DOCUMENT:Q101813  08-AUG-2001  [winnt]
TITLE   :Why AutoCAD 386 Doesn't Work with Windows NT
PRODUCT :Microsoft Windows NT
PROD/VER:3.1 3.5 3.51 4.0
OPER/SYS:
KEYWORDS:kb3rdparty

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.1 
 - Microsoft Windows NT Workstation version 3.1 
 - Microsoft Windows NT Advanced Server, version 3.1 
 - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 
 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 
-------------------------------------------------------------------------------


SUMMARY
=======

AutoCAD 386 release 11 and 12 do not run with Windows NT because AutoCAD 386
requires DPMI version 1.0 and Windows NT supports version 0.9. When you try to
run AutoCAD 386 in a virtual machine, you receive the following Pharlap error
message:

   The 386 chip is currently executing in virtual 8086 mode under the control of
   another program. You must turn off this other program in order to use 386
   DOS-Extender to run in protected mode.

MORE INFORMATION
================

The AutoCAD memory model requires the ability to map a block of a virtual
machine's conventional memory (below 640K) into one or more of its protected
mode segments.

NOTE: The same conventional memory block is mapped by AutoCAD into multiple
protected mode segments; therefore, any extensions must not assume a 1-to-1
mapping between a particular conventional memory block and a particular
segment.

For AutoCAD to run from the Windows NT MS-DOS command prompt:

 - Microsoft would have to implement DPMI 1.0 call 0509 (Map Conventional
   Memory) in the NT DPMI server. 386|DOS-Extender detects this functionality by
   making DPMI call 0401 (Get DPMI Capabilities) and checking if bit 3 is set in
   AX. This is how AutoCAD runs under OS/2 2.0.

   -or-

 - An NT driver would need to be written with the same functionality that the
   PHARLAP.386 device driver provides when it is loaded under Windows 3.1. This
   functionality allows 386|DOS-Extender to remap arbitrary linear regions be
   reading and writing PTEs for pages that are locked in memory. It also
   requires that DPMI calls 0600 and 0601 actually lock pages into memory so
   they don't move after they are remapped. 386|DOS-Extender detects this
   capability by making DPMI call 0A00 with DS:ESI pointing to the string
   "PHARLAP.LINEAR_REMAP." If the capability is present, it returns an entry
   point that 386|DOS-Extender can call to remap linear regions.

AutoCAD 386 is manufactured by Autodesk, Inc., a vendor independent of Microsoft;
we make no warranty, implied or otherwise, regarding this product's performance
or reliability.


Additional query words: prodnt ACAD vdm session

======================================================================
Keywords          : kb3rdparty 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTW310 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS351search kbWinNTS350search kbWinNTS310search kbWinNT310Search kbWinNTW310Search
Version           : 3.1 3.5 3.51 4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.