DOCUMENT:Q150198 08-AUG-2001 [winnt] TITLE :Bus Contention and PCI, EISA, and ISA PRODUCT :Microsoft Windows NT PROD/VER::3.5,3.51 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Advanced Server, versions 3.5, 3.51 - Microsoft Windows NT Workstation versions 3.5, 3.51 ------------------------------------------------------------------------------- SYMPTOMS ======== If you run a nightly backup of your system and during that period of time you get network disconnect errors in the event log, it is very likely that you are encountering bus contention between your network card and the SCSI controller that may be hosting your tape backup unit. Because SCSI controllers are most often involved in this type of issue, this article focuses on SCSI, but bus contention can potentially affect the function of any card or built-in accessory port in the system including mice, video, keyboard, and any other I/O system. MORE INFORMATION ================ There are hardware issues that occur rarely and are on the surface indistinguishable from software-based problems. These issues most often occur when there are a number of same function cards in a given computer. For example a given hardware platform has several different SCSI cards in the system, one or more in the slots and perhaps an onboard (built-in) SCSI controller in some of the more modern boards. This can occur with any group of cards in a multi-interface system board (any combination of PCI, EISA and ISA). WORKAROUND ========== The best test (and potential workaround) for this problem is to choose an ISA board to replace your PCI (or EISA) board's function (for example, replace a PCI network card with an ISA network card) and see whether the problem ceases. If substituting the ISA board eliminates the problem, you may want to contact your various hardware vendors to investigate why and where this conflict is occurring if you want to continue to use the card in question. An alternative is to simplify your setup. For example, you could place your tape unit on the onboard SCSI chain and eliminate one of the extra SCSI controllers. This issue should not occur in an all-ISA or all-EISA configuration. Although with the ISA configuration you will have the familiar problem of I/O address as IRQ conflict resolution, most of these conflicts are self-evident. Additional query words: prodnt ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTAdvSerSearch kbWinNTAdvServ351 kbWinNTAdvServ350 Version : :3.5,3.51 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.