DOCUMENT:Q166160 13-AUG-2002 [winnt] TITLE :Stop C000021a after Applying Windows NT 4.0 Service Pack PRODUCT :Microsoft Windows NT PROD/VER::4.0 OPER/SYS: KEYWORDS:kbsetup ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 4.0 - Microsoft Windows NT Server version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== After you apply a service pack for Windows NT 4.0, the computer may stop with the following error message on the subsequent restart: Stop: c000021a {Fatal System Error} The session manager initialization system process terminated unexpectedly with a status of 0xc0000005 (0x00000000, 0x0000000) NOTE: The parameters in parenthesis are specific to your system configuration and may differ each time. -or- After you install a Windows NT 4.0 service pack, the system restarts at the blue kernel screen without an error message and continues in a restart loop. CAUSE ===== This can be caused by a corrupt Windows NT system file, or where one or more Windows NT system files, which are in use, may not be copied properly while applying a service pack. On Compaq servers that are running Compaq's Insight Manager, the service pack update program would display a message that the file Ntdll.dll was busy. If you skipped the copy of this file and continued the installation, the system will exhibit one of the above symptoms on start up. RESOLUTION ========== You resolve this problem by performing one of the following: - If the system files are on a FAT partition, boot to an MS-DOS bootable floppy disk and replace Ntdll.dll with the updated version from Windows NT 4.0 Service Pack 2. - Replace Ntdll.dll with the updated version from Service Pack 2 by modifying the Setup.log file on the Emergency Repair Disk (ERD). For more information, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q164471 TITLE : Replacing System Files Using a Modified Emergency Repair Disk - Copy the Setupdd.sys file from Service Pack 2 to the second Windows NT Setup disk, run an Emergency Repair, select the option to "Verify Windows NT System files", and then choose to replace the Ntdll.dll file. - If the system files are on an NTFS partition, install a parallel copy of Windows NT and replace Ntdll.dll in the original folder with the updated version from Service Pack 2. MORE INFORMATION ================ NOTE: There are other causes for Stop: 0xC000021a as listed below: For more information, please refer to the following Microsoft Knowledge Base articles: ARTICLE-ID: Q160658 TITLE : Stop C000021A Using MoveFileEx MOVEFILE_DELAY_UNTIL_REBOOT ARTICLE-ID: Q139843 TITLE : Recovering from STOP 21a Caused by Disk Mirror Sets Additional query words: Stop 0xc000021a ntdll.dll ====================================================================== Keywords : kbsetup Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : :4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.