DOCUMENT:Q102728 08-AUG-2001 [winnt] TITLE :Manual Installation of the UAM PRODUCT :Microsoft Windows NT PROD/VER:3.1 4.0 OPER/SYS: KEYWORDS:kbinterop ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Advanced Server, version 3.1 - Microsoft Windows NT Server versions 3.51, 4.0 ------------------------------------------------------------------------------- Customers that have installed the Services for Macintosh and have not yet upgraded their partitions to NTFS will not have the Microsoft User Authentication Module (UAM) volume. This article explains how to set up that volume after a NTFS partition has been created. The Microsoft UAM volume is formed with the following files: - MS UAM - ReadMe.UAM To create this volume and put the correct files in it, do the following: 1. Make sure that you have an NTFS partition. 2. If you are running Windows NT 3.x, run the following command from a command prompt: SETUP /i OEMNXPSM.INF /c UAMINSTALL If you are running Windows NT 4.0, run the following command from a command prompt: SETUP /i OEMNSVSM.INF /c UAMINSTALL The OEMNXPSM.INF and OEMNSVSM.INF files are the script information files for the Services for Macintosh, and UAMINSTALL is the name of the section that has the necessary commands to modify the registry in order to add that volume. 3. The Windows NT Setup screen appears and returns to the command prompt if the above step was successful. There are two things happening at this point. One is the creation of the volume itself, and the other is the copying and creation of the files. The SMFUAM.IFO and the SMFUAM.RSC are the two forks for the MS UAM file, and the SFMUAM.TXT is the ReadMe.UAM file. These files get stored within a subdirectory called AppleShare Folder, which is also created by this script file. 4. Because the script file modifies the registry, you will not see the volume if you have the File Services for Macintosh started. If this is the case, stop and start the File Services for Macintosh. 5. Check the newly created volume in File Manager, Server Manager or the MacFile icon in the Control Panel. Additional query words: sfm prodnt Authentication ====================================================================== Keywords : kbinterop Technology : kbWinNTsearch kbWinNT351search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS351search kbWinNT310Search Version : 3.1 4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.