|
|
 |
HP Services Software Patches - dec-vaxvms-dnvosieco04-v0601--4
|
Copyright (c) Digital Equipment Corporation 1995. All rights reserved.
PRODUCT: DECnet/OSI V6.1 for OpenVMS VAX
OP/SYS: OpenVMS VAX
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: DNVOSI_ECO04061
ECO Kits Superseded by This ECO Kit: DNVOSI_ECO03061
DNVOSI_ECO01061
ECO Kit Approximate Size: 7010 Blocks
Kit Applies To: DECnet/OSI V6.1 for OpenVMS VAX
OpenVMS VAX V6.1
NOTE: To verify that the you are running the
correct version of DECnet/OSI, enter the
following NCL command:
NCL Show Implementation
System Reboot Necessary: Yes
ECO KIT SUMMARY:
An ECO kit exists for DECnet/OSI V6.1 for OpenVMS VAX on OpenVMS VAX V6.1.
This kit addresses the following problems.
Corrections for BASE Components:
o Image SYS$LIBRARY:CDI$SHR.EXE
- Correct local 'simple name' processing.
- Correct error returned to Session for NET$ACP processing.
o Image SYS$SYSTEM:NET$ACP.EXE
- Include for CDI$SHR.EXE.
o Image SYS$UPDATE:NET$CONVERT_DATABASE.EXE
- Remove the illegal FDDI command for Station Buffers that
prevented startup.
o Image SYS$LOADABLE_IMAGES:NET$DRIVER.EXE
- Fix pool leak where VCRPs fail to be deallocated.
- Notify the $QIO interface when the incoming connection timer
expires and the incoming connection has not been explicitly
accepted or rejected by the target task.
o Image SYS$LOADABLE_IMAGES:NET$OSDRIVER.EXE
- Include with NET$DRIVER.
o Image SYS$LOADABLE_IMAGES:NET$ROUTING_ES.EXE
- On a single circuit prevent unnecessary probe packets.
- On a point-to-point circuit a stale PDU size and pointer were
used for the source NSAP which was used for cache table look up.
o Image SYS$LOADABLE_IMAGES:NET$SESSION_CONTROL.EXE
- Correct pool leak of WQEs.
- Prevent PGFILPHI crash in GetLocalNodeInfo
- Second fix to prevent PGFILPHI crash in GetLocalNodeInfo
- Report delete session control port to I/O-status
in mailbox for 3rd party disconnect.
- Prevent crash on session ports in the WFCNTOCMP state.
- Server processes are not correctly being reused.
- Correct possible pool corruption.
o Image SYS$LOADABLE_IMAGES:NET$TRANSPORT_NSP.EXE
- Prevent idle links from dropping when the link service ACK is
lost.
o Image SYS$LOADABLE_IMAGES:NET$TRANSPORT_OSI.EXE
- Fix chained receive used by X.25 or TCP/IP which could cause an
application to abort.
- Prevent error in Show DTE address with NCL.
- Fix congestion avoidance to prevent the window from closing.
- Fix shutdown crash in deallocate TLQs.
- Fix race condition crash.
- Fix memory leak with X.500 and RFC1006
- Fix active connection count becoming negative.
- Fix crash c_retrans_ak.
- Fix bad throughput.
o Image SYS$LOADABLE_IMAGES:SYS$NETWORK_SERVICES.EXE
- Update ECO number in DECnet version "050704"
o New trace images included in SYS$LIBRARY for compatibility
- CTF$DNA_ANALYZE.EXE
- CTF$ESEVENT_ANALYZE.EXE
- CTF$NSPTP_ANALYZE.EXE
- CTF$OSITP_ANALYZE.EXE
- CTF$SCL_ANALYZE.EXE
- CTF$VOTS_ANALYZE.EXE
Corrections for DECdns Client Components:
o Image SYS$LOADABLE_IMAGES:SYS$NAME_SERVICES.EXE
SYS$SYSTEM:DNS$ADVER.EXE
SYS$SYSTEM:DNS$CONFIGURE.EXE
SYS$SYSTEM:DNS$CONTROL.EXE
SYS$LIBRARY:DNS$PI.EXE
- Clerk Memory leak in convert string fullname to opaque routine.
- Clerk Non-paged pool memory leak
Corrections for VAX P.S.I Components:
o Image SYS$LOADABLE_IMAGES:PSI$GAP.EXE
- Fix for NCB on call accept.
o Image SYS$LOADABLE_IMAGES:LES$DECNET_V30.EXE
- Include for PSI$GAP.
o Image SYS$LOADABLE_IMAGES:PSI$L3CS.EXE
- Fix X.25 counters to be correctly decremented.
- Fix X.25 called and calling address with an odd number of
digits.
NOTE: The DECnet/OSI V6.1 ECO kit #1 incorrectly placed
PSI$L3CS.EXE in SYS$COMMON:[SYSEXE]. The PSI$L3CS.EXE
in SYS$COMMON:[SYSEXE] should be deleted.
o Image SYS$LOADABLE_IMAGES:PSI$L3CS-NMD.EXE
- Fix crash when a buffer passed to EXE$CHKPRO_INT is too small
and attempts to write to a page with User Read Protection.
- Fix X.25 called and calling address with an odd number of
digits.
o Corrections made to FCNS file in MOM$SYSTEM
- FCNS$MCNM_PRF.DAT
FCNS$X25L2_PRF.DAT
FCNS$X25L3_PRF.DAT
INSTALLATION NOTES:
This ECO is installed using the POLYCENTER Software Installation
utility.
Product Kit Name: DNVOSIECO04
PCSI Kit Name: DEC-VAXVMS-DNVOSIECO04-V0601--4.PCSI
In order for the corrections in this kit to take effect, the system must be
rebooted. If the system is a member of a VAXcluster, the entire cluster
should be rebooted.
INSTALLATION CAUTION:
Due to an error in the POLYCENTER Software Installation, it is not
possible to install DEC VAXVMS OSAK V3.0 or DEC VAXVMS FTAM V3.2 after
installing this ECO kit.
OSAK and FTAM PCSI installations require DECnet/OSI V6.1 which causes
the installation process to remove DNVOSIECO04. This will leave the
system without a SYS$NETWORK_SERVICES.EXE and rebooting is not possible.
The original installation order must be preserved. This will be
corrected in a future release.
Installation Order
Place each PCSI kit in a unique source directory
1) DEC VAXVMS DECNET_OSI V6.1 /Source=[KITS.DECNET]
2) DEC VAXVMS OSAK V3.0-A /Source=[KITS.OSAK]
3) DEC VAXVMS FTAM V3.2-B /Source=[KITS.FTAM]
4) DEC VAXVMS DNVOSIECO04 V6.1 /Source=[KITS.ECO]
|
Files on this server are as follows:
|
»dec-vaxvms-dnvosieco04-v0601--4.README
»dec-vaxvms-dnvosieco04-v0601--4.CHKSUM
»dec-vaxvms-dnvosieco04-v0601--4.pcsi-dcx_vaxexe
|
