DOCUMENT:Q128168  13-JUN-2001  [sna]
TITLE   :Configuring Windows 3.x Clients to use TCP/IP with SNA Server
PRODUCT :Microsoft SNA Server
PROD/VER:WINDOWS:2.1,2.11,2.11 SP1,3.0,4.0
OPER/SYS:
KEYWORDS:kbinterop kbnetwork kbsetup kbusage kbsna211sp1 sna4

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, versions 2.1, 2.11, 2.11 SP1, 3.0, 4.0 
-------------------------------------------------------------------------------

SUMMARY
=======

To configure Windows 3.x clients to use TCP/IP when communicating with SNA
Servers running Microsoft TCP/IP, either run setup and choose TCP/IP or manually
change the WIN.INI file.

MORE INFORMATION
================

To manually change the WIN.INI file so Windows 3.x clients use TCP/IP when
communicating with SNA Servers running Microsoft TCP/IP:

1. Set LocalFlag= ( REMOTE | LOCAL ).

   Use remote if the domain or workgroup name of the SNA Server is different from
   the one used in the WORKGROUP= entry or if there are routers between the
   client and the SNA Server. Use Local if the WORKGROUP= name is the same as
   the SNA Server. This LocalFlag entry is only used by setup to determine which
   option was selected.

2. Set Remote = ( domainname | \\servername | \\ipaddress ), where:

   domainname = The Windows NT domain name where SNA Server resides
   \\servername = The Windows NT computername of an SNA Server in the
   domain
   \\ipaddress = The Windows NT IP address of SNA Server (for example,
   \\11.22.33.44)

3. Change NosType= ( TCPIP | NOVELL | LANMAN ) to NosType=TCPIP.

4. Change NosSetup= ( TCPIP | NOVELL | WFW ) to NosSetup=TCPIP.

5. Add LogonUserName= and LogonDomainName=. These entries are used to specify
   the default username and logon domain for the workstation. These options are
   also used by the NetWare and Vines interfaces.

After you configure Windows 3.x clients to use TCP/IP when communicating with SNA
Servers running Microsoft TCP/IP, you can use two additional command line
switches (/user: and /pwd:) with WNAP.EXE.

NOTE: If you don't want to have to provide user and password information when you
use the above command, add the preftrans= entry to the [network] section of
Windows for Workgroups client's SYSTEM.INI file.

Please refer to Article Q130854 (Automating the SNA Server Win3x Client Login
Process) for details on how to automate the client login process when TCP/IP,
IPX/SPX, or Banyan Vines is used.

Additional query words: prodsna domain computer server name local flag nos setup type logon user log on

======================================================================
Keywords          : kbinterop kbnetwork kbsetup kbusage kbsna211sp1 sna4 
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211 kbSNAServ400 kbSNAServ210 kbSNAServ211SP1
Version           : WINDOWS:2.1,2.11,2.11 SP1,3.0,4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.