DOCUMENT:Q195168  25-OCT-2001  [sna]
TITLE   :SNACFG Doesn't Output Complete Data for the ADDPARTNER Option
PRODUCT :Microsoft SNA Server
PROD/VER::3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1 
-------------------------------------------------------------------------------


SYMPTOMS
========

The ADDPARTNER option may not display all of its available information when an
output file is created using the SNACFG /PRINT command.

In the output file, you may see line similar to the following:

APPCLLU LOCALLU

   /ADDPARTNER:REMOTELU,#INTER,HOSTCONN

When multiple local Advanced Program-to-Program Communications (APPC) logical
units (Lus) with the same alias name are configured on several SNA Servers
within the same SNA subdomain, SNA Server uses the first instance of the local
APPC LU alias it finds. In these cases, SNACFG fails to add the following
instances of the partner APPC LUs when used to configure SNA Servers in
unattended mode.

CAUSE
=====

This problem appears since the Server name is not added to the output file. To
support the multinode functionality introduced with SNA Server 4.0, the instance
of the Node (SNA Server Service) needs to be added as well.

With the corrected version, the Server name and Node name are now added
correctly.

RESOLUTION
==========

SNA Server 3.0
--------------

To resolve this problem, obtain the latest service pack for SNA Server version
3.0. For additional information, please see the following article in the
Microsoft Knowledge Base:

   Q184307 How to Obtain the Latest SNA Server Version 3.0 Service Pack



SNA Server 4.0
--------------

This problem was corrected in the latest SNA Server version 4.0 U.S. Service
Pack. For information on obtaining this Service Pack, query on the following
word in the Microsoft Knowledge Base (without the spaces):

   S E R V P A C K


WORKAROUND
==========

To work around the problem, you need to add the Server name and Node name in the
output file as shown below:

APPCLLU LOCALLU Server\Node

   /ADDPARTNER:REMOTELU,#INTER,HOSTCONN

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft SNA Server version
3.0, 3.0 Service Pack 1, 3.0 Service Pack 2, 3.0 Service Pack 3, 4.0, and 4.0
Service Pack 1. This problem was first corrected in SNA Server 3.0 Service Pack
4.

Additional query words: SNACFG ADDPARTNER APPCLLU

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ400 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ300SP2
Version           : :3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.