DOCUMENT:Q172799 25-OCT-2000 [sna] TITLE :Extra Form Feed Printed With LU3 Print Job PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,3.0 SP1 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1, on platform(s): - the operating system: Microsoft Windows NT ------------------------------------------------------------------------------- SYMPTOMS ======== When you print an LU3 host print job through Microsoft SNA Server, an extra form feed occurs after the job is printed. CAUSE ===== The host was sending the following characters at the end of the print job: 0C 0D 19 *or* 0C 19 where: 0C = form feed (FF) 0D = carriage return (CR) 19 = end of medium/end of message (EM) Both FF and EM were resulting in form feeds, causing an extra form feed to occur. RESOLUTION ========== To correct this problem, a PDF file can be used which eliminates the form feed sent at the end of the print job. To configure this, follow these steps: 1. Copy the default \System\Hplj2.pdf file to Noff.pdf (or whatever name you wish). 2. Edit the Noff.pdf file and change the END_JOB entry to read as follows: END_JOB = CUL CBP CS1 The default is "END_JOB = CUL CBP CS1 FFF", where FFF = form feed. 3. Compile the Noff.pdf file as follows: PDFCOMP NOFF.PDF NOFF.PDT 4. Configure the SNA Print Server session to use the PDT file using SNA Manager. To do this, choose the Print Server session property page, and focus on the Overrides folder. At the bottom of this folder, choose the following: [X] PDF C:\sna\system\noff.pdt and click OK. 5. Save the configuration file, Noff.pdf, then stop and start the SNA Print Server. STATUS ====== Microsoft has confirmed this to be a problem in the Microsoft products that are listed at the beginning of this article. Microsoft is researching this problem and will post more information here in the Microsoft Knowledge Base when it becomes available. Additional query words: ====================================================================== Keywords : Technology : kbAudDeveloper kbSNAServSearch Version : WINDOWS:3.0,3.0 SP1 Issue type : kbbug ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.