HP Services Software Patches - vaxmont04_u2055

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 
Copyright (c) Digital Equipment Corporation 1996.  All rights reserved.

PRODUCT:    OpenVMS VAX

COMPONENTS:  MONITOR.EXE
             SPISHR.EXE
             VPM.EXE

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  VAXMONT04_U2055
     ECO Kits Superseded by This ECO Kit:  None
     ECO Kit Approximate Size:  420 Blocks
     Kit Applies To:  OpenVMS VAX V5.5-2, V5.5-2H4, V5.5-2HF
     System/Cluster Reboot Necessary:  Yes

     NOTE:  In order for the images in this remedial kit to execute
            properly, the VAXSHAD09_U2055 remedial kit for OpenVMS VAX
            V5.5-2 must be installed first.  If you have not yet
            installed this kit, for assistance in obtaining the
            VAXSHAD09_U2055 remedial kit please contact your normal
            Digital support channel. 


ECO KIT SUMMARY:

An ECO kit exists for MONITOR, SPISHR, and VPM on OpenVMS VAX V5.5-2,
V5.5-2H4, and V5.5-2HF.  This kit addresses the following problems: 

  o  When the MONITOR command is issued as follows:

          MONITOR IO, PAGE

     or with any other class list, the MONITOR command will fail with a
     remote node exit failure. 

     This problem is corrected in OpenVMS VAX V6.1.


INSTALLATION NOTES:

In order for the corrections in this kit to take effect, the system must
be rebooted.  If the system is a member of a VAXcluster, the entire
cluster should be rebooted. 

NOTE:  In order for the images in this remedial kit to execute properly,
       the VAXSHAD09_U2055 remedial kit for OpenVMS VAX V5.5-2 must be 
       installed first.  If you have not yet installed this kit, for
       assistance in obtaining the VAXSHAD09_U2055 remedial kit please
       contact your normal Digital support channel. 

Files on this server are as follows:

»vaxmont04_u2055.README
»vaxmont04_u2055.CHKSUM
»vaxmont04_u2055.CVRLET_TXT
»vaxmont04_u2055.a-dcx_vaxexe