OpenVMS VAXLMF01_U2055 V5.5-2 VAX 7000/10000 LMF$LURT.DAT ECO Summary

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 

Copyright (c) Digital Equipment Corporation 1996.  All rights reserved.

PRODUCT:    OpenVMS VAX

COMPONENT:  License Management Facility (LMF) - LMF$LURT.DAT

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  VAXLMF01_U2055
     ECO Kits Superseded by This ECO Kit:  None
     ECO Kit Approximate Size:  100 Blocks
     Kit Applies To:  OpenVMS VAX V5.5-2, V5.5-2H4
     System/Cluster Reboot Necessary:  No


ECO KIT SUMMARY:

An ECO kit exists for LMF$LURT.DAT on OpenVMS VAX V5.5-2 through 
V5.5-2H4.  This kit addresses the following problems: 

Problems Addressed in the VAXLMF01_U2055 Kit:

  o  The VAX 7000/10000 Model 800 CPUs have different LURT unit
     requirements than the Model 600 CPUs.  With the COMPAT_MODE set to
     V55, the Model 800 CPU is presented to OpenVMS VAX 5.5-2 as a Model
     600 CPU.  Therefore, the LURT UNIT requirements must be modified to
     operate the Model 800 CPUs.  This kit provides the correct LURT
     units to allow recognition of the Model 800 as a valid system. 

     It should be noted that this fix has the following restrictions: 

       -  Support for the Model 700 on OpenVMS VAX V5.5-2 is not
          provided. 

       -  More than 4 Model 600 processors on OpenVMS VAX V5.5-2 is not
          supported. 

       -  The maximum memory supported on Model 800 with OpenVMS VAX
          V5.5-2 is restricted to 512MB. 

       -  Model 600 systems are *not* supported on V5.5-2 with the LURT
          this kit applied. 


INSTALLATION NOTES:

The system does not need to be rebooted after this kit is installed.
However, if you have other nodes in your OpenVMS VMScluster, they should
be rebooted or you should install this kit on each system in order to
make use of the new image(s). 

vaxlmf01_u2055.README
vaxlmf01_u2055.CHKSUM
vaxlmf01_u2055.CVRLET_TXT
vaxlmf01_u2055.a-dcx_vaxexe