ECO NUMBER: VMS73_CLUSTER-V0200 PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.3 UPDATE PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.3 COVER LETTER 1 KIT NAME: VMS73_CLUSTER-V0200 2 KITS SUPERSEDED BY THIS KIT: VMS73_CLUSTER-V0100 3 KIT DEPENDENCIES: 3.1 The following remedial kit(s), or later, must be installed BEFORE installation of this, or any required kit: VMS73_UPDATE-V0100 3.2 In order to receive all the corrections listed in this kit, the following remedial kits, or later, should also be installed: None. 4 KIT DESCRIPTION: 4.1 Version(s) of OpenVMS to which this kit may be applied: OpenVMS Alpha V7.3 4.2 Files patched or replaced: o [SYSEXE]CONFIGURE.EXE (new image) o [SYSEXE]STACONFIG.EXE (new image) o [SYSEXE]SYSINIT.EXE (new image) o [SYS$STARTUP]VMS$INITIAL-050_CONFIGURE.COM (new file) 5 PROBLEMS ADDRESSED IN VMS73_CLUSTER-V0200 KIT o The VMS73_CLUSTER-V0100 kit erroneously referred to OpenVMS versions V7.3R and V7.2-1R rather than the correct versions of V7.3 and V7.2-1. This kit corrects that information. Note that this kit is a documentation correction only. If you have installed the VMS73_CLUSTER-V0100 ECO kit, you do not need to -- COVER LETTER -- Page 2 14 January 2002 install the VMS73_CLUSTER-V0200 ECO kit. 6 PROBLEMS ADDRESSED IN VMS73_CLUSTER-V0100 KIT o After upgrading from V7.2-1 to V7.3 a system can crash with a PROCGONE bugcheck during boot. R0 in the bugcheck would contain the error 1C04A, %RMS-E-DNF, directory not found. The boot process is looking for the LANACP.EXE image in the non-existent directory DSA0:[SYSEXE]. Crashdump Summary Information ----------------------------- Bugcheck Type: PROCGONE, Process not in system VMS Version: V7.3 Current Process: LANACP Current Image: Failing PC: FFFFFFFF.8025CB20 EXE$EXIT_INT_C+001E0 Failing PS: 18000000.00000001 Module: IMAGE_MANAGEMENT (Link Date/Time: 17-MAR-2001 03:27:48.69) Offset: 0000EB20 Images Affected: - [SYSEXE]SYSINIT.EXE o System does not start up, because there are not enough votes to start the cluster when the quorum disk is not found. Images Affected: - [SYSEXE]SYSINIT.EXE - [SYSEXE]STACONFIG.EXE - [SYSEXE]CONFIGURE.EXE - [SYS$STARTUP]VMS$INITIAL-050_CONFIGURE.COM 7 KIT INSTALLATION RATING: The following kit installation rating, based upon current CLD information, is provided to serve as a guide to which customers should apply this remedial kit. (Reference attached Disclaimer of Warranty and Limitation of Liability Statement) -- COVER LETTER -- Page 3 14 January 2002 INSTALLATION RATING: INSTALL_1 : To be installed by all customers. 8 INSTALLATION INSTRUCTIONS: Install this kit with the POLYCENTER Software installation utility by logging into the SYSTEM account, and typing the following at the DCL prompt: PRODUCT INSTALL VMS73_CLUSTER /SOURCE=[location of Kit] The kit location may be a tape drive, CD, or a disk directory that contains the kit. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt This kit requires a system reboot. Compaq strongly recommends that a reboot is performed immediately after kit installation to avoid system instability If you have other nodes in your OpenVMS cluster, they must also be rebooted in order to make use of the new image(s). If it is not possible or convenient to reboot the entire cluster at this time, a rolling re-boot may be performed. 8.1 Special Installation Instructions: 8.1.1 Scripting of Answers to Installation Questions During installation, this kit will ask and require user response to several questions. If you wish to automate the installation of this kit and avoid having to provide responses to these questions, you must create a DCL command procedure that includes the following definitions and commands: - $ DEFINE/SYS NO_ASK$BACKUP TRUE - $ DEFINE/SYS NO_ASK$REBOOT TRUE - Add the following qualifiers to the PRODUCT INSTALL command and add that command to the DCL procedure. /PROD=DEC/BASE=AXPVMS/VER=V2.0 - De-assign the logicals assigned For example, a sample command file to install the VMS73_CLUSTER-V0200 kit would be: -- COVER LETTER -- Page 4 14 January 2002 $ $ DEFINE/SYS NO_ASK$BACKUP TRUE $ DEFINE/SYS NO_ASK$REBOOT TRUE $! $ PROD INSTALL VMS73_CLUSTER/PROD=DEC/BASE=AXPVMS/VER=V2.0 $! $ DEASSIGN/SYS NO_ASK$BACKUP $ DEASSIGN/SYS NO_ASK$REBOOT $! $ exit Copyright (c) Compaq Computer Corporation, 2002 All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. COMPAQ, the Compaq logo, VAX, Alpha, VMS, and OpenVMS are registered in the U.S. Patent and Trademark Office. All other product names mentioned herein may be trademarks of their respective companies. Confidential computer software. Valid license from Compaq required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY THIS PATCH IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY APPLICABLE LAW. IN NO EVENT WILL COMPAQ BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WITH RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH PATCH.