|
|
OpenVMS ALPDISM01_071 Alpha V7.1 DISMNTSHR ECO Summary
|
TITLE: OpenVMS ALPDISM01_071 Alpha V7.1 DISMNTSHR ECO Summary
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1998. All rights reserved.
Modification Date: 26-FEB-1999
Modification Type: Dependent kit ALPMOUN05_071 has been superseded by
ALPMOUN06_071.
NOTE: The documentation for this kit calls out a dependency on the
ALPMOUN05_071 remedial kit. This MOUNT kit has been superseded
by ALPMOUN06_071.
Modification Date: 22-DEC-1998
Modification Type: Modified Installation Rating from "1" to "2".
PRODUCT: OpenVMS Alpha
COMPONENT: DISMNTSHR.EXE
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ALPDISM01_071
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 252 Blocks
Saveset A - 252 Blocks
Kit Applies To: OpenVMS Alpha V7.1, V7.1-1H1, V7.1-1H2
System/Cluster Reboot Necessary: No
Installation Rating: INSTALL_2
2 - To be installed on all systems running
the listed version(s) of OpenVMS and
using the following feature(s):
Host-based RAID and MME
ECO KIT SUMMARY:
An ECO kit exists for DISMOUNT on OpenVMS Alpha V7.1 through V7.1-1H2.
This kit addresses the following problems:
o A possible system crash occurs during Host Based RAID Unbinds
with MME code enabled. A mailbox read synchronization problem
causes the crash.
This problem only occurs when a host-based RAID UNBIND command
is done while an MME-based application is running.
This problem may occur in several different code areas of the
operating system. In order to eliminate all known instances of
this problem, the following remedial kits (or their supersedants)
will also need to be installed:
ALPSYSA02_071 ALPBACK03_071 ALPINIT01_071 ALPMOUN05_071
ALPMTAA01_071
INSTALLATION NOTES:
The system does not need to be rebooted after this kit is installed.
However, if you have other nodes in your OpenVMS VMScluster, they
should be rebooted or you should install this kit on each system in
order to make use of the new image(s).
Files on this server are as follows:
|
»alpdism01_071.README
»alpdism01_071.CHKSUM
»alpdism01_071.CVRLET_TXT
»alpdism01_071.a-dcx_axpexe
|