**************************** ECO SUMMARY INFORMATION **************************** Release Date: 16-Apr-07 Kit Name: DEC-AXPVMS-DWMOTIF_ECO03-V0105--4 Kit Applies To: OpenVMS Alpha 8.2 Approximate Kit Size: 12951 blocks Installation Rating: INSTALL_3 Reboot Required: No Superseded Kits: DEC-AXPVMS-DWMOTIF_ECO02-V0105--4 Mandatory Kit Dependencies: VMS82A_PCSI-V0100 Optional Kit Dependencies: None Checksums: DEC-AXPVMS-DWMOTIF_ECO03-V0105--4.PCSI-DCX_AXPEXE Checksum: 2178049677 DEC-AXPVMS-DWMOTIF_ECO03-V0105--4.PCSI-DCX_AXPEXE MD5 Checksum: 7DD0D0089FDAE84B5706CCCA3AE042F9 ======================================================================= Hewlett-Packard OpenVMS ECO Release Notes ======================================================================= ECO NUMBER: DEC-AXPVMS-DWMOTIF_ECO03-V0105--4 1 KIT NAME: DEC-AXPVMS-DWMOTIF_ECO03-V0105--4 2 KIT DESCRIPTION: 2.1 Installation Rating: INSTALL_3 : To be installed by customers experiencing the problems corrected. This installation rating, based upon current CLD information, is provided to serve as a guide to which customers should apply this remedial kit. (Reference attached Disclaimer of Warranty and Limitation of Liability Statement) 2.2 Reboot Requirement: No reboot is necessary after installation of this kit, however additional post installation steps are required to make full use of images provided. Refer to section "7.3 Special Installation Instructions" for post-installation steps. 2.3 Version(s) of OpenVMS to which this kit may be applied: OpenVMS Alpha Version 8.2 2.4 New functionality or new hardware support provided: No. 3 KITS SUPERSEDED BY THIS KIT: DEC-AXPVMS-DWMOTIF_ECO02-V0105--4 4 KIT DEPENDENCIES: 4.1 The following remedial kit(s), or later, must be installed BEFORE installation of this, or any required kit: - VMS82A_PCSI-V0100 Page 2 4.2 In order to receive all the corrections listed in this kit, the following remedial kits, or later, should also be installed: - None 5 FILES PATCHED OR REPLACED: o [CDE$DEFAULTS.SYSTEM.BIN]CDE$RESTARTLOGIN.EXE image name: "CDE$RESTARTLOGIN" image file identification: "V1.0" image file build identification: "" link date/time: 14-MAR-2007 09:59:08.50 linker identification: "A11-50" o [CDE$DEFAULTS.SYSTEM.BIN]DTPAD.EXE image name: "DTPAD" image file identification: "V1.0" image file build identification: "" link date/time: 14-MAR-2007 10:23:15.19 linker identification: "A11-50" o [CDE$DEFAULTS.SYSTEM.BIN]DTWM.EXE image name: "DTWM" image file identification: "V1.0" image file build identification: "" link date/time: 14-MAR-2007 10:10:26.03 linker identification: "A11-50" o [CDE$DEFAULTS.SYSTEM.BIN]DXIMAGEVIEW.EXE image name: "DXIMAGEVIEW" image file identification: "V1.0" image file build identification: "" link date/time: 14-MAR-2007 10:53:56.88 linker identification: "A11-50" o [SYSEXE]DECW$CALENDAR.EXE image name: "DECW$CALENDAR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:16:08.87 linker identification: "A11-50" Page 3 o [SYSEXE]DECW$CARDFILER.EXE image name: "DECW$CARDFILER" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:19:03.51 linker identification: "A11-50" o [SYSEXE]DECW$LBXPROXY.EXE image name: "DECW$LBXPROXY" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:21:15.14 linker identification: "A11-50" o [SYSEXE]DECW$MWM.EXE image name: "DECW$MWM" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:16:32.11 linker identification: "A11-50" o [SYSLIB]CDE$LIBDTWIDGET.EXE image name: "CDE$LIBDTWIDGET" image file identification: "V1.0" image file build identification: "" link date/time: 14-MAR-2007 09:56:04.21 linker identification: "A11-50" o [SYSLIB]DECW$D2DXLIBSHR.EXE image name: "DECW$D2DXLIBSHR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:45:09.12 linker identification: "A11-50" o [SYSLIB]DECW$DXMLIBSHR12.EXE image name: "DECW$DXMLIBSHR12" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:47:55.18 linker identification: "A11-50" Page 4 o [SYSLIB]DECW$ICELIB.EXE image name: "DECW$ICELIB" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:31:25.45 linker identification: "A11-50" o [SYSLIB]DECW$LOGINOUT.EXE image name: "DECW$LOGINOUT" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:19:24.47 linker identification: "A11-50" o [SYSLIB]DECW$MRMLIBSHR12.EXE image name: "DECW$MRMLIBSHR12" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:47:42.16 linker identification: "A11-50" o [SYSLIB]DECW$SMSHR.EXE image name: "DECW$SMSHR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:43:02.75 linker identification: "A11-50" o [SYSLIB]DECW$XEXTLIBSHR.EXE image name: "DECW$XEXTLIBSHR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:45:21.35 linker identification: "A11-50" Page 5 o [SYSLIB]DECW$XLIBSHR.EXE (new image) image name: "DECW$XLIBSHR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:44:20.82 linker identification: "A11-50" o [SYSLIB]DECW$XMLIBSHR12.EXE image name: "DECW$XMLIBSHR12" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:46:59.66 linker identification: "A11-50" o [SYSLIB]DECW$XMULIBSHRR5.EXE image name: "DECW$XMULIBSHRR5" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:46:33.92 linker identification: "A11-50" o [SYSLIB]DECW$XTLIBSHRR5.EXE image name: "DECW$XTLIBSHRR5" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:45:29.75 linker identification: "A11-50" o [SYSLIB]DECW$XTRAPLIBSHRR5.EXE image name: "DECW$XTRAPLIBSHRR5" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:45:40.11 linker identification: "A11-50" o [SYSLIB]VUE$MASTERSHR.EXE image name: "VUE$MASTERSHR" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 09:18:37.74 linker identification: "A11-50" o [SYSLIB]XIE$SHRLIB.EXE image name: "X IMAGING EXTENSION CLIENT LIBRARY" image file identification: "DW V1.5-070314" image file build identification: "" link date/time: 14-MAR-2007 08:45:01.68 linker identification: "A11-50" o [CDE$DEFAULTS.SYSTEM.CONFIG]XFAILSAFE.COM Page 6 6 NEW FUNCTIONALITY AND/OR PROBLEMS ADDRESSED IN THE DEC-AXPVMS-DWMOTIF_ECO03-V0105--4.PCSI kit 6.1 Problems addressed in this kit 6.1.1 CREATE/TERM ACCVIO after DWMOTIF V1.5 ECO2 is installed 6.1.1.1 Problem Description: After installing DWMOTIF V1.5 ECO2 on OpenVMS Alpha V8.2, a CREATE /TERM with DECnet as transport could cause an ACCVIO. This problem has now been fixed. Images Affected: - DECW$XLIBSHR.EXE 6.1.1.2 CLDs, and QARs reporting this problem: 6.1.1.2.1 CLD(s) QXCM1000406870 6.1.1.2.2 QAR(s) None. 6.1.1.3 Problem Analysis: None. 6.1.1.4 Work-arounds: None. 6.1.2 Applications using the function DtCreateHelpDialog() may crash after DWMOTIF V1.5 ECO2 is installed 6.1.2.1 Problem Description: DECwindows Motif/Japanese applications that make use of the function DtCreateHelpDialog() may crash after installing DWMOTIF V1.5 ECO2. This problem has now been fixed. Page 7 Images Affected: - DECW$XLIBSHR.EXE 6.1.2.2 CLDs, and QARs reporting this problem: 6.1.2.2.1 CLD(s) None. 6.1.2.2.2 QAR(s) 75-24-1642 6.1.2.3 Problem Analysis: None. 6.1.2.4 Work-arounds: None. Page 8 7 INSTALLATION INSTRUCTIONS 7.1 Compressed File This kit is provided as a DCX compressed kit. To expand this file to the installable PCSI file, run the file with a RUN file_name command. When the file is run you will see the following output: $ RUN DEC-AXPVMS-DWMOTIF_ECO03-V0105--4.PCSI-DCX_AXPEXE FTSV DCX auto-extractible compressed file for OpenVMS (AXP) FTSV V3.0 -- FTSV$DCX_AXP_AUTO_EXTRACT Copyright (c) Digital Equipment Corp. 1993 Options: [output_file_specification] [input_file_specification] The decompressor needs to know the filename to use for the decompressed file. If you don't specify any, it will use the original name of the file before it was compressed, and create it in the current directory. If you specify a directory name, the file will be created in that directory. Decompress into (file specification): If you want the file to be expanded into a different directory, enter the directory specification. DO NOT enter a new file name. The expanded file must retain the original name. If you want to expand the file via batch, the command file must contain an answer to the Decompress into "(file specification)" question, either a or an alternate directory specification. Note: - Note that this kit contains the following header files that were included in the DECwindows Motif Version 1.5 ECO1 kit: XLIB.H XLIBINT.H XPOLL.H These header files have not been modified for this kit. They have been included only to enable this kit supersede the ECO1 kit. - This kit also contains the following files that were included in the DECwindows Motif Version 1.5 ECO2 kit: Page 9 [CDE$DEFAULTS.SYSTEM.BIN]CDE$RESTARTLOGIN.EXE [CDE$DEFAULTS.SYSTEM.BIN]DTPAD.EXE [CDE$DEFAULTS.SYSTEM.BIN]DTWM.EXE [CDE$DEFAULTS.SYSTEM.BIN]DXIMAGEVIEW.EXE [SYSEXE]DECW$CALENDAR.EXE [SYSEXE]DECW$CARDFILER.EXE [SYSEXE]DECW$LBXPROXY.EXE [SYSEXE]DECW$MWM.EXE [SYSLIB]CDE$LIBDTWIDGET.EXE [SYSLIB]DECW$D2DXLIBSHR.EXE [SYSLIB]DECW$DXMLIBSHR12.EXE [SYSLIB]DECW$ICELIB.EXE [SYSLIB]DECW$LOGINOUT.EXE [SYSLIB]DECW$MRMLIBSHR12.EXE [SYSLIB]DECW$SMSHR.EXE [SYSLIB]DECW$XEXTLIBSHR.EXE [SYSLIB]DECW$XMLIBSHR12.EXE [SYSLIB]DECW$XMULIBSHRR5.EXE [SYSLIB]DECW$XTLIBSHRR5.EXE [SYSLIB]DECW$XTRAPLIBSHRR5.EXE [SYSLIB]VUE$MASTERSHR.EXE [SYSLIB]XIE$SHRLIB.EXE [CDE$DEFAULTS.SYSTEM.CONFIG]XFAILSAFE.COM These files have not been modified for this kit. They have been included only to enable this kit supersede the ECO2 kit. - This kit contains a modified version of the DECW$LBXPROXY image. This image is placed in sys$system if you have selected the LBXPROXY option while installing the DECwindows Motif kit. - If you decide to select the "LBXPROXY" option at this time, you need to use the PRODUCT RECONFIGURE command (along with the V1.5 kit) and then install this kit. - The header files (XLIB.H, XLIBINT.H, XPOLL.H) will be supplied if the "C Programming Support" option is selected while installing the DECwindows Motif kit. - If you decide to select the "C Programming Support" option at this time, you need to use the PRODUCT RECONFIGURE command (along with the V1.5 kit) and then install this kit. Page 10 7.2 Installation Command Install this kit with the POLYCENTER Software installation utility by logging into the SYSTEM account, and typing the following at the DCL prompt: PRODUCT INSTALL DWMOTIF_ECO03 /SAVE_RECOVERY_DATA [/SOURCE=location of Kit] The /SAVE_RECOVERY_DATA qualifier is optional but highly recommended. Using this qualifier will allow easy removal of the kit from the system in the event of problems. The kit location may be a tape drive, CD, or a disk directory that contains the kit. The /SOURCE qualifier is not needed if the PRODUCT INSTALL command is executed from the same directory as the kit location. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt. 7.3 Special Installation Instructions: The DECwindows server needs to be restarted after the patch installation. $ @sys$startup:decw$startup restart 8 COPYRIGHT AND DISCLAIMER: (C) Copyright 2007 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP and/or its subsidiaries required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Page 11 Neither HP nor any of its subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY THIS PATCH IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY APPLICABLE LAW. IN NO EVENT WILL HP BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WITH RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH PATCH.