|
|
HP Services Software Patches - vaxprts02_070
|
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
*OpenVMS] VAXPRTS02_070 VAX V5.5-2 - V7.0 Print Symbiont ECO Summary
Copyright (c) Digital Equipment Corporation 1995, 1996. All rights reserved.
PRODUCT: OpenVMS VAX
COMPONENT: Print Symbiont
PRTSMB.EXE
SMBSRVSHR.EXE
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: VAXPRTS02_070
ECO Kits Superseded by This ECO Kit: VAXPRTS01_070
VAXPRTS01_062
VAXPRTS01_061
VAXQMAN02_061 (VAXQMAN)
VAXQMAN01_061 (CSCPAT_1176)
VAXQMAN02_060
VAXQMAN01_060 (CSCPAT_1175)
VAXQMAN8_U2055
VAXQMAN07_U2055 (CSCPAT_1165)
VAXQMAN06_U2055
VAXQMAN05_U2055
VAXQMAN04_U2055
VAXQMAN03_U2055
QMAN$02_U2055
QMAN$01_U2055
ECO Kit Approximate Size: 791 Blocks
Saveset A - 90 Blocks
Saveset B - 108 Blocks
Saveset C - 108 Blocks
Saveset D - 162 Blocks
Saveset E - 144 Blocks
Saveset F - 144 Blocks
Cover Letter - 35 Blocks
Kit Applies To: OpenVMS VAX V5.5-2, V5.5-2H4, V5.5-2HF,
V6.0, V6.1, V6.2, V7.0
System/Cluster Reboot Necessary: Yes
Installation Rating: 3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
NOTE: In order to receive the full fixes listed in this kit,
the following remedial kits also need to be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for PRTSMB and SMBSRVSHR on OpenVMS VAX V5.5-2 - V7.0.
This kit addresses the following problems:
Problems Addressed in the VAXPRTS02_070 Kit for OpenVMS VAX V6.1, V6.2
and V7.0:
o A file which contains a form feed code at the end of the
record prints in unexpected format. The format of the
following page is destroyed.
o User modified symbionts using the LAT protocol and a user work
area terminate with %SYSTEM-F-ABORT when a print job is
queued.
o On OpenVMS Version 7.0 or higher, printing a VFC file on
either PRTSYM or LATSYM, gives an invalid prefix control
character, even though the prefix control character is a valid
"C0" control character.
On OpenVMS Version 6.2 or lower, when printing a VFC file on
either PRTSYM or LATSYM, the process goes into 100% CPU
utilization.
Problems Addressed in the VAXPRTS01_070 Kit for OpenVMS VAX V6.1, V6.2:
o When a print request encounters a security violation on an input
file at the time of printing, the symbiont does not close the file.
The symbiont signals the error:
Job X (queue COLA, entry 3) terminated with error status
%PSM-E-OPENIN, error opening !AS as input
but the input file does not get closed.
Problems Addressed in the VAXPRTS01_070 Kit for OpenVMS VAX V6.1, V6.2,
V7.0:
o Symbiont processes may die with "SYSTEM-F-INSFMEM, insufficient
dynamic memory". The problem has been observed under the following
scenarios:
- Restarting a large print job to begin printing at a specific
page. For example:
$ PRINT/PAGE=(90000,90001) A_BIG_PRINTOUT.LIS
- UCX$TELNET symbiont process managing 16 queues with lots of
print activity.
- Batch/Print high speed test symbionts running with 16 - 32
queues.
When the symbiont process dies the following message is broadcast to
the operator console and written to the OPERATOR.LOG file.
%%%%%%%%%%% OPCOM 22-FEB-1996 08:08:14.18 %%%%%%%%%%%
$!Message from user QUEUE_MANAGE on QMUNGR
$!%QMAN-E-SYMDEL, unexpected symbiont process termination
***************
$!%%%%%%%%%%% OPCOM 22-FEB-1996 08:08:14.18 %%%%%%%%%%%
$!Message from user QUEUE_MANAGE on QMUNGR
$!-SYSTEM-F-INSFMEM, insufficient dynamic memory
Problems Addressed in the VAXPRTS01_062 Kit for OpenVMS VAX V5.5-2,
V5.5-2H4, V6.0, V6.1, V6.2:
o LATSYM loops infinitely on queues with RESET modules that do
form feeds. The common symptoms are:
- Queue printing a file forever
- Queue stuck in starting state
- STOP/QUEUE fails to pause queue
- LATSYM symbiont processes looping
Problems Addressed in the VAXPRTS01_061 Kit for OpenVMS VAX V5.5-2,
V5.5-2H4, V6.0 and V6.1:
o The superseded VAXQMAN kits contained both QMAN and PRTSMB
ECOs. This VAXPRTS01_061 ECO kit supersedes only the PRTSMB
portion of those previous kits. The QMAN ECOs have been
separated into the VAXQMAN03_061 kit which only supersedes
the QMAN portion of the superseded VAXQMAN kits.
Problems Addressed in the VAXQMAN02_061 Kit for OpenVMS VAX V6.1, the
VAXQMAN02_060 Kit for OpenVMS VAX V6.0 and in the VAXQMAN8_U2055 Kit for
OpenVMS VAX V5.5-2:
o In the following cases, the print symbiont prints an unwanted
form feed after a print job:
1. Output ends exactly at the end of the page; or
2. A file printed with /PASSALL ends with a form feed.
o PRTSMB or a user-modified symbiont may fail with an ACCVIO at PC=1A45c.
This will cause the print job to hang. The hang occurs because the
librarian routines (LBR$) are called from the AST level.
o Page alignment may be lost in the following cases:
1. When the DCL Command 'START/QUEUE/SEARCH="text_string"' is
used, the print job does not begin printing on the correct
page.
2. If the DCL Command 'START/QUEUE/SEARCH="text_string"' is used
to restart a paused queue, the print job is not re-started on
the page that contains the search text.
3. The DCL Command 'START/QUEUE/BACKWARD=X' does not inherently
resume the print job at the top-of-form. For example, if a
paper jam occurs and the queue is stopped, then the queue is
restarted with the 'START/QUEUE/BACKWARD=5' DCL command and the
paper is at the top-of-form, the printout might begin with the
last line of one page and continue with the next page on the
same sheet of paper.
o Zero length records in FORTRAN Carriage Control files are special
cased by the symbiont. The special case logic does not emulate the
behavior of the symbiont if the explicit carriage control character
code for CR/LF was in the first record and causes an extra line feed
to be printed at the top of the file.
o If a queue is set up with a form other than the default form and a
job is printed using PAGE_SETUP, the printer will continually spew
out paper with only the output from the page setup module. This
continues until the entry is deleted from the queue.
Problems Addressed in the VAXQMAN01_061 Kit for OpenVMS VAX V6.1, the
VAXQMAN01_060 Kit for OpenVMS VAX V6.0 and the VAXQMAN07_U2055 Kit for
OpenVMS VAX V5.5-2:
o When the printing of a FORTRAN CC file is resumed after a 'START/QUEUE'
command is issued, the symbiont may crash and produce a .DMP file.
o A WPS-formatted file may leave the symbiont in a state where
printing a non-WPS file immediately afterwards will cause the
vertical margins on the first page of the non-WPS file to be
incorrect. This only happens if a top margin is defined for the
non-WPS file's form and no flag page is produced between jobs.
o When a modified print symbiont contains a combination of a
user-written input routine and a user-written format routine,
memory leaks occur in the modified print symbiont.
o When a paused or stopped queue which was printing a FORTRAN carriage
control file is restarted with the /TOP_OF_FILE qualifier,
extraneous formatting characters may be sent to the printer device.
This causes an extra form feed to appear.
Problems Addressed in the VAXQMAN01_061 Kit for OpenVMS VAX V6.1 and in
the VAXQMAN07_U2055 Kit for OpenVMS VAX V5.5-2:
o If a file that contains an OSC escape sequence is printed on a LAT
printer and the '/FORM' qualifier is used with the DCL 'PRINT'
command, LATSYM may crash and cause the print job to hang.
Problems Addressed in the VAXQMAN01_060 Kit for OpenVMS VAX V6.0 and in
the VAXQMAN07_U2055 Kit for OpenVMS VAX V5.5-2:
o If the first character of a file to be processed is a CR/FF
(carriage return/form feed) combination, the output of the printer
file may contain many pages of garbage before the expected output
appears.
Problems Addressed in the VAXQMAN01_060 Kit for OpenVMS VAX V6.0:
o Attempts to print a file from a DFS-served disk results in a
NOSUCHOBJECT error.
Problems Addressed in the VAXQMAN06_U2055 Kit for OpenVMS VAX V5.5-2:
o If a user-written or user-modified symbiont calls SMB$INITIALIZE or
PSM$PRINT and uses an invalid maximum stream number, the Queue
Manager may crash.
INSTALLATION NOTES:
In order for the corrections in this kit to take effect, the system must
be rebooted. If the system is a member of a VMScluster, the entire
cluster should be rebooted.
Files on this server are as follows:
|
»vaxprts02_070.README
»vaxprts02_070.CHKSUM
»vaxprts02_070.CVRLET_TXT
»vaxprts02_070.a-dcx_vaxexe
»vaxprts02_070.b-dcx_vaxexe
»vaxprts02_070.c-dcx_vaxexe
»vaxprts02_070.d-dcx_vaxexe
»vaxprts02_070.e-dcx_vaxexe
»vaxprts02_070.f-dcx_vaxexe
|