**************************** ECO SUMMARY INFORMATION **************************** Release Date: 20-DEC-2006 Kit Name: DEC-AXPVMS-VMS732_TZ-V0300--4.PCSI$COMPRESSED Kit Applies To: OpenVMS ALPHA V7.3-2 Approximate Kit Size: 1910 blocks Installation Rating: INSTALL_3 Reboot Required: No Superseded Kits: VMS732_TZ-V0200 Mandatory Kit Dependencies: VMS732_UPDATE-V0900 or later VMS732_PCSI-V0300 or later Optional Kit Dependencies: None Checksums: VMS732_TZ-V0300.ZIPEXE Checksum: 3015759696 DEC-AXPVMS-VMS732_TZ-V0300--4.PCSI$COMPRESSED Checksum: 2425939081 VMS732_TZ-V0300.ZIPEXE MD5 Checksum: 34ECB4D9AF4265B62D085C4C60825B21 DEC-AXPVMS-VMS732_TZ-V0300--4.PCSI$COMPRESSED MD5 Checksum: 4964FB9BC214014DF21911915F4FB4B1 ======================================================================= Hewlett-Packard OpenVMS ECO Cover Letter ======================================================================= 1 KIT NAME: VMS732_TZ-V0300 2 KIT DESCRIPTION: 2.1 Installation Rating: INSTALL_3 : To be installed by customers experiencing the problems corrected. 2.2 Reboot Requirement: No reboot is necessary after installation of this kit. 2.3 Version(s) of OpenVMS to which this kit may be applied: OpenVMS ALPHA V7.3-2 2.4 New functionality or new hardware support provided: Yes 3 KITS SUPERSEDED BY THIS KIT: - VMS732_TZ-V0200 4 KIT DEPENDENCIES: 4.1 The following remedial kit(s), or later, must be installed BEFORE installation of this, or any required kit: - VMS732_PCSI-V0300 - VMS732_UPDATE-V0900 4.2 In order to receive all the corrections listed in this kit, the following remedial kits, or later, should also be installed: - None Page 2 5 NEW FUNCTIONALITY AND/OR PROBLEMS ADDRESSED IN THE VMS732_TZ-V0300 KIT 5.1 New functionality addressed in this kit 5.1.1 Changes to Daylight Savings Time 5.1.1.1 Functionality Description: The Energy Policy Act of 2005 will change the start and end times for Daylight Savings time in the U.S. Beginning in 2007, Daylight Savings time will start on the second Sunday in March (instead of the first Sunday in April) and end on the first Sunday in November (instead of the last Sunday in October). In addition, there are a number of counties in Indiana that will be changing this year from the Eastern U.S. time zone to the Central U.S. time zone. The VMS732_TZ-V0200 patch kit, provided the OpenVMS functionality necessary to implement these Daylight Savings time changes in the United States. This kit adds Support for Canada. The following timezones have been changed: Africa/Cairo Africa/Tunis America/Bogota America/Cambridge_Bay America/Campo_grande America/Glace_Bay America/Cuiaba America/Dawson America/Edmonton America/Goose_bay America/Guatemala America/Halifax America/Havana America/Yellowknife America/Iqaluit America/Inuvik America/Knox_IN America/Managua America/Miquelon America/Moncton America/Montevideo America/Montreal America/Nipigon America/Pangnirtung America/Port-au-prince America/Rainy_River America/Rankin_Inlet America/Sao_paulo America/St_johns America/Tegucigalpa America/Thule America/Thunder_Bay America/Toronto America/Vancouver America/Whitehorse America/Winnipeg America/Yellowknife Asia/Amman Asia/Baku Asia/Bishkek Asia/Choibalsan Asia/Colombo Asia/Damascus Asia/Gaza Asia/Hovd Asia/Samarkand Asia/Tashkent Asia/Tbilisi Asia/Tehran Asia/Ulaanbaatar Asia/Ulan_bator Canada/Atlantic Canada/Central Canada/Eastern Canada/Mountain Page 3 Canada/Newfoundland Canada/Pacific Canada/Yukon Atlantic/Bermuda Brazil/East Chile/Easterisland Cuba Egypt Iran Pacific/Easter US/Indiana-Starke The following timezones have been added: America/Atikokan America/Blanc-Sablon America/Indiana/Vincennes America/Indiana/Petersburg America/Moncton America/North_Dakota/New_Salem Europe/Guernsey Europe/Isle_of_Man Europe/Jersey Europe/Podgorica Europe/Volgograd The following timezones have been deleted: SystemV/AST4ADT SystemV/EST5EDT SystemV/CST6CDT SystemV/MST7MDT SystemV/PST8PDT SystemV/YST9YDT SystemV/AST4 SystemV/EST5 SystemV/CST6 SystemV/MST7 SystemV/PST8 SystemV/YST9 SystemV/HST10 Images Affected: - [SYSEXE]ZIC.EXE - [SYS$ZONEINFO.SYSTEM]YEARISTYPE.COM - All [SYS$ZONEINFO.SYSTEM] timezone files. 6 FILES PATCHED OR REPLACED: o [SYSEXE]ZIC.EXE (new image) Image Identification Information image name: "ZIC" image file identification: "V4.12" image file build identification: "XA99-0060110000" link date/time: 28-MAR-2006 09:21:55.19 linker identification: "A11-50" Overall Image Checksum: 465901107 Page 4 o [SYS$ZONEINFO.SYSTEM]YEARISTYPE.COM (new file) o [000000]DEC-AXPVMS-VMS-V0703-2-2.PCSI$DESCRIPTION (new file) o All [SYS$ZONEINFO.SYSTEM] timezone files. To see a full list of the files replaced, execute a PROD LIST VMS732_TZ/SEL= * command after expanding the compressed download file. 7 FILES REMOVED: The following time zone files are removed by this kit: o Files removed from the [SYS$ZONEINFO.SYSTEM] directory: GMT-1. GMT-10. GMT-11. GMT-12. GMT-2. GMT-3. GMT-4. GMT-5. GMT-6. GMT-7. GMT-8. GMT-9. GMT1. GMT10. GMT11. GMT12. GMT13. GMT2. GMT3. GMT4. GMT5. GMT6. GMT7. GMT8. GMT9. GMTPLUS1. GMTPLUS10. GMTPLUS11. GMTPLUS12. GMTPLUS13. GMTPLUS2. GMTPLUS3. GMTPLUS4. GMTPLUS5. GMTPLUS6. GMTPLUS7. GMTPLUS8. GMTPLUS9. SYSTEMV.DIR o Files removed from the [SYS$ZONEINFO.SYSTEM.SYSTEMV] directory: AST4. AST4ADT. CST6. CST6CDT. EST5. EST5EDT. HST10. MST7. MST7MDT. PST8. PST8PDT. YST9. YST9YDT. o Files removed from the [SYS$ZONEINFO.SYSTEM.MEXICO] directory: CHIHUAHUA. SONORA. 8 INSTALLATION INSTRUCTIONS 8.1 Test/Debug Image Loss In the course of debugging problems reported to OpenVMS Engineering, customers may be given debug or point-fix images to install. Typically, these images do not have the same image generation flags contained in images released via the OpenVMS remedial patch process. Because of this, any debug or point-fix image that is in the SYS$COMMON area, will be replaced by any image of the same name installed by this kit. If this occurs, you will lose any functionality that is provided by the replaced image. If you wish to retain these debug or point-fix images, you can take the following steps: Page 5 o Prior to installing this kit, move the test/debug image(s) to be saved to the SYS$SPECIFIC area. o During kit installation, you will be asked if you wish to delete the image(s) in SYS$SPECIFIC. You should answer NO for each image that you want to keep. o After installation completes, but before rebooting the system (if required), move the image(s) from SYS$SPECIFIC back to SYS$COMMON. 8.2 Compressed File This kit is provided as a DCX compressed kit. To expand this file to the installable .PCSI file, run the file with a RUN file_name command. When the file is run you will see the following output: $ RUN VMS732_TZ-V0300.ZIPEXE FTSV DCX auto-extractible compressed file for OpenVMS (AXP) FTSV V3.0 -- FTSV$DCX_AXP_AUTO_EXTRACT Copyright (c) Digital Equipment Corp. 1993 Options: [output_file_specification] [input_file_specification] The decompressor needs to know the filename to use for the decompressed file. If you don't specify any, it will use the original name of the file before it was compressed, and create it in the current directory. If you specify a directory name, the file will be created in that directory. Decompress into (file specification): If you want the file to be expanded into a different directory, enter the directory specification. DO NOT enter a new file name. The expanded file must retain the original name. If you want to expand the file via batch, the command file must contain an answer to the"Decompress into (file specification)" question, either a or an alternate directory specification 8.3 Installation Command Install this kit with the POLYCENTER Software installation utility by logging into the SYSTEM account, and typing the following at the DCL prompt: PRODUCT INSTALL VMS732_TZ[/SOURCE=location of Kit] Note that this kit will install with the /SAVE_RECOVERY_DATA option turned on. Using this qualifier will allow easy removal of the kit from the system in the event of problems. If you wish to disable this option you must use the /NOSAVE_RECOVERY_DATA qualifier on the PRODUCT INSTALL command. The /SAVE_RECOVERY_DATA qualifier is Page 6 optional but highly recommended. Using this qualifier will allow easy removal of the kit from the system in the event of problems. The kit location may be a tape drive, CD, or a disk directory that contains the kit. The /SOURCE qualifier is not needed if the PRODUCT INSTALL command is executed from the same directory as the kit location. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt. 8.4 Scripting of Answers to Installation Questions During installation, this kit will ask and require user response to several questions. If you wish to automate the installation of this kit and avoid having to provide responses to these questions, you must create a DCL command procedure that includes the following logical name definitions and commands: o To avoid the BACKUP question, define the following: $ DEFINE/SYS NO_ASK$BACKUP TRUE o Add the following qualifiers to the PRODUCT INSTALL command and add that command to the DCL procedure. /PROD=DEC/BASE=AXPVMS/VER=V3.0 [/SOURCE=location of Kit] o De-assign the logical names assigned For example, a sample command file to install the VMS732_TZ-V0300 kit would be: $ DEFINE/SYS NO_ASK$BACKUP TRUE $! $ PROD INSTALL VMS732_TZ/PRODUCER=DEC/BASE=AXPVMS/VER=V3.0" $! $ DEASSIGN/SYS NO_ASK$BACKUP $! $ exit $! 8.5 Special Installation Instructions: The following instructions apply to users who have set the time zone to GMT-* or GMTPLUS* : The definition of the timezone names has been changed in the time-zone public database (ftp://elsie.nci.nih.gov/pub/). The effect of this change is that, after installation of the VMS732_TZ-V0300 kit, "GMT-" (minus) will now mean "ahead (east) of" Greenwich Mean Time (GMT) and "GMTPLUS" will now mean "behind (west) of" GMT. For example, GMT-1 will mean one hour ahead (east) Page 7 of GMT and the Time Differential Factor (SYS$TIMEZONE_DIFFERENTIAL) will be set to "3600". GMTPLUS1 will mean one hour behind (west) of GMT and the SYS$TIMEZONE_DIFFERENTIAL will be set to "-3600". This is the opposite meaning of what you are used to. In order to correct for this, after installation of this kit, users must run the SYS$MANAGER:UTC$TIME_SETUP.COM command file and set the timezone to the opposite of what was originally set. For example, if you had previously set the timezone to GMTPLUS*, you must now set the timezone to GMT-* to account for the timezone definition changes. For usage of UTC$TIME_SETUP.COM, see the HP OpenVMS System Manager's Manual. 9 COPYRIGHT AND DISCLAIMER: (C) Copyright 2006 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP and/or its subsidiaries required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Neither HP nor any of its subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY THIS PATCH IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY APPLICABLE LAW. IN NO EVENT WILL HP BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WITH RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH PATCH.