OpenVMS] VAXMANA02_071 VAX V7.1 AUTOGEN ECO Summary
TITLE: OpenVMS] VAXMANA02_071 VAX V7.1 AUTOGEN ECO Summary
Modification Date: 07-JUL-1999
Modification Type: Updated Kit: Supersedes VAXMANA01_071
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
OP/SYS: OpenVMS VAX
COMPONENT: AUTOGEN
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: VAXMANA02_071
ECO Kits Superseded by This ECO Kit: VAXMANA01_071
ECO Kit Approximate Size: 792 Blocks
Kit Applies To: OpenVMS VAX V7.1
System/Cluster Reboot Necessary: Yes
Rolling Re-boot Supported: Yes
Installation Rating: INSTALL_3
3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for AUTOGEN on OpenVMS VAX V7.1. This kit addresses
the following problems:
Problems Addressed in the VAXMANA02_071 Kit:
o The SYSMAN security profile is supposed to be identical on all
nodes in a cluster that use the same security environment.
However, SYSMAN could use the authorize privileges from the
UAF, instead of the locally set privileges on some nodes.
For example, for a cluster named CLUSTER, node NODE1 should
have the same privilege settings as another node in the
cluster, NODE2.
SYSMAN> set env/clus
%SYSMAN-I-ENV, current command environment:
Clusterwide on local cluster
Username SYSTEM (*** will be used on non-local nodes)
SYSMAN> show profile
SYSMAN-I-DEFDIR, default directory on node NODE2 --
SYS$SYSROOT:[SYSMGR]
%SYSMAN-I-DEFPRIV, process privileges on node NODE2 --
TMPMBX
OPER
NETMBX
%SYSMAN-I-DEFDIR, default directory on node NODE1 --
SYS$SYSROOT:[SYSMGR]
%SYSMAN-I-DEFPRIV, process privileges on node NODE1 --
CMKRNL CMEXEC CMEXEC SYSNAM
GRPNAM ALLSPOOL IMPERSONATE DIAGNOSE
LOG_IO GROUP ACNT PRMCEB
PRMMBX PSWAPM ALTPRI SETPRV
TMPMBX WORLD MOUNT OPER
EXQUOTA NETMBX VOLPRO PHY_IO
BUGCHK PRMGBL SYSGBL PFNMAP
SHMEM SYSPRV BYPASS SYSLCK
SHARE UPGRADE DOWNGRADE GRPPRV
READALL IMPORT AUDIT SECURITY
Images(s) Affected: [SYSLIB]SMI$SHR.EXE
Problems Addressed in the VAXMANA01_071 Kit:
o A 6000-class VAX machine that booted off a DSSI disk kept
getting into the DOSD code. The system then concluded that
the configuration could not support DOSD and terminated at
TESTFILES.
Member disks of a shadowed boot disk were tested for DOSD
support, before the configuration was tested for support
eligibility. The problem appeared to be complicated more
because DUMPFILE_DEVICE was defined to the string
"SYS$SYSDEVICE:".
INSTALLATION NOTES:
The images in this kit will not take effect until the system is
rebooted. If there are other nodes in the VMScluster, they must
also be rebooted in order to make use of the new image(s).
If it is not possible or convenient to reboot the entire cluster at
this time, a rolling re-boot may be performed.
All trademarks are the property of their respective owners.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
European Site
Files on this server are as follows:
vaxmana02_071.README
vaxmana02_071.CHKSUM
vaxmana02_071.CVRLET_TXT
vaxmana02_071.a-dcx_vaxexe
vaxmana02_071.CVRLET_TXT
