DOCUMENT:Q181025 07-SEP-2001 [sna] TITLE :Print Server Doesn't Support Vertical Channel Select SCS Code PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 OPER/SYS: KEYWORDS:kbprint ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== Print Server does not support the Vertical Channel Select(VCS) SCS code (X'04 xx'). When Print Server receives a VCS command in the datastream, it does an LF (Line Feed, X'25') instead. STATUS ====== Microsoft has confirmed this to be a problem in SNA Server versions 3.0, 3.0 SP1, 3.0 SP2 and 4.0. This problem was corrected in the latest SNA Server versions 3.0 and 4.0 U.S. Service Packs. For information on obtaining these Service Packs, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K MORE INFORMATION ================ With the fix applied, the Ppd3270.dll file is changed so that it recognizes the VCS command and handles it appropriately. In one scenario, a Host was sending down the following SCS sequence: 2B C2 05 62 01 62 0B This is a Set Vertical Format command, with the following parameters: 05 - length of data 01 - top margin 62 - bottom margin 0B - set vertical tab stop to line 11 The Host then sent down the following: 04 82 This is a Vertical Channel Select command (04), selecting vertical channel 2 (82). Vertical channel 1 is always the top margin and vertical channel 2 is the first vertical tab stop as defined in the Set Vertical Format command above (that is, line 11). Print Server processes this command by issuing 1 line feed, but it should issue 10 line feeds (to get to line 11. This can be clearly seen with extended job tracing turned on: s3pr1dat.c(313) byte: 04 -> LF/VCS s3prdscs.c(61) ******* FLUSH DATA ********** winvprtj.c(4725) LF - MOVE PAGE POSITION DOWN A LINE LINE s3prdscs.c(42) ******* PARSE DATA ********** s3pr1dat.c(2182) byte: 82 -> second byte of VCS - ignore Printserver is ignoring the '82.' Additional query words: ====================================================================== Keywords : kbprint Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ400 kbSNAServ300SP1 kbSNAServ300SP2 Version : WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.