HP Services Software Patches - vaxdism01_062

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 
Copyright (c) Digital Equipment Corporation 1996.  All rights reserved.

OP/SYS:     OpenVMS VAX

COMPONENT:  TAPE, DISMOUNT  (DISMNTSHR.EXE, SYSMSG.EXE)

PRODUCT:    Storage Library System for OpenVMS (SLS)

COMPONENT:  Remote Tape Facility (RTF)

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  VAXDISM01_062
     ECO Kits Superseded by This ECO Kit:  None
     ECO Kit Size:  Saveset A -   72 Blocks
                    Saveset B -  630 Blocks
                    Saveset C -  630 Blocks
                 Cover Letter -    5 Blocks

             Total of 4 files - 1337 Blocks

     Kit Applies To:  OpenVMS VAX V6.1, V6.2
     System/Cluster Reboot Necessary:  Yes

NOTE:  In order for the images in this remedial kit to execute properly,
       the VAXSHAD09 remedial kit for OpenVMS VAX V6.1 must be installed
       first.  If you have not yet installed this kit, for assistance in
       obtaining the VAXSHAD09 remedial kit please contact your normal
       Digital support channel. 


ECO KIT SUMMARY:

An ECO kit exists for OpenVMS VAX V6.1 and V6.2.  This kit addresses the
following problems: 

  o  SSRVEXCEPT in DISMNTSHR when a user (or application) attempts to
     DISMOUNT a tape that is in use by RTF/SLS.

     This problem is corrected in OpenVMS VAX V7.0


INSTALLATION NOTES:

In order for the corrections in this kit to take effect, the system must
be rebooted.  If the system is a member of a VMScluster, the entire
cluster should be rebooted. 

NOTE:  In order for the images in this remedial kit to execute properly,
       the VAXSHAD09 remedial kit for OpenVMS VAX V6.1 must be installed
       first.  If you have not yet installed this kit, for assistance in
       obtaining the VAXSHAD09 remedial kit please contact your normal
       Digital support channel. 

Files on this server are as follows:

»vaxdism01_062.README
»vaxdism01_062.CHKSUM
»vaxdism01_062.CVRLET_TXT
»vaxdism01_062.a-dcx_vaxexe
»vaxdism01_062.b-dcx_vaxexe
»vaxdism01_062.c-dcx_vaxexe