|
|
 |
PTHREADS-VMS ALPTHREADS_05071 Alpha V7.1 ALPTHREADS/Java JDK ECO Summary
|
TITLE: PTHREADS-VMS ALPTHREADS_05071 Alpha V7.1 ALPTHREADS/Java JDK ECO Summary
Modification Date: 22-SEP-1999
Modification Type: Updated Kit: Supersedes ALPTHREADS_04071
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1998, 1999. All rights reserved.
CAUTION: Application of this update kit exposes a latent race
condition in MMOV V2.0. When the MMOV IVP is run,
MMOV$ALPHAVCR will fall into an infinite loop and
never complete. Users of MMOV should *NOT* install
this update kit.
OP/SYS: OpenVMS Alpha
COMPONENT: PTHREADS
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ALPTHREADS_05071
ECO Kits Superseded by This ECO Kit: ALPTHREADS_04071
ALPTHREADS_03071
ALPTHREADS_02071 (Not released in
TIMA)
ECO Kit Approximate Size: 3366 Blocks
Kit Applies To: OpenVMS Alpha V7.1, V7.1-1H1, V7.1-1H2
System/Cluster Reboot Necessary: Yes
Rolling Re-boot Supported: Yes
Installation Rating: INSTALL_3
3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
**** CAUTION ****
The images provided in this kit will not fully take effect until
the system is rebooted. Compaq strongly recommends that you reboot
your system immediately after installation of this kit. Until a
reboot is performed, the threads environment will be left in an
an inconsistant state and threaded applications will fail with the
following message:
%DCL-W-ACTIMAGE, error activating image CMA$TIS_SHR
-CLI-E-IMGNAME, image file
DKA0:[SYS0.SYSCOMMON.][SYSLIB]CMA$TIS_SHR.EXE
-SYSTEM-F-SHRIDMISMAT, ident mismatch with shareable image
Other cluster nodes that share the same system disk will also need
to be rebooted soon after installing this kit. Until they are, the
threads environments on those nodes will be in an inconsistent
state and threaded applications may fail. Although a rolling
reboot is allowed, other nodes should be rebooted shortly after
installing this kit.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
ALPDCL02_071 or later (if upcalls & multiple kernel threads
are enabled),
ALPBASE02_071 (if upcalls are enabled),
ALPSYSA02_071 or later (if upcalls are enabled)
Differences between ALPPTHR0n_071 and ALPTHREADS_0n071 remedial
kit streams:
ALPPTHR0n_071 - These kits contain remedial fixes to images
shipped with V7.1 only with no new support
and no image identifications incremented.
Images linked against systems with these kits
installed should activate on other V7.1 or
later versions of OpenVMS Alpha.
ALPTHREADS_0n071 - These kits are intended for users who wish
to run Java and they contain new support for
Java. Because of new interdepencies between
two of the images contained in these kits, the
minor image identifications were incremented.
As a result, images linked against Threads
images on systems where these kits have been
installed will require that some flavor of
ALPTHREADS be installed in order to activate
on a V7.1 system. This restriction does not
allow the ALPTHREADS remedial kit to supersede
the ALPPTHR kit.
Installation order for the ALPPTHR and ALPTHREADS remedial kits:
The ALPPTHR kits *cannot* be applied once any ALPTHREADS kit
has been installed on the system. The two kits are incompatible.
Because the ALPTHREADS kits replace all of the threads images (instead
of just a few), the *latest* ALPTHREADS kit can be installed on a
system that has previously installed an ALPPTHR kit. All fixes in
the latest ALPPTHR kit are also contained in the latest ALPTHREADS kit,
so there will be no image regression.
ECO KIT SUMMARY:
An ECO kit exists for DECthreads on OpenVMS Alpha V7.1 through V7.1-1H2.
Problems Addressed in ALPTHREADS_05071 Kit:
o The ALPTHREADS_04071 kit contained a race condition when
upcalls were disabled which could result in a hang with the
manager thread ready to run, but not running. Instead, the
null thread is running. This problem was primarily seen with
Ada programs that used certain TEXT_IO functions, and has been
corrected.
o The DECthreads library was modified to correct a race
condition that could result in reduced performance or
application hangs. The problem occurred when threads
in the READY state would fail to run, due to a missed
wakeup on a quiescent VP.
o When a thread calls pthread_exit() the entire process is
incorrectly terminated by a %CMA-F-EXIT_THREAD error instead
of simply terminating the calling thread.
o Pagefault completions accumulate (as observed via the "pthread
show -u" command to SDA), with the corresponding waiting
threads having been apparently unblocked without consuming
(i.e., freeing) the completions. Also,threads are sometimes
found waiting indefinitely for completions (although this
effect was never successfully reproduced in-house), while
other, mismatched completions remain pending.
o Reduced performance or all process threads hang.
o The PTHREAD$RTL.EXE image produces an UNALIGNRELO warning upon
linking of the image.
Changes Contained in ALPTHREADS_04071 Kit:
o This kit updates the DECthreads environment for OpenVMS Alpha
V7.1[-1Hn] with new support required to run the Java JDK kit.
This support encompasses major structural changes to DECthreads,
including fixes for performance issues.
o Because of new interdependencies between the PTHREAD$RTL and
CMA$TIS_SHR images, the minor idents for both images have been
bumped for this kit. As a result, applications built against
the updated images will NOT run correctly on OpenVMS V7.1
systems unless this kit has been installed. For this reason,
Compaq recommends that applications intended for use on
standard V7.1 systems NOT be built on systems where this kit
has been installed.
o Previous ALPTHREADS_0n071 kits contained a regression where an
incorrect exit status value would be returned by the process or
image exit if any thread explicitly invoked the $EXIT system
service (or the C RTL exit() function) or if the initial thread
terminated by returning an error status value from the program's
"main" function. One effect of this regression is that the
DEC Ada Compilation System (ACS) would always return SS$_NORMAL,
regardless of whether errors were encountered in the compilation
or linking. The regression has been corrected in this kit.
o In previous ALPTHREADS_0n071 kits, the DECthreads bugcheck code
was changed to no longer create the text file PTHREAD_DUMP.LOG,
but instead generate a process dump. Owing to difficulties
analyzing threaded process dumps on some OpenVMS V7.1 systems,
the PTHREAD_DUMP.LOG file has been reinstated for this kit.
Side Effects of installing the ALPTHREADS_04071 Kit:
o Application of this update kit exposes a latent race condition
in MMOV V2.0. When the MMOV IVP is run, MMOV$ALPHAVCR will fall
into an infinite loop and never complete. Users of MMOV should
therefore NOT install this update kit.
Problems addressed in ALPTHREADS_03071:
o This kit updates the DECthreads environment for OpenVMS
Alpha V7.1 with new support required to run the Java JDK
kit. The new support encompasses major structural
changes to DECthreads, including fixes for performance
issues.
o Because of new interdependencies between the PTHREAD$RTL and
CMA$TIS_SHR images, the minor idents for both images have been
bumped for this kit. As a result, threaded applications built
against the updated threads images will NOT run correctly on
standard V7.1 systems. Therefore, Digital recommends that
threaded applications intended for use on V7.1 NOT be built
on systems where this kit has been installed.
INSTALLATION NOTES:
Install this kit with the VMSINSTAL utility by logging into the
SYSTEM account and typing the following at the DCL prompt:
$ @SYS$UPDATE:VMSINSTAL ALPTHREADS_0471 [saveset location]
The saveset location may be a tape drive, CD, or a disk directory
that contains the kit saveset.
The images provided in this kit will not fully take effect until
the system is rebooted. Compaq strongly recommends that you reboot
your system immediately after installation of this kit. Until a
reboot is performed, the threads environment will be left in an
inconsistant state and threaded applications will fail with the
following message:
%DCL-W-ACTIMAGE, error activating image CMA$TIS_SHR
-CLI-E-IMGNAME, image file DKA0:[SYS0.SYSCOMMON.][SYSLIB]CMA$TIS_SHR.EXE
-SYSTEM-F-SHRIDMISMAT, ident mismatch with shareable image
Other cluster nodes that share the same system disk will also need
to be rebooted soon after installing this kit. Until they are, the
threads environments on those nodes will be in an inconsistent
state and threaded applications may fail. Although a rolling
reboot is allowed, other nodes should be rebooted shortly after
installing this kit.
Copyright (c) Compaq Computer Corporation 1998. All rights reserved.
Modification Date: 22-SEP-1999
Modification Type: ARCHIVED
CAUTION: Application of this update kit exposes a latent race condition
in MMOV V2.0. When the MMOV IVP is run, MMOV$ALPHAVCR will fall
into an infinite loop and never complete. Users of MMOV should
therefore NOT install this update kit.
OP/SYS: OpenVMS Alpha
COMPONENT: PTHREADS
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ALPTHREADS_04071
ECO Kits Superseded by This ECO Kit: ALPTHREADS_03071
ALPTHREADS_02071 (Not released in
TIMA)
ECO Kit Approximate Size: 3348 Blocks
Kit Applies To: OpenVMS Alpha V7.1, V7.1-1H1, V7.1-1H2
System/Cluster Reboot Necessary: Yes
Rolling Re-boot Supported: Not Known
Installation Rating: INSTALL_2
2 - To be installed on all systems running
the listed version(s) of OpenVMS and
using the following feature(s):
- Running Java JDK
**** CAUTION ****
The images provided in this kit will not fully take effect until
the system is rebooted. Compaq strongly recommends that you reboot
your system immediately after installation of this kit. Until a
reboot is performed, the threads environment will be left in an
an inconsistant state and threaded applications will fail with the
following message:
%DCL-W-ACTIMAGE, error activating image CMA$TIS_SHR
-CLI-E-IMGNAME, image file
DKA0:[SYS0.SYSCOMMON.][SYSLIB]CMA$TIS_SHR.EXE
-SYSTEM-F-SHRIDMISMAT, ident mismatch with shareable image
Other cluster nodes that share the same system disk will also need
to be rebooted soon after installing this kit. Until they are, the
threads environments on those nodes will be in an inconsistent
state and threaded applications may fail. Although a rolling
reboot is allowed, other nodes should be rebooted shortly after
installing this kit.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
ALPDCL01_071 (if upcalls & multiple kernel threads
are enabled),
ALPBASE02_071 (if upcalls are enabled),
ALPSYSA02_071 (if upcalls are enabled)
Differences between ALPPTHR0n_071 and ALPTHREADS_0n071 remedial
kit streams:
ALPPTHR0n_071 - These kits contain remedial fixes to images
shipped with V7.1 only with no new support
and no image identifications incremented.
Images linked against systems with these kits
installed should activate on other V7.1 or
later versions of OpenVMS Alpha.
ALPTHREADS_0n071 - These kits are intended for users who wish
to run Java and they contain new support for
Java. Because of new interdepencies between
two of the images contained in these kits, the
minor image identifications were incremented.
As a result, images linked against Threads
images on systems where these kits have been
installed will require that some flavor of
ALPTHREADS be installed in order to activate
on a V7.1 system. This restriction does not
allow the ALPTHREADS remedial kit to supersede
the ALPPTHR kit.
Installation order for the ALPPTHR and ALPTHREADS remedial kits:
The ALPPTHR kits *cannot* be applied once any ALPTHREADS kit
has been installed on the system. The two kits are incompatible.
Because the ALPTHREADS kits replace all of the threads images (instead
of just a few), the *latest* ALPTHREADS kit can be installed on a
system that has previously installed an ALPPTHR kit. All fixes in
the latest ALPPTHR kit are also contained in the latest ALPTHREADS kit,
so there will be no image regression.
ECO KIT SUMMARY:
An ECO kit exists for Java JDK Support for DECThreads on OpenVMS
Alpha V7.1 through V7.1-1H2.
Changes Contained in ALPTHREADS_04071 Kit:
o This kit updates the DECthreads environment for OpenVMS Alpha
V7.1[-1Hn] with new support required to run the Java JDK kit.
This support encompasses major structural changes to DECthreads,
including fixes for performance issues.
o Because of new interdependencies between the PTHREAD$RTL and
CMA$TIS_SHR images, the minor idents for both images have been
bumped for this kit. As a result, applications built against
the updated images will NOT run correctly on OpenVMS V7.1
systems unless this kit has been installed. For this reason,
Compaq recommends that applications intended for use on
standard V7.1 systems NOT be built on systems where this kit
has been installed.
o Previous ALPTHREADS_0n071 kits contained a regression where an
incorrect exit status value would be returned by the process or
image exit if any thread explicitly invoked the $EXIT system
service (or the C RTL exit() function) or if the initial thread
terminated by returning an error status value from the program's
"main" function. One effect of this regression is that the
DEC Ada Compilation System (ACS) would always return SS$_NORMAL,
regardless of whether errors were encountered in the compilation
or linking. The regression has been corrected in this kit.
o In previous ALPTHREADS_0n071 kits, the DECthreads bugcheck code
was changed to no longer create the text file PTHREAD_DUMP.LOG,
but instead generate a process dump. Owing to difficulties
analyzing threaded process dumps on some OpenVMS V7.1 systems,
the PTHREAD_DUMP.LOG file has been reinstated for this kit.
Side Effects of installing the ALPTHREADS_04071 Kit:
o Application of this update kit exposes a latent race condition
in MMOV V2.0. When the MMOV IVP is run, MMOV$ALPHAVCR will fall
into an infinite loop and never complete. Users of MMOV should
therefore NOT install this update kit.
Problems addressed in ALPTHREADS_03071:
o This kit updates the DECthreads environment for OpenVMS
Alpha V7.1 with new support required to run the Java JDK
kit. The new support encompasses major structural
changes to DECthreads, including fixes for performance
issues.
o Because of new interdependencies between the PTHREAD$RTL and
CMA$TIS_SHR images, the minor idents for both images have been
bumped for this kit. As a result, threaded applications built
against the updated threads images will NOT run correctly on
standard V7.1 systems. Therefore, Digital recommends that
threaded applications intended for use on V7.1 NOT be built
on systems where this kit has been installed.
INSTALLATION NOTES:
Install this kit with the VMSINSTAL utility by logging into the
SYSTEM account and typing the following at the DCL prompt:
$ @SYS$UPDATE:VMSINSTAL ALPTHREADS_0471 [saveset location]
The saveset location can be a tape drive or a disk directory that
contains the kit saveset. Note that the installation will require
a minimum of 10000 free blocks on the system disk. Much of this
space is needed only during the installation as system libraries
are being updated. Space can be recovered after installation by
purging the system disk to remove files that are replaced by the
installation procedure.
The system should be rebooted after the successful
installation of the update kit. If you have other nodes
in your OpenVMS Cluster sharing a common system disk, they
should also be rebooted in order make use of the new
images.
|
Files on this server are as follows:
|
»alpthreads_05071.README
»alpthreads_05071.CHKSUM
»alpthreads_05071.CVRLET_TXT
»alpthreads_05071.a-dcx_axpexe
»alpthreads_05071.CVRLET_TXT
|
