![]() |
![]() |
![]() |
![]() |
Basic Configuration Folder
The basic configuration folder includes these properties:
- Unique Card Terminal Name - Contains a unique name to identify this reader.
- Model Name - Contains the manufacturer's model name for the card reader you selected from the Add Reader Dialog Box.
Do not change the model name unless you are upgrading to a version of the card reader with a new model name.
- Device Port - Requires the fully-qualified device name for the port where the reader is attached, for example /dev/cua/b for serial port b.
To Define Basic Properties for Your Card Reader
- Type a unique name for your card reader in the Unique Card Terminal Name property, or accept the default name in the field.
If you have more than one card reader of the same type attached to the host, you must type unique card terminal names for each reader.
- Type the model name for the card reader only if you are using a newer version of the card reader than the one with the model name displayed.
- Type the name of the device port where the reader is attached.
Sun Microsystems, Inc. http://www.sun.com |
![]() |
![]() |
![]() |
![]() |