DOCUMENT:Q130928 08-AUG-2001 [winnt] TITLE :Restoring a Backup of Windows NT to Another Computer PRODUCT :Microsoft Windows NT PROD/VER:3.1 3.5 3.51 4.0 OPER/SYS: KEYWORDS:kbusage ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 3.1 - Microsoft Windows NT Workstation version 3.1 - Microsoft Windows NT Advanced Server, version 3.1 - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 ------------------------------------------------------------------------------- SUMMARY ======= This article outlines how you can restore, from tape, one computer profile onto another computer. This procedure is intended for Intel-based (X86) computers. The procedure can be used to transfer your basic operating system (OS) configuration from an Intel 486 computer to an Intel Pentium computer. This procedure assumes that the tape drives on the original and new computer have a compatible tape format. NOTE: Windows NT backup is intended to be used as a disaster recovery utility to maintain your system by backing it up and restoring it to the SAME computer. When you restore to a different computer you may encounter problems, due to hardware differences between the two computers. This is an unsupported use of Windows NT backup. Microsoft makes no warranty, implied or otherwise, that it will restore your system correctly. MORE INFORMATION ================ If the HDD controller (either IDE or SCSI) on the new computer is the same type of controller used on the previous computer: 1. From the original computer, perform a backup of the complete OS and all other files that you wish to transfer. NOTE: If you are using Windows NT Backup, be sure you backup the registry (this requires administrator privileges). 2. Load Windows NT onto the new computer. Partition and drive information should be set up the same as the original computer. The partition sizes on the new computer should be at least as big as the partitions on the original computer. 3. Load the backup software for the tape drive that is attached to the new computer. 4. From tape, restore the complete OS and all necessary files into directories of the same name as the original computer. Be sure to restore the Registry. 5. Reboot the computer. The original computers profile is now restored onto the new computer. If the original computer has a SCSI controller and you want to restore Windows NT onto a computer with a different SCSI controller: 1. Before you make your complete back up of the original computer, load the driver for the SCSI controller that is in the new computer. 2. Reboot the computer. 3. An error appears stating "One or more services failed to load." Continue. 4. Perform a back up of the complete OS and all other files that you wish to transfer. 5. Load Windows NT onto the new computer. Partition and drive information should be set up the same as the original computer. The partition sizes on the new computer should be at least as big as the partitions on the original computer. 6. Load the backup software for the tape drive that is attached to the new computer. 7. From tape, restore the complete OS and all necessary files into directories of the same name as the original computer. Be sure to restore the Registry. 8. Reboot the computer 9. An error appears stating "One or more services failed to load." Continue. 10. Remove or rename the SCSI controller driver that was in the original computer. All drivers are located in the %SYSTEMROOT%\SYSTEM32\DRIVERS directory. Removing the old driver will keep the computer from showing the "One or more services failed to load" message at boot. You can also remove reference to the old driver from the Registry. 11. Reboot the computer The original computers profile is now restored onto the new computer. NOTE: Both example one and two are intended as a guide that will allow transfer of the Windows NT OS from one similar computer to another. However, there may be instances that this procedure will not work. If the new computer has additional hardware that was not present in the original computer, it may be necessary to install drivers before the additional hardware will function properly. Additional query words: prodnt ====================================================================== Keywords : kbusage Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTW310 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS351search kbWinNTS350search kbWinNTS310search kbWinNT310Search kbWinNTW310Search Version : 3.1 3.5 3.51 4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.