SNALU62 SNALU62_V322 SNA APPC/LU6.2 V3.2 for Tru64 UNIX ECO Summary

TITLE: SNALU62 SNALU62_V322 SNA APPC/LU6.2 V3.2 for Tru64 UNIX ECO Summary

Modification Date:  14-JUN-99                  
Modification Type:  Updated Kit  Supersedes SNALU62_V321

Copyright (c) Compaq Computer Corporation 1999.  All rights reserved.

PRODUCT:    DIGITAL SNA APPC/LU6.2 Programming Interface V3.2
              for Compaq Tru64 UNIX (formerly DIGITAL UNIX)

OP/SYS:     Compaq Tru64 UNIX [R]

SOURCE:     Compaq Computer Corporation

ECO INFORMATION:

     ECO Kit Name:  SNALU62_V322
     ECO Kits Superseded by This ECO Kit:  SNALU62_V321
     ECO Kit Approximate Size:  9740 Blocks
     Kit Applies To:  SNA APPC/LU6.2 Programming Interface for 
                        Tru64 UNIX V3.2 
                      Compaq Tru64 UNIX V4.0 through V4.0D 
     System/Cluster Reboot Necessary:  No
     Installation Rating:  N/A
     Kit Dependencies:

       The following remedial kit(s) must be installed BEFORE
       installation of this kit:

         None 

       In order to receive all the corrections listed in this
       kit, the following remedial kits should also be installed:

         None 

     INSTALLATION NOTE:  This is not an update kit and the current    
                         version of the LU6.2 Product must be deleted        
                         before installing this ECO.    


ECO KIT SUMMARY:

An ECO kit exists for SNA APPC/LU6.2 Programming Interface V3.2 on
Compaq Tru64 UNIX V4.0 - 4.0D (formerly DIGITAL UNIX).  The DEC SNA LU6.2 
Programming Interface Release Notes contain a complete explanation of this   
release.  This kit addresses the following problems: 

Problems Addressed in SNALU62_V322:

  o Could not shorten LU-LU password

  o Server would hang if BIND image was rejected

  o BIND response could overwrite end of buffer

  o Add support required for BACKOUT verb implementation

  o CPIC verbs after CMRCV failed with CM_OPERATION_NOT_ACCEPTED

More information regarding the nature of these problems can be found in
the ECO kit's release notes.



Problems Addressed in SNALU62_V321:

  o  SEGV when deallocating the CP_LOCAL data structure

  o  Security Type was not saved in the configuration file

  o  A null string for the LU-LU password was not allowed

  o  Wrong error message TPNRET was returned

  o  Correct logging of TP name

  o  snalu62_wait_for_completion() could SEGV

  o  Yacc table overflow

  o  BIND response without Control Vectors being rejected

More information regarding the nature of these problems can be found in
the ECO kit's release notes.

     This problem is fixed in the next release of SNA APPC/LU6.2 
     Programming Interface for Compaq Tru64 UNIX.


INSTALLATION NOTES:

The ECO kit is distributed as a tar file containing the kit which can be
installed using the setld command.  The tar file should be unpacked to 
a suitable directory and then the setld command issued specifying that 
directory as the source  of the kit.

For example, if the tar file containing the kit has been copied to 
/usr/tmp/snalu62322.tar:

# mkdir /usr/tmp/snalu62322
# cd /usr/tmp/snalu62322
# tar xf /usr/tmp/snalu62322.tar
# setld -l .

If the kit is delivered on tap11 then the commands would be:

# mkdir /usr/tmp/snalu62322
# cd /usr/tmp/snalu62322
# tar x
# setld -l .

Note that this is not an update kit, and the current version of the LU6.2     
Product must be deleted before installing this ECO.                          

Once the kit is installed, you should follow the instructions in the
installation guide's After installation section.


[R]  UNIX is a registered trademark in the United States and other
     countries licensed exclusively through X/Open Company Limited    

All trademarks are the property of their respective owners.

snalu62_v322.README
snalu62_v322.CHKSUM
snalu62_v322.CVRLET_TXT
snalu62_v322.tar
snalu62_v322.CVRLET_TXT