SNALU62 SNALU62_V323 SNA APPC/LU6.2 V3.2 for Tru64 UNIX ECO SUMMARY
TITLE: SNALU62 SNALU62_V323 SNA APPC/LU6.2 V3.2 for Tru64 UNIX ECO SUMMARY
Modification Date: 13-SEP-99
Modification Type: Updated Kit Supersedes SNALU62_V322
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
PRODUCT: DIGITAL SNA APPC/LU6.2 Programming Interface V3.2
for Compaq Tru64 UNIX (formerly DIGITAL UNIX)
OP/SYS: Compaq Tru64 UNIX [R]
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: SNALU62_V323
ECO Kits Superseded by This ECO Kit: SNALU62_V322
ECO Kit Approximate Size: 9000 Blocks
Kit Applies To: SNA APPC/LU6.2 Programming Interface for
Tru64 UNIX V3.2
Compaq Tru64 UNIX V4.0D through V5.0
System/Cluster Reboot Necessary: No
Installation Rating: N/A
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
INSTALLATION NOTE: This is not an update kit and the current
version of the LU6.2 Product must be deleted
before installing this ECO.
ECO KIT SUMMARY:
An ECO kit exists for SNA APPC/LU6.2 Programming Interface V3.2 on
Compaq Tru64 UNIX V4.0D - 5.0 (formerly DIGITAL UNIX). The DEC SNA LU6.2
Programming Interface Release Notes contain a complete explanation of this
release. This kit addresses the following problems:
Problems Addressed in SNALU62_V323:
o BIND incorrectly rejected with sense code 0835
o Add prototype for routine snalu62_cancel_conversation()
o Allow definition of Remote LUs with identical Unqualified LU names
o CPIC verb may hang with multiple conversations
o Invalid DEFINE_TP command output to configuration file
o Support for Digital UNIX V5.0 added
Problems Addressed in SNALU62_V322:
o Could not shorten LU-LU password
o Server would hang if BIND image was rejected
o BIND response could overwrite end of buffer
o Add support required for BACKOUT verb implementation
o CPIC verbs after CMRCV failed with CM_OPERATION_NOT_ACCEPTED
More information regarding the nature of these problems can be found in
the ECO kit's release notes.
Problems Addressed in SNALU62_V321:
o SEGV when deallocating the CP_LOCAL data structure
o Security Type was not saved in the configuration file
o A null string for the LU-LU password was not allowed
o Wrong error message TPNRET was returned
o Correct logging of TP name
o snalu62_wait_for_completion() could SEGV
o Yacc table overflow
o BIND response without Control Vectors being rejected
More information regarding the nature of these problems can be found in
the ECO kit's release notes.
This problem is fixed in the next release of SNA APPC/LU6.2
Programming Interface for Compaq Tru64 UNIX.
INSTALLATION NOTES:
The ECO kit is distributed as a tar file containing the kit which can be
installed using the setld command. The tar file should be unpacked to
a suitable directory and then the setld command issued specifying that
directory as the source of the kit.
For example, if the tar file containing the kit has been copied to
/usr/tmp/snalu62323.tar:
# mkdir /usr/tmp/snalu62323
# cd /usr/tmp/snalu62323
# tar xf /usr/tmp/snalu62323.tar
# setld -l .
If the kit is delivered on tap11 then the commands would be:
# mkdir /usr/tmp/snalu62323
# cd /usr/tmp/snalu62323
# tar x
# setld -l .
Note that this is not an update kit, and the current version of the LU6.2
Product must be deleted before installing this ECO.
Once the kit is installed, you should follow the instructions in the
installation guide's After installation section.
[R] UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited
All trademarks are the property of their respective owners.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
European Site
Files on this server are as follows:
snalu62_v323.README
snalu62_v323.CHKSUM
snalu62_v323.CVRLET_TXT
snalu62_v323.tar
snalu62_v323.CVRLET_TXT
