DOCUMENT:Q195747 13-JUN-2001 [sna] TITLE :Implicit Incoming LU Not Used After Saving Configuration Change PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,4.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1 ------------------------------------------------------------------------------- SYMPTOMS ======== A connection that has been working fine using the Implicit Incoming Remote LU feature may fail after a change is made to the SNA Server configuration. The failure appears as a negative response to a BIND sent by the host. The negative response will include sense code 0835 (Invalid Parameter). The pointer in the sense code points to the Network Qualified PLU Network Name Structured Data Subfield in the BIND. CAUSE ===== For the problem to occur, the following must be true: - There is more than one Remote APPC LU in the subdomain with the same alias. - This alias must match that which is configured in the "Implicit Incoming Remote LU" field in the Local APPC LU advanced properties. If both of these criteria are true, after an APPC Local or Remote LU is created or deleted, when saving the new configuration, SNA Server Manager picks the first Remote LU it finds with that name (which may reside on a different server). After this has happened, if SNA Server receives a BIND containing a partner LU name that is not recognized, the BIND will be rejected. RESOLUTION ========== SNA Server 3.0 -------------- To resolve this problem, obtain the latest service pack for SNA Server version 3.0. For additional information, please see the following article in the Microsoft Knowledge Base: Q184307 How to Obtain the Latest SNA Server Version 3.0 Service Pack SNA Server 4.0 -------------- This problem was corrected in the latest Microsoft SNA Server version 4.0 U.S. Service Pack. For information on obtaining this Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K STATUS ====== Microsoft has confirmed this to be a problem in SNA Server versions 3.0, 3.0 Service Pack 1, 3.0 Service Pack 2, 3.0 Service Pack 3, 4.0, and 4.0 Service Pack 1. This problem was first corrected in SNA Server 3.0 Service Pack 4. MORE INFORMATION ================ The following is an excerpt from a trace showing the problem. In the bind, the Network Qualified PLU Network Name Structured Data Subfield starts at byte 43(h), noted by the ^ mark (byte 0 of the BIND follows the request header, and has a value of 31): DLC 05160000->01020101 DLC DATA DLC DAF:01 OAF:02 ODAI:off Exp. DLC BIND RQD SC FI BC EC DR1 DLC DLC ---- Header at address 01464418, 1 elements ---- DLC 04010004 10112D00 01024286 0100E800 <......-...Bf..Y.> DLC DLC ---- Element at address 0195E230, start 10, end 147 ---- DLC 6B800031 001307B0 B050B300 87898987 DLC 00060200 00000000 00001023 00000FD9 <...........#...R> DLC C5C4C5E2 D74BD5F0 F3E2E5F0 F0F22600 DLC 0902E2D5 C1E2E5C3 D4C70903 01A70860 <..SNASVCMG...x.`> DLC 6FE43B4C 1004D9C5 C4C5E2D7 4BD5F0F3
^^
DLC E2E5F0F0 F2000FD9 C5C4C5E2 D74BE3F0 DLC C5C4F2F3 C9F26016 ECA70860 6FE43B4C DLC 0DD9C5C4 C5E2D74B C3C4D9C1 C3C12C0A <.REDESPKCDRACA,.> DLC 01084040 40404040 4040 <..@@@@@@@@ >

The LU name in the subfield is REDESP.N03SV002, however there is no LU by this name in the SNA Server config. When an Implicit Incoming Remote LU is configured, SNA Server should treat the BIND as if it contained the Implicit LU name in this field. In the problem scenario, SNA Server sent a negative response as follows:

DLC 01020101->05160000 DLC DATA DLC DAF:02 OAF:01 ODAI:off Exp. DLC BIND -RSP SC FI SD BC EC DR1 DLC DLC ---- Header at address 01464418, 1 elements ---- DLC 04010004 10002D00 02014286 0100E800 <......-...Bf..Y.> DLC DLC ---- Element at address 0195E59C, start 10, end 17 ---- DLC EF900008 35004331 <....5.C1 > Additional query words: ====================================================================== Keywords : Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ400 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ300SP2 Version : WINDOWS:3.0,4.0 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.