DOCUMENT:Q129053 08-AUG-2001 [winnt] TITLE :Enabling TCP/IP WinSock Support for RemoteBoot Workstations PRODUCT :Microsoft Windows NT PROD/VER: OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 3.5 ------------------------------------------------------------------------------- SUMMARY ======= In order to run non-Microsoft 16-bit Windows Sockets (WinSock) applications on RemoteBoot MS-DOS workstations, you must enable WinSock support. This article lists a method of enabling WinSock support for RemoteBoot operation using the 16-bit real mode TCP/IP stack. MORE INFORMATION ================ For WinSock support in RemoteBoot operation, do the following: 1. Ensure that the following lines are present in the AUTOEXEC.BAT file located in the %SystemRoot%\RPL\RPLFILES\ directory: UMB.COM LOAD TCPIP NMTSR.EXE SOCKETS.EXE 2. Ensure the following is included in the PATH statement: C:\LANMAN.DOS\DRIVERS\PROTOCOL\TCPIP 3. Ensure that following lines are present in the DOSBB.CNF file located in the %SystemRoot%\RPL\BBLOCK\NETBEUI\ directory: EXE BBLOCK\RPLBIND1.EXE ... TCPDRV.DOS NOTE: If any changes are made to the network card configuration details, make the appropriate changes to the PROTOCOL.INI file in the %SystemRoot%\RPL\BBLOCK\NETBEUI\ directory. 4. Add the following line to the [tcpglobal] section of the TCPUTILS.INI file located in the %SystemRoot%\RPL\RPLFILES\MACHINES\ \\WKSTA directory: [tcpglobal] hostname = 5. Add the following section to the TCPUTILS.INI file located at the %SystemRoot%\RPL\RPLFILES\MACHINES\\\WKSTA directory: [DNR] drivername=DNR$ bindings=TCPIP_XIF domain= nameserver0=
NOTE: Changes made to the TCPUTILS.INI file affects only the individual user profile. If the nameserver begins with a numeric digit, add quotes to the entry. 6. Add the following line to the [machinewritable files] section of the DOS622.FIT file located in the %SYSTEMROOT%\RPL\RPLFILES\RPLFIT directory: C:\LANMAN.DOS\TCPUTILS.INI\ MACHINES\(cname)\(profile) \WKSTA\TCPUTILS.INI NOTE: This line indicates that the TCPUTILS.INI file to be used is located at the individual user's profile directory instead of the global file. Additional query words: prodnt rpl ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNT350search kbWinNTSsearch kbWinNTS350 kbWinNTS350search ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.