DOCUMENT:Q99149  11-DEC-2000  [crossnet]
TITLE   :Updating LAN Manager Redirector After Upgrading from MS-DOS 3
PRODUCT :Windows for Workgroups and Windows NT Networking Issues
PROD/VER::2.2c,3.0,6.0,6.2,6.21,6.22
OPER/SYS:
KEYWORDS:msdos

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system versions 6.0, 6.2, 6.21, 6.22 
 - Microsoft Network Client for MS-DOS version 3.0 
 - Microsoft LAN Manager, version 2.2c 
-------------------------------------------------------------------------------

SUMMARY
=======

If you upgrade to MS-DOS 6.0 or later from MS-DOS version 3.x and you are using
Microsoft LAN Manager version 2.1 or 2.2, you must copy the correct redirector
to your LAN Manager directory. If you use the incorrect redirector, you receive
an error message stating that you are using an incorrect version of MS-DOS. To
correct this error, use the procedure below appropriate to your version of LAN
Manager.

MORE INFORMATION
================

LAN Manager 2.1 or 2.2 Enhanced
-------------------------------

To correct this situation, copy and rename the NETWKSTA.500 redirector. For
example, if you are using the default LANMAN.DOS directory, type the following
on one line at the MS-DOS command prompt and then press ENTER:

   copy c:\lanman.dos\netwksta\netwksta.500 c:\lanman.dos\netprog
   \netwksta.exe

This copies (and renames) the MS-DOS 5 NETWKSTA redirector (which works correctly
for MS-DOS 6) over the NETWKSTA redirector you are currently using.

You should not need SETVER for the network; if you have NETWKSTA in the SETVER
table, you may want to remove it.

LAN Manager 2.1 or 2.2 Basic
----------------------------

The above information is true for LAN Manager 2.1 and 2.2 Basic except that you
need to copy REDIR.500 instead of NETWKSTA.500. For example, if you are using
the default LANMAN.DOS directory, type the following at the MS-DOS command
prompt and then press ENTER:

   copy c:\lanman.dos\redir\redir.500 c:\lanman.dos\basic\redir.exe

LAN Manager Version 2.0
-----------------------

If you are using LAN Manager version 2.0 and are upgrading from MS-DOS version
3.x, you need to obtain the MS-DOS Supplemental disks. For more information,
refer to the coupon in the back of your "User's Guide."

Additional query words: 6.22 6.00 6.20 lanman "Error 2"

======================================================================
Keywords          : msdos 
Technology        : kbAudDeveloper kbZNotKeyword kbLanManSearch kbNetworkClientSearch kbLanMan220c kbNetworkClient300DOS kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600
Version           : :2.2c,3.0,6.0,6.2,6.21,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.