DOCUMENT:Q172643 02-APR-2000 [sna] TITLE :Port Values for TN5250 Don't Work If One Is Set to Use Default PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,3.0 SP1 OPER/SYS: KEYWORDS:kbnetwork ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1 ------------------------------------------------------------------------------- SYMPTOMS ======== When you are setting the port numbers for AS/400 definitions, if multiple ports are used and one is left at Use Default, all ports will connect to the AS/400 with the definition set to Use Default. This port setting is found in the TN5250 AS/400 Definition on the Terminal Types property page in SNA Server Manager. For example, set up two AS/400 definitions with definition A set to use port 24 and definition B set to Use Default in the port setting. When a TN5250 client initiates a session, it will go to AS/400 definition B with the Use Default port setting, even if assigned to AS/400 definition A. CAUSE ===== When determining which AS/400 definition the TN5250 client was assigned to, a check by TN5250.EXE finds a default port entered in an AS/400 definition and erroneously assigns all clients to the default setting. RESOLUTION ========== TN5250.EXE has been modified to assign the proper AS/400 definition to the client requesting a session when a "Use Default" port setting exists in any TN5250 AS/400 definition. STATUS ====== Microsoft has confirmed this to be a problem in SNA Server versions 3.0 and 3.0 Service Pack 1 (SP1). This problem was corrected in the latest SNA Server version 3.0 U.S. Service Pack. For information on obtaining this Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K Additional query words: ====================================================================== Keywords : kbnetwork Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ300SP1 Version : WINDOWS:3.0,3.0 SP1 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.