DOCUMENT:Q138258 06-AUG-2002 [winnt] TITLE :Windows NT Debug Symbol Setup Information PRODUCT :Microsoft Windows NT PROD/VER::3.1,3.5,3.51,4.0 OPER/SYS: KEYWORDS:kbusage ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server versions 3.1, 3.5, 3.51, 4.0 - Microsoft Windows NT Workstation versions 3.1, 3.5, 3.51, 4.0 - Microsoft Windows NT Advanced Server ------------------------------------------------------------------------------- SUMMARY ======= This article provides detailed information on how to set up Microsoft Windows NT Symbol Trees, as well as advanced setup tips and tricks. MORE INFORMATION ================ Article Contents ---------------- - General Information - Setting up Custom Symbol Trees - Single Processor vs. Multi Processor - Custom HAL.DLL - Using Symbols in Debugger - Verifying the Symbols - Advanced Symbol Verification - Checked Versions General Information ------------------- Debug Symbol files (symbols) are required to do both kernel and user-mode debugging in Windows NT. Symbols provide a way to reference global variables and function names in the loaded executable. Symbols are produced by the linker. They are stripped out of retail product and saved in a separate (.DBG) file. This considerably reduces file size which decreases file load time and thus increases system performance. It also reduces the number of install floppies. Symbols represent Function/API names and global variables. The .DBG File contains symbolic information for each file. They can be found on the installation CD-ROM in \Support\Debug\[i386 | mips]\Symbols. They can also be found on the NT build server. The location is \\Ntbuilds\Release\Usa\Build###\[x86 | mips |alpha]\Fre.srv\symbols. The Symbols directory is divided up into seven subdirectories, called Extension Subdirectories (note that many of the symbol files in these directories are User mode): COM - symbols for all files ending in .COM go here CPL - symbols for all files ending in .CPL go here. DLL - symbols for all files ending in .DLL go here DRV - symbols for all files ending in .DRV go here EXE - symbols for all files ending in .EXE go here SCR - symbols for all files ending in .SCR go here SYS - symbols for all files ending in .SYS go here. Symbols must match file versions: Symbols from a different build give erroneous information and send developers chasing shadows and waste considerable time. Double check with the customer what build the customer is running and if the customer has any patches installed. The Kernel Stop Screen displays the build number of the kernel. Patched Builds: Patched builds such as Service Packs require a special set of symbols, that is a combination of the base build and the patched symbols. Setting Up Custom Symbol Trees ------------------------------ Remember that symbols must match the files installed on a customer's computer. You often have to create a custom set of symbols just for a particular customer. NOTE: Complete Symbol Trees can take up over 30 MB of disk space. 1. Create a subdirectory to store your customer symbol set. For example: C:\MYSYMBOLS 2. Always start with the base Windows NT version number. Copy the following files from the installation CD-ROM for the appropriate version: " XCOPY [CD Drive]\SUPPORT\DEBUG\I386 C:\MYSYMBOLS /S. " (without the quotation marks) 3. Copy symbols for the appropriate Service Pack binary files over your custom tree. Service Pack symbols can be found on the servers listed in the section below titled "Symbol Locations." 4. Copy any third-party patches such as Compaq SSD symbols over to your custom symbol tree. You may need to get these symbols from the vendor. NOTE: Steps 3 and 4 may need to be reversed depending on the order that they were installed by the customer. Match the customer's steps. 5. If the server has hotfixes installed, you need to obtain the matching symbol for that hotfix. If a symbol file is not provided with the hotfix, you need to contact Microsoft Product Support Services to inquire about the availability of these symbols. Copy the updated symbol over your custom symbol tree. Make sure that you place it in the correct subfolder (for example, Sys, exe, dll, etc.). Single Processor vs. Multi Processor ------------------------------------ Windows NT uses a special kernel for SMP systems. During installation this kernel is renamed. It is important that you also rename the SYMBOL.DBG file for debugging. NTOSKRNL.EXE NTOSKRNL.DBG = Single processor NTKRNLMP.EXE. NTKRNLMP.DBG = Multiple processors 1. If you have a multi-processor system do the following. Under your custom symbol tree in \SYMBOLS\EXE there are two kernel files. Rename NTOSKRNL.DBG to NTOSKRNL.UNI. 2. Copy NTKRNLMP.DBG to NTOSKRNL.DBG. Custom HAL.DLL -------------- Some hardware platforms require a special Hardware Abstraction Layer Driver. Like the Kernel file, the custom HAL is renamed during the installation process. Here is a list of common HALs: HAL files for I386 Computers: Uncompressed Filename Size (bytes) Description ------------------------------------------------------------------------- HAL.DLL 48,416 Standard HAL for Intel systems HAL486C.DLL 47,376 HAL for 486 c step processor HALAPIC.DLL 63,616 Uniprocessor version of HALMPS.DLL HALAST.DLL 46,416 HAL for AST SMP systems HALCBUS.DLL 79,776 HAL for Cbus systems HALMCA.DLL 45,488 HAL for MCA-based systems (PS/2 and others) HALMPS.DLL 65,696 HAL for most Intel multiprocessor systems HALNCR.DLL 79,392 HAL for NCR SMP machines HALOLI.DLL 40,048 HAL for Olivetti SMP machines HALSP.DLL 52,320 HAL for Compaq Systempro HALWYSE7.DLL 40,848 HAL for Wyse7 systems HAL files for DEC Alpha Computers: Uncompressed Filename Size (bytes) Description -------------------------------------------------------------------------- HAL0JENS.DLL 56,800 Digital DECpc AXP 150 HAL HALALCOR.DLL 69,120 Digital AlphaStation 600 Family HALAVANT.DLL 66,752 Digital AlphaStation 200/400 Family HAL HALEB64P.DLL 70,528 Digital AlphaPC64 HAL HALGAMMP.DLL 72,896 Digital AlphaServer 2x00 5/xxx Family HAL HALMIKAS.DLL 67,040 Digital AlphaServer 1000 Family Uniprocessor HAL HALNONME.DLL 65,376 Digital AXPpci 33 HAL HALQS.DLL 65,088 Digital Multia MultiClient Desktop HAL HALSABMP.DLL 72,736 Digital AlphaServer 2x00 4/xxx Family HAL HAL files for MIPS Computers: Uncompressed Filename Size (bytes) Description -------------------------------------------------------------------------- HALACR.DLL 43,648 ACER HAL HALDTI.DLL 68,288 DESKStation Evolution HALDUOMP.DLL 41,728 Microsoft-designed dual MP HAL HALFXS.DLL 42,016 MTI with a r4000 or r4400 HALFXSPC.DLL 42,176 MTI with a r4600 HALNECMP.DLL 44,736 NEC dual MP HALNTP.DLL 116,000 NeTpower FASTseries HALR98MP.DLL 127,232 NEC 4 processor MP HALSNI4X.DLL 95,520 Siemens Nixdorf UP and MP HALTYNE.DLL 68,032 DESKstation Tyne HAL files for PPC Computers: Uncompressed Filename Size (bytes) Description -------------------------------------------------------------------------- HALCARO.DLL 169,504 HAL for IBM-6070 HALEAGLE.DLL 206,208 HAL for Motorola PowerStack and Big Bend HALFIRE.DLL 136,576 Hal for Powerized_ES, Powerized_MX, and Powerized_MX MP HALPOLO.DLL 169,152 HAL for IBM-6030 HALPPC.DLL 169,184 HAL for IBM-6015 HALWOOD.DLL 95,616 HAL for IBM-6020 How to Determine Which HAL to Use: During installation a text log file is created. This file can inform you about the original name of the HAL. 1. Go to %systemroot%\REPAIR subdirectory. 2. Run ATTRIB -R -H -S SETUP.LOG to make the file visible. 3. Bring up the file in Microsoft Notepad and search for HAL. NOTE: This same technique can be useful to verify if a special kernel is also used. Go to Setup HAL Symbol: 1. Go to your custom symbol tree under \SYMBOLS\DLL. 2. Rename HAL.DBG to HAL.X86. 3. Copy the "Custom HLL.DBG" to HAL.DBG. Using Symbols in the Debugger ----------------------------- A Windows NT Debugger, such as I386KD.EXE, looks for symbols in the following locations: _NT_ALT_SYMBOL_PATH system environment variable _NT_SYMBOL_PATH system environment variable These locations are set via system environment variables. They are usually configured by a debug batch file using the SET command. The _NT_ALT_SYMBOL_PATH is optional. For example: set _NT_SYMBOL_PATH=K:\NT35-SP3\SYMBOLS set _NT_ALT_SYMBOL_PATH=c:\WINNT\SYMBOLS NOTE: The symbols directory is the directory directly above the extension subdirectories (that is, if the kernel symbol file, NTOSKRNL.DBG, is located at C:\DEBUG\511\I386\SYMBOLS\EXE\NTOSKRNL.DBG. The _NT_SYMBOL_PATH should be set to C:\DEBUG\511\I386\SYMBOLS How to Use Paths: A good use of these various paths is for keeping static symbol trees for each Windows NT version. You simply point your symbol paths to each version and Service Pack as needed. For example, for a 1057 system with SP2 installed you could use the following: set _NT_ALT_SYMBOL_PATH=c:\NT351-SP2\SYMBOLS set _NT_SYMBOL_PATH=K:\NT351-1057\SYMBOLS The debugger attempts to use the Service Pack symbols first. [The Service Pack symbols do not include the base build symbols in this case, only the SP symbols.] If the debugger does not find a particular symbol in the SP tree it looks it up in the 1057 symbol tree. Search Order: The various symbol paths are searched in the order listed above. The first symbol file with the correct name that is encountered is used. In the example above, _NT_ALT_SYMBOL_PATH=c:\NT351-SP2\SYMBOLS is the first one searched. Environment Variable Override: I386KD supports a command line switch "-y" where you can specify a symbol path. However, using this switch overrides your existing environment variables. Change Path on the Fly: You can change the symbol search path at any time in the debugger by issuing "!Sympath" command. For example: !SYMPATH C:\SYMBOLS. Verifying the Symbols --------------------- !RELOAD: Once you have gotten to the "kd>" prompt for the first time, you must type "!RELOAD". This causes the symbolic information to be reloaded and synchronized. If you get the error "PsLoadedModuleList is NULL!", you probably have the wrong symbols loaded. Be sure you have the correct HAL.DBG and NTOSKRNL.DBG file installed for the computer that you are debugging. !PROCESS: Symbols can also be verified by typing "!PROCESS" if you get the error, "Can't find process list head", you probably have the wrong symbols loaded. KB: If the Stack Trace has gaps in the function name list, this indicates that you are missing symbols. Missing functions could also indicate a corrupt stack but this is somewhat rare. Double check your symbols before declaring a corrupt stack. Also, look at the return addresses on the stack. They should all be greater than 8000000. !SYMPATH: Incorrect symbols can be corrected by going to another command window, copying the correct symbols and doing a !reload on the debugger or by specifying the correct path with !SYMPATH . Advanced Symbol Verification ---------------------------- Sometimes customers do not know what driver versions they have installed on their computers. Perhaps they installed a hotfix for NTFS but they do not know which bug number. You may need to manually determine which .DBG files are needed. The best way to absolutely verify if target and dbg's match is to view their check sum value. This value is stored inside the file header. Note: To learn more about operating system file format search MSDN for "Portable Execution File Format." The PE header contains version numbers, link date\time, etc. The general plan here is to first find out the check sum of the customers files and then find a dbg file that has a matching check sum. There are many ways to extract the chksum from the target and the dbg. If you have access to the files, you can use the following. This example assumes you are interested in the file NTOSKRNL. LINK32: This utility can be found in the NT Build subdirectory \MSTOOLS: LINK32.EXE -DUMP -HEADERS NTOSKRNL.EXE LINK32.EXE -DUMP -HEADERS NTOSKRNL.DBG DUMPBIN: This utility can be found in the Visual C bin directory: DUMPBIN.EXE /HEADERS NTOSKRNL.EXE DUMPBIN.EXE /HEADERS NTOSKRNL.DBG If you are using a debugger on a system or a crash dump, you can find the checksum of the target file by viewing the file header in memory. 1. !DRIVERS - Will give you driver base address. 2. dd baseaddr+d8 L1 Checked Versions ---------------- If you install debug checked versions of Windows NT files you need to make special arrangements for they dbg symbol files. Some hotfix checked builds have the symbolic information built into the target file. In these cases, just make a copy of the file and name it *.DBG. Place the file in the normal symbol sub directory, that is, \SYMBOLS\EXE. All publicly released check builds have separate dbg files just like the free releases. However, the dbg for checked and free versions are different. For example, the MS NT DDK contains a complete checked build of NT. It also contains a complete symbol set to go with it. NOTE: Checked versions of the NT kernel are the same for both Multiprocessor and Uniprocessor systems. Symbol Locations ---------------- Retail Product: CD-ROM \SUPPORT\DEBUG\I386\SYMBOLS \\NTX86X\FREEBINS.XXX Additional query words: prodnt debugref ====================================================================== Keywords : kbusage Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTW310 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS310 kbWinNTAdvSerSearch kbWinNTS351search kbWinNTS350search kbWinNTS310search kbWinNT310Search kbWinNTW310Search Version : :3.1,3.5,3.51,4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.