DOCUMENT:Q126393  12-JUN-2001  [sna]
TITLE   :INFO: SNA Server Configurations that Produce XID Rejections
PRODUCT :Microsoft SNA Server
PROD/VER::2.0,2.1,2.11,2.11 SP1,3.0,3.0 SP1,3.0 SP2,3.0 SP3,3.0 SP4,4.0,4.0 SP1,4.0 SP2,4.0 SP3,
OPER/SYS:
KEYWORDS:kbnetwork kbsna211sp1 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna400sp1

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 3.0 SP4, 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3, 4.0 SP4 
 - Microsoft Host Integration Server 2000 
-------------------------------------------------------------------------------

SUMMARY
=======

The following SNA Server XID rejection events are logged in the application
event log when you connect to an AS/400:

 - Event ID: 56 Event description: Connection <connection_name> failed:
   XID rejected by remote computer

 - Event ID: 230 Event Description: Connection <connection_name> Not
   responding to XID commands.

The connection goes into a Pending state and users get APPC primary return code:
0003; secondary return code: 00000005, when attempting to open a 5250 session.

Causes of Event ID 56:

 - There is already a controller defined on the AS/400 with the same name as the
   one defined in SNA Server, but it has a different "LAN remote adapter address
   (ADPTADR)" associated with it.

 - There is already a different controller name defined on the AS/400 with the
   same "LAN remote adapter address (ADPTADR)" (Autocreate Controller
   [AUTOCRTCTL] is set to YES in the AS/400 Line Description).

 - The "LAN remote adapter address (ADPTADR)" defined on the AS/400 represents
   the network interface card address of the SNA Server computer. To determine
   this, type the following at a Windows NT Command Prompt: " c:> net config
   server" (without the quotation marks)

 - The Remote Control Point Name in the SNA Server Administrator Connection
   Properties dialog box does not match the Local Control Point Name in the
   AS/400 Network Attributes screen.

Causes of Event ID 230:

 - Autocreate controller (AUTOCRTCTL), which is configured in the AS/400 Line
   Description, is set to No and you are using the incorrect Local Node ID value
   for the controller you have manually created on the AS/400.

 - The Remote SAP Address in the SNA Server connection properties is different
   than the SSAP address in the AS/400 line description.

   NOTE: The SAP address defined in the SNA Server link service setup does not
   have to match anything on the AS/400.

 - The administrator configured the Remote Network Address using an address that
   already exists on the LAN (and is bound to the DLC protocol) but it is not
   the address that the AS/400 administrator is attempting to connect to. For
   example, an administrator used the SNA Server machine address or other
   Windows NT machine that has the MS-DLC protocol installed.

Additional query words: prodsna nic adapter admin snafaq

======================================================================
Keywords          : kbnetwork kbsna211sp1 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna400sp1 
Technology        : kbAudDeveloper kbSNAServSearch kbHostIntegServ2000 kbSNAServ300 kbSNAServ200 kbSNAServ211 kbSNAServ400 kbSNAServ210 kbSNAServ211SP1 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ400SP2 kbSNAServ400SP3 kbSNAServ400SP4 kbSNAServ300SP2 kbSNAServ300SP4
Version           : :2.0,2.1,2.11,2.11 SP1,3.0,3.0 SP1,3.0 SP2,3.0 SP3,3.0 SP4,4.0,4.0 SP1,4.0 SP2,4.0 SP3,4.0 SP4
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.