DOCUMENT:Q162804 10-AUG-2001 [winnt] TITLE :STOP 0x00000079 After Applying Windows NT 4.0 Post-SP2 KRNL Fix PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 4.0 - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Server version 4.0, Terminal Server Edition ------------------------------------------------------------------------------- SYMPTOMS ======== On a multiprocessor system, after you apply the Windows NT 4.0 Post-SP2 (Service Pack 2) KRNL-FIX (Krnl40x.exe, where x is the processor type) the system will display a STOP error message: STOP: 0x00000079 (0x00000002 0x00000002 0x00000000 0x00000000) CAUSE ===== This error is a mismatched HAL STOP error message. It is caused by applying the single processor Ntoskrnl.exe, rather than using the Ntkrnlmp.exe file, which needs to be renamed to Ntoskrnl.exe before the fix is applied. The README file from the fix includes this information: Note: If the target computer is a multiprocessor system, then perform the following command in order to replace the uniprocessor version of the kernel with the multiprocessor version. This step must not be done if the target computer is a uniprocessor system. Copy NTKRNLMP.EXE NTOSKRNL.EXE To install this hotfix, put the new Ntoskrnl.exe, hotfix.exe, and hotfix.ini in the same (temporary) directory, and then type: "hotfix /install" (without the quotation marks) After installation, type "hotfix" (without the quotation marks) to verify that it was installed correctly, then perform a reboot the system. RESOLUTION ========== To correct this problem, do one of the following: - If Windows NT is installed on a FAT partition, replace Ntoskrnl.exe in the %SystemRoot%\System32 directory with the Ntkrnlmp.exe from the Post-SP2 KRNL-FIX. In the %SystemRoot%\System32 directory, rename Ntkrnlmp.exe to Ntoskrnl.exe. Reboot the computer and restart Windows NT. -OR- - Use the following KB article to modify your ERD diskette to replace the Single processor kernel with the Muliprocessor kernel. ARTICLE ID: Q164471 TITLED : Replacing System Files Using a Modified Emergency Repair Disk -OR- - If Windows NT is installed on an NTFS partition, re-install Windows NT to a separate directory (parallel installation). Boot into this new installation. Go to the original Windows NT %SystemRoot%\System32 directory and replace Ntoskrnl.exe with the Ntkrnlmp.exe from the Post- SP2 KRNL-FIX. In the %SystemRoot%\System32 directory, rename Ntkrnlmp.exe to Ntoskrnl.exe. Reboot the computer and restart Windows NT, starting into the original version of Windows NT. If the original version now starts properly, the "parallel installation" can be deleted. This can be done using Explorer, File Manager or My Computer. WARNING: Use caution when deleting operating system subdirectories or modifying the Boot.ini. Delete ONLY the Windows NT directory that was created for the parallel installation; do NOT delete the original installation. In addition, the Boot.ini can be modified to remove references to this now non-existent version of Windows NT. If the parallel installation was installed to a directory called Winnt.bak, delete only those lines in Boot.ini that have Winnt.bak. Also, make sure that the "DEFAULT=" entry is directed back to the ARC path and directory for the original installation of Windows NT. For additional information on the Boot.ini file, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q102873 TITLE : BOOT.INI and ARC Path Naming Conventions and Usage Additional query words: 0x79 SP2 hotfix ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch Version : winnt:4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.