DOCUMENT:Q103624  08-AUG-2001  [winnt]
TITLE   :Err Msg: Winlogon.exe-Drive Not Ready
PRODUCT :Microsoft Windows NT
PROD/VER:3.1 3.5
OPER/SYS:
KEYWORDS:kbsetup

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.1 
 - Microsoft Windows NT Workstation version 3.1 
 - Microsoft Windows NT Advanced Server, version 3.1 
 - Microsoft Windows NT Workstation version 3.5 
 - Microsoft Windows NT Server version 3.5 
-------------------------------------------------------------------------------

SYMPTOMS
========

In Microsoft Windows NT, when the static Drive Letter in Disk Administrator is
changed on the logical drive that Windows NT is presently installed on, you will
receive one of the following error messages, or a combination of the messages:

   Winlogon.exe-Drive not ready
   The drive is not ready for use; its door may be open. Please check drive [C:]
   and make sure that a disk is inserted and that the drive door is closed.

   -or-

   Winlogin.exe-No Disk
   There is no disk in the drive. Please insert a disk into drive [C:]

   -or-

   System Error
   Cannot read from drive [C:]

WORKAROUND
==========

Change the drive letter in Disk Administrator back to it's original logical
drive letter assignment.

MORE INFORMATION
================

Assignment of drive letters affects only the way the device drivers assign drive
letters to disks attached to the system. It does not remap any existing
references to drive letters. Additionally, there may be active system processes
that cannot be stopped in order to change the drive letter references.

Static drive letter assignment is useful in the following cases:

 - To snapshot the existing drive letter assignments, so that new disks can be
   added to the system without changing the drive letter assignments of the
   existing disks.

 - To assign a particular drive letter to an existing volume. The former case
   allows the user to add new disks without having to change environment
   variables, page file location, .INI files, or application initialization data
   stored in the registry. However, in the second case, the user (who must be an
   administrator) is responsible for updating all references to the drive.

For more information, query on the following words in the Microsoft Knowledge
Base:

   virtual and drive

Additional query words: prodnt sticky

======================================================================
Keywords          : kbsetup 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW310 kbWinNTSsearch kbWinNTS350 kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS350search kbWinNTS310search kbWinNT310Search kbWinNTW310Search
Version           : 3.1 3.5

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.