DOCUMENT:Q154103  13-JUN-2001  [sna]
TITLE   :Cannot Access Shared Folders with CA/400
PRODUCT :Microsoft SNA Server
PROD/VER:WINDOWS:2.1,2.11,2.11 SP1
OPER/SYS:
KEYWORDS:kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, versions 2.1, 2.11, 2.11 SP1, on platform(s):
    - the operating system: Microsoft Windows NT 
-------------------------------------------------------------------------------


SYMPTOMS
========

When you use the IBM CA/400 client, and if Shared Folders is configured to
automatically create a mapped drive to the AS/400, the conversation ends
abnormally. The Shared Folders will not be available through File Manager.

If the drive letter is manually assigned in Shared Folders and the window is
minimized, the Shared Folders can be accessed. However, if you close the Shared
Folders application, the drive is lost.

CAUSE
=====

In order to support IBM Client Access Shared Folders, the SNA Server Windows 3.x
client must allow shared folders to share an APPC conversation and TCP/IP socket
handle between different Windows tasks, which is not normally supported by
Windows APPC or the Windows sockets interface. However, the SNA Server Windows
3.x client software treats CA/400 Shared Folders as a special application;
however it was not handling all conditions properly.

To prevent a Shared Folders drive from being shut down, verify that the following
line is in the WIN.INI file:

   CA400SHAREDFOLDERS=YES

Then add a new parameter called PersistentTasks under the [WNAP] section:

   [WNAP]
   PersistentTasks=WSTRPCS SFANSW

NOTE: The WSTRPCS parameter takes care of automatically mapping the connections,
and the SFANSW parameter resolves the issue with closing the CA/400 Folders
dialog box without losing the drives you created.

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft SNA Server version
2.11.sp1. This problem was corrected in the latest Microsoft SNA Server 2.11
U.S. Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):

   S E R V P A C K

Additional query words: prodsna sp1

======================================================================
Keywords          : kbnetwork 
Technology        : kbAudDeveloper kbSNAServSearch
Version           : WINDOWS:2.1,2.11,2.11 SP1
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.