DOCUMENT:Q162686 08-AUG-2001 [winnt] TITLE :Problems with Incorrect #9FX Reality 332 Video Card PRODUCT :Microsoft Windows NT PROD/VER:WINNT:3.51 OPER/SYS: KEYWORDS:kbdisplay kbhw kbHardware ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 3.51 - Microsoft Windows NT Server version 3.51 ------------------------------------------------------------------------------- SYMPTOMS ======== After applying any service pack to a computer outfitted with a #9FX Reality 332 video card that requires a third-party driver, the computer restarts to a black screen and stops responding. This will also happen if an Emergency Repair Disk (ERD) is run against the computer for repair purposes. Starting the computer to VGA mode allows the computer to start; however, using the Last Known Good Configuration will not. Some Dell Dimensions XPS Pro 200 computers come with this video card, and exhibit this problem. The problem occurs if both of the following conditions are true: - Windows NT 3.51 was initially installed using the third-party video driver. - The video card is set for at least 1280 X 768 resolution and 256 colors. CAUSE ===== The #9FX Reality 332 video card is based on the S3 chipset and uses a set of drivers with the same name as the standard S3 compatible video card; S3.sys and S3.dll. However, the drivers that come with Windows NT 3.51 and its service packs are not 100 percent compatible with this video adapter. When applying the service pack or running an ERD, these files are replaced by the standard S3 drivers, which cause the computer to fail. When Windows NT 3.51 is preinstalled by the manufacturer, the standard S3 driver is not used. The Last Known Good startup option does not work because the last successful restart included drivers with the same name as the failed attempt. RESOLUTION ========== To resolve this problem, perform the following steps: 1. Obtain the correct drivers from Number Nine Visual Technology. You can obtain these drivers by connecting to http://www.nine.com/drivers.html and downloading the 325n3009.exe file. 2. Start the computer to VGA mode. 3. Install the newer drivers. MORE INFORMATION ================ The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: prodnt hang hung freeze frozen chip set ====================================================================== Keywords : kbdisplay kbhw kbHardware Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS351search Version : WINNT:3.51 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.