated Administrator Server: <p><b>Install Directory</b>: Enter the local directory in which the Application Server is installed. <p><b>Domain Directory</b>: Enter the Application Server domain directory. <p><b>Document Root Directory</b>: Enter the Application Server document root directory. <p><b>Server Target Name</b>: Enter the Application Server Name for which the Delegated Administrator Server is to be configured. <p><b>Virtual Server Identifier</b>: Enter the Virtual Server Identifier for which the Delegated Administrator Server is to be configured. <p><b>Server Instance HTTP Port</b>: Enter the Application Server port number where HTTP service is available.

commcliAppSrv8xPrefPanel-Gui-TitleText=Enter Application Server Configuration Details

commcliAppSrv8xPrefPanel-Gui-installBrowseButton=Browse..

commcliAppSrv8xPrefPanel-Gui-appsrvInstallDirLabel=Install Directory
commcliAppSrv8xPrefPanel-Gui-appsrvDomainDirLabel=Domain Directory
commcliAppSrv8xPrefPanel-Gui-appsrvDocumentRootDirLabel=Document Root Directory
commcliAppSrv8xPrefPanel-Gui-appsrvTargetNameLabel=Server Target Name
commcliAppSrv8xPrefPanel-Gui-appsrvVirtualSrvIdLabel=Virtual Server Identifier
commcliAppSrv8xPrefPanel-Gui-appsrvPortNumberLabel=Server Instance HTTP Port

commcliAppSrv8xPrefPanel-QandA1-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrv8xPrefPanel-QandA1-Message=The Application Server Install Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA1-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA2-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrv8xPrefPanel-QandA2-Message=The Application Server Domain Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA2-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA3-Title=ERROR: Invalid Document Root Directory Name
commcliAppSrv8xPrefPanel-QandA3-Message=The Application Server Document Root Directory Name cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA3-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA4-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrv8xPrefPanel-QandA4-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Install Directory does not exist or is not a valid directory path. No such directory found.
commcliAppSrv8xPrefPanel-QandA4-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA5-Title=ERROR: Invalid Application Server Install Directory Name
commcliAppSrv8xPrefPanel-QandA5-Message=The Application Server Install Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the asadmin tool at \"<tt>{1}</tt>\".
commcliAppSrv8xPrefPanel-QandA5-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA6-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrv8xPrefPanel-QandA6-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Domain Directory does not exists or is not a valid directory path. No such directory found.
commcliAppSrv8xPrefPanel-QandA6-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA7-Title=ERROR: Invalid Application Server Domain Directory Name
commcliAppSrv8xPrefPanel-QandA7-Message=The Application Server Domain Directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the admin-server directory at \"<tt>{1}</tt>\".
commcliAppSrv8xPrefPanel-QandA7-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA8-Title=ERROR: Invalid Document Root Directory Name
commcliAppSrv8xPrefPanel-QandA8-Message=The directory path \"<tt>{0}</tt>\" for the Application Server Document Root Directory does not exists or is not a valid directory path. No such directory found.
commcliAppSrv8xPrefPanel-QandA8-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA9-Title=ERROR: Invalid Domain directory
commcliAppSrv8xPrefPanel-QandA9-Message=The Application Server Target Name cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA9-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA11-Title=ERROR: Invalid Domain directory
commcliAppSrv8xPrefPanel-QandA11-Message=The Application Server Domain directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the domain.xml file at \"<tt>{1}</tt>\".
commcliAppSrv8xPrefPanel-QandA11-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA12-Title=ERROR: Invalid Domain directory
commcliAppSrv8xPrefPanel-QandA12-Message=The Application Server Domain directory \"<tt>{0}</tt>\" is invalid. <p>Cannot find the server.policy file at \"<tt>{1}</tt>\".
commcliAppSrv8xPrefPanel-QandA12-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA13-Title=ERROR: Invalid Virtual Server Identifier
commcliAppSrv8xPrefPanel-QandA13-Message=The Virtual Server Identifier cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA13-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA14-Title=ERROR: Invalid Application Server Instance Port Number
commcliAppSrv8xPrefPanel-QandA14-Message=The Application Server Instance Port Number cannot be left blank. This is a mandatory field.
commcliAppSrv8xPrefPanel-QandA14-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA15-Title=ERROR: Invalid Application Server Instance Port Number
commcliAppSrv8xPrefPanel-QandA15-Message=Enter the Application Server Instance Port Number in the numeric format
commcliAppSrv8xPrefPanel-QandA15-FirstButton=Choose New

commcliAppSrv8xPrefPanel-QandA16-Title=ERROR: Unable to connect to the Application Server host:port
commcliAppSrv8xPrefPanel-QandA16-Message=Unable to connect to the Application Server Instance \"<tt>{0}:{1}</tt>\". <p>This may result in an incomplete configuration, if you accept the current Application Server Instance details. <p>Select Accept if you want to continue configuration using the current values.
commcliAppSrv8xPrefPanel-QandA16-FirstButton=Accept
commcliAppSrv8xPrefPanel-QandA16-SecondButton=Choose New

commcliAppSrv8xPrefPanel-QandA21-Title=ERROR: Invalid Application Server Details
commcliAppSrv8xPrefPanel-QandA21-Message=Select \"Continue\" to ignore the error messages and continue with the configuration procedure. Select \"Correct\" to return to the previous screen and enter another set of values.
commcliAppSrv8xPrefPanel-QandA21-FirstButton=Continue
commcliAppSrv8xPrefPanel-QandA21-SecondButton=Correct

commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvInstallDirQuestion=Enter Application Server Install Directory:
commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvDomainDirQuestion=Enter Application Server Domain Directory:
commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvDocumentRootDirQuestion=Enter Application Server Document Root Directory:
commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvTargetNameQuestion=Enter Application Server Instance Name:
commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvVirtualSrvIdQuestion=Enter Virtual Server Identifier:
commcliAppSrv8xPrefPanel-ConsoleInteraction-appsrvPortNumberQuestion=Enter Application Server Instance HTTP Port:

commcliAppSrv8xPrefPanel-ProgressMsg-VerifyingAppServerInstanceConnection=Verifying whether the Application Server Instance connection is alive

commcliAppSrv8xPrefPanel-Gui-SelectDirectoryDialogTitleText=Select the directory

# AppSrvAdminInstPrefPanel - Application Server: Administration Instance Details
# 
commcliAppSrvAdminInstPrefPanel-Gui-HeaderText=Application Server: Administration Instance Details
commcliAppSrvAdminInstPrefPanel-Gui-IntroText=Specify Application Server's Administration instance details used by the configurator to configure Delegated Administrator Server on Application Server.
commcliAppSrvAdminInstPrefPanel-Gui-TitleText=Enter Administration Instance Details
commcliAppSrvAdminInstPrefPanel-install-Gui-OnlineHelp=Use this window to specify Application Server's Administration instance details used by the configurator to configure Delegated Administrator Server on Application Server. <p>Enter the following Administration Server Instance details to configure Delegated Administrator Server: <ul> <li><b>Administration Server Port</b>: Enter the Administration Server port number. <li><b>Administrator User ID</b>: Enter the administrator user identifier. <li><b>Administrator Password</b>: Enter the administrator password. <li><b>Secure Administration Server Instance</b>: Specify whether the Application Server's Administration Instance is running in secure mode. </ul>
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction=Application Server: Administration Instance Details <p>Enter the following Administration Server instance details to configure Delegated Administrator Server: <p><b>Administration Server Port</b>: Enter the Administration Server port number. <p><b>Administrator User ID</b>: Enter the administrator user identifier. <p><b>Administrator Password</b>: Enter the administrator password. <p><b>Secure Administration Server Instance</b>: Specify whether the Application Server's Administration Instance is running in secure mode.
commcliAppSrvAdminInstPrefPanel-Gui-AdminPortLabel=Administration Server Port
commcliAppSrvAdminInstPrefPanel-Gui-AdminUserIDLabel=Administrator User ID
commcliAppSrvAdminInstPrefPanel-Gui-AdminPasswordLabel=Administrator Password
commcliAppSrvAdminInstPrefPanel-Gui-IsSecureAdminServerLabel=Secure Administration Server Instance
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-AdminPortQuestion=Enter the Administration Server Port:
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-AdminUserIDQuestion=Enter the Administrator User ID:
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-AdminPasswordQuestion=Enter the Administrator Password: 
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-IsSecureAdminServerQuestion=Is the Administration Server instance running in the secure mode ?
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-yesAnswer=yes
commcliAppSrvAdminInstPrefPanel-ConsoleInteraction-noAnswer=no
commcliAppSrvAdminInstPrefPanel-ProgressMsg-VerifyingASAdminServerInstanceConnection=Verifying whether the Administration Server instance connection is alive
commcliAppSrvAdminInstPrefPanel-QandA1-Title=ERROR: Invalid Administration Server Port Number
commcliAppSrvAdminInstPrefPanel-QandA1-Message=The Administration Server Port Number cannot be left blank. This is a mandatory field.
commcliAppSrvAdminInstPrefPanel-QandA1-FirstButton=Choose New
commcliAppSrvAdminInstPrefPanel-QandA2-Title=ERROR: Invalid Administration Server Port Number
commcliAppSrvAdminInstPrefPanel-QandA2-Message=Enter the Administration Server Port Port Number in the numeric format
commcliAppSrvAdminInstPrefPanel-QandA2-FirstButton=Choose New
commcliAppSrvAdminInstPrefPanel-QandA3-Title=ERROR: Unable to connect to the Administration Server host:port
commcliAppSrvAdminInstPrefPanel-QandA3-Message=Unable to connect to the Administration Server instance \"<tt>{0}:{1}</tt>\". <p>It is mandatory to have the Application Server's Administration Service available for configuring Delegated Administrator Server on Application Server. <p>Please try again.
commcliAppSrvAdminInstPrefPanel-QandA3-FirstButton=OK
commcliAppSrvAdminInstPrefPanel-QandA4-Title=ERROR: Invalid Administrator User ID
commcliAppSrvAdminInstPrefPanel-QandA4-Message=The Administrator User ID cannot be left blank. This is a mandatory field.
commcliAppSrvAdminInstPrefPanel-QandA4-FirstButton=OK
commcliAppSrvAdminInstPrefPanel-QandA5-Title=ERROR: Invalid Administrator Password
commcliAppSrvAdminInstPrefPanel-QandA5-Message=The Administrator Password cannot be left blank. This is a mandatory field.
commcliAppSrvAdminInstPrefPanel-QandA5-FirstButton=OK
commcliAppSrvAdminInstPrefPanel-QandA21-Title=Information
commcliAppSrvAdminInstPrefPanel-QandA21-Message=You have specified that the Application Server's Administration Server instance is running in the secure mode.
commcliAppSrvAdminInstPrefPanel-QandA21-FirstButton=OK
commcliAppSrvAdminInstPrefPanel-QandA22-Title=Information
commcliAppSrvAdminInstPrefPanel-QandA22-Message=You have specified that the Application Server's Administration Server instance is running in the normal mode.
commcliAppSrvAdminInstPrefPanel-QandA22-FirstButton=OK

#
# resources for panelName="SP" a ServicePackagePanel
#
SP-install-Gui-OnlineHelp = Please specify whether you want to load sample service packages and organizations into directory server.

# main panel
SP-Gui-HeaderText = Service Package and Organization Samples
SP-Gui-IntroText = Please choose whether to load sample Service Packages and Organizations into Directory

SP-Gui-TitleText = Please make your selection
SP-Gui-Cos = Load sample service packages
SP-Gui-Org = Load sample Organizations
SP-Gui-tfMailhost = Preferred Mailhost for Sample

# screen that pops up when nothing is entered
SP-empty-Title = Invalid preferred mailhost
SP-empty-Message = You must enter a value here
SP-empty-Dismiss = OK

# screen that pops up when non-FQDN is entered
SP-InvalidMailhost-Title = Invalid preferred mailhost
SP-InvalidMailhost-Message = You must enter a fully qualified host name here
SP-InvalidMailhost-Dismiss = OK

# for command line
SP-ConsoleInteraction-IntroText = Please choose whether to load sample Service Packages and Organizations into Directory
SP-ConsoleInteraction-Help = 
SP-ConsoleInteraction-cosQuestion = Do you want to load sample service packages?
SP-ConsoleInteraction-orgQuestion = Do you want to load sample organizations?
SP-ConsoleInteraction-mhQuestion = Please enter preferred mailhost for the sample organizations
SP-ConsoleInteraction-yesAnswer = Y
SP-ConsoleInteraction-yesAnswer1 = y
SP-ConsoleInteraction-noAnswer = N
SP-ConsoleInteraction-noAnswer1 = n
