DOCUMENT:Q142052 08-AUG-2001 [winnt] TITLE :RAS Clients Using TCP/IP Can Access All Subnets But Their Own PRODUCT :Microsoft Windows NT PROD/VER:WINDOWS:95; winnt:3.5,3.51,4.0 OPER/SYS: KEYWORDS:kbnetwork dun win95 win98 win98se kbDialUp ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 - Microsoft Windows 95 - Microsoft Windows 98 - Microsoft Windows 98 Second Edition ------------------------------------------------------------------------------- SYMPTOMS ======== Your Windows NT or Windows 95/98 Remote Access (RAS) client whose network interface card (NIC) is disconnected from the local area network (LAN), cannot access its subnet after dialing the RAS server that is on the same subnet as the RAS client IP address even though the RAS client is also using the TCP/IP protocol. This problem does not occur on non-subneted networks. CAUSE ===== Destination IP addresses that are on the same subnet as the client network card are always sent out over the NIC, even if the NIC is no longer connected to the LAN. Windows NT and Windows 95/98 will automatically build a route table for the use of the workstation. This route table will control the sending of TCP/IP packets over the network card on the LAN or RAS interface. RESOLUTION ========== Windows NT 3.x -------------- 1. Type "route print" from the command prompt. The following is a sample route table that appears for the route print command: Active Routes: Network Address Netmask Gateway Address Interface Metric

0.0.0.0 0.0.0.0 157.57.24.1 157.57.24.194 2 0.0.0.0 0.0.0.0 157.54.24.66 157.54.24.66 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 157.54.0.0 255.255.0.0 157.54.24.66 157.54.24.66 1 157.54.24.66 255.255.255.255 127.0.0.1 127.0.0.1 1 157.57.24.0 255.255.248.0 157.57.24.194 157.57.24.194 2 157.57.24.194 255.255.255.255 127.0.0.1 127.0.0.1 1 157.57.255.255 255.255.255.255 157.57.24.194 157.57.24.194 1 224.0.0.0 224.0.0.0 157.54.24.66 157.54.24.66 1 224.0.0.0 224.0.0.0 157.57.24.194 157.57.24.194 1 255.255.255.255 255.255.255.255 157.57.24.194 157.57.24.194 1 2. Find your subnet address in the "Network Address" column. This Route will have your subnet address in the "Mask" column and the IP address of your Network card in the "Gateway" and "Interface" column. 3. Type "route delete xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is your subnet address. In this example it would be "route delete 157.57.24.0". This route will automatically be re-added at reboot. Now all packets will be sent over the RAS interface. Windows NT 4.0 -------------- To fix this problem on Windows NT 4.0 requires the use of a network disabled profile: 1. Open Control Panel, System, Hardware Profiles. 2. Choose Copy, name this profile No Netcard Profile. 3. Choose Properties for this profile, then select the Network tab and check Network Disabled Hardware Profile. When you boot up the machine and you are not connected to the Local Area Network (LAN), choose the "No Netcard profile" profile. Windows 95/98 ------------- Windows allows you to create multiple hardware profiles. A hardware profile without a NIC should be used when the NIC is not connected to the LAN and you are using RAS. This method also removes a route, as in the example above, but is more convenient. 1. Right click on "My Computer", then go to "Properties". 2. Choose "Hardware Profiles" and copy the current configuration. 3. Name the new configuration "Remote" or similar. 4. Click the "Device Manager" tab and under "Network Adapters" double click on your network card. 5. Uncheck the box next to the name of your new boot option. STATUS ====== Microsoft has confirmed this to be a problem in Windows NT version 3.5x and Windows 95. Additional query words: prodnt 95ping request timed out error 53 combo card the route specified was not found ====================================================================== Keywords : kbnetwork dun win95 win98 win98se kbDialUp Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search kbWin95search kbWin98search kbWin98SEsearch kbZNotKeyword3 kbWin98 kbWin98SE Version : WINDOWS:95; winnt:3.5,3.51,4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.