DOCUMENT:Q323316 06-AUG-2002 [iis] TITLE :HOW TO: Create an IIS Baseline by Using the Active Server Pages PRODUCT :Internet Information Server PROD/VER::4.0,5.0 OPER/SYS: KEYWORDS:kbHOWTOmaster ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Internet Information Server version 4.0 - Microsoft Internet Information Services version 5.0 ------------------------------------------------------------------------------- IN THIS TASK ------------ - SUMMARY - IIS 4.0 - Set Up the Performance Monitor Logs - Schedule the Log to Run at Certain Times - IIS 5.0 - Set Up the Performance Monitor Logs and Schedule the Logs to Run at Certain Times - REFERENCES SUMMARY ======= This article provides step-by-step instructions for creating performance logs that can help you to analyze the performance of your Internet Information Server (IIS) 4.0 and Internet Information Services (IIS) 5.0 computer. These logs may be used for troubleshooting or for obtaining a performance baseline for future notification of possible issues with your IIS server. NOTE: Performance is best analyzed over several set time intervals. The longer the logging period, the better analysis is as to the typical baseline as opposed to the heavy baseline that your IIS server experiences. IIS 4.0 ------- Set up the Performance Monitor Logs: You must create two sets of logs: one for high traffic, and one for low traffic. 1. Create two folders, one to host your high traffic Performance Monitor logs (for example, C:\Perfmon\High) and one for the low traffic logs (for example, C:\Perfmon\Low). 2. Open Administrative Tools. To do this, click Start, point to Programs, click Administrative Tools, and then click Performance Monitor. 3. In Performance Monitor, click View, and then click Log. 4. Add the correct counter. On the Edit menu, click Add to Log, click to select Active Server Pages, and then click Add. 5. Click Done. 6. To save the log file, click Options, click Log, and then name the file Perfmon.log. Note that you must remember the path to the file so that you can schedule the log to run at certain times. For example, the path may be C:\Perfmon\High\Perfmon.log. 7. On the File menu, click Save Log Settings, and then name the file Perfmon.pml. Note that you must remember the path to the file so that you can schedule the log to run at certain times. For example, the path may be C:\Perfmon\High\Perfmon.pml. 8. Follow these steps again to set up another log and log settings. Schedule the Log to Run at Certain Times: The following steps are provided as-is and are to be used only to provide scheduling functionality that currently does not exist on the Microsoft Windows NT 4.0 operating system. Instead of following these steps, you can use any third-party product that is designed to schedule performance monitoring. The following file is available for download from the Microsoft Download Center: DownloadDownload Schedperf.exe now (http://download.microsoft.com/download/iis50/Utility/1.0/NT4/EN-US/schedperf.exe) Release Date: July 3, 2002 For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base: Q119591 How to Obtain Microsoft Support Files from Online Services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on secure servers that prevent any unauthorized changes to the file. NOTE: To use the following Microsoft Visual Basic script, you must update your Windows Management Instrumentation (WMI) provider for Windows NT 4.0. 1. Download Schedperf.exe. 2. Unzip Schedperf.zip in its own folder (for example, C:\Perfmon). 3. Double-click Wmicore.exe to install it. 4. After the installation is complete, open a command prompt, switch to the folder that contains the extracted files, and then start the script by using the following command: WSCRIPT SCHEDPERF.VBS 5. Read the warning, and then click OK. 6. Type the path to the folder where you extracted Schedperf.vbs (for example, C:\Perfmon). Make sure that you do not type a backslash (\) at the end of the path. 7. Type the time zone information. To do this, calculate the offset from the GMT time zone in minutes (for example, 420 for Pacific Standard Time during Daylight Savings Time). 8. Type the path to your high-traffic Performance Monitor logs. 9. Type the start and end time for your high-traffic Performance Monitor logs in hh:mmAM/PM format. 10. Type the path to your low-traffic Performance Monitor logs. 11. Type the start and end time for your low-traffic Performance Monitor logs in hh:mmAM/PM format. 12. Type "AT" (without the quotation marks) at a command prompt to review the schedule entries. The JobID that is listed in the left side can be used to delete an entry. Note that these Performance Monitor logs recur daily from Monday to Sunday. You may delete them by typing "AT /delete" (without the quotation marks) at a command prompt. The AT functionality is only one of many Windows NT 4.0 scheduling applications. You can use any scheduling program for this task. IMPORTANT: The key to obtaining data at the correct points is to have an understanding of when your IIS server is receiving the most requests and the least requests. For more information about how to obtain this information, see the "References" section. IIS 5.0 ------- Set Up the Performance Monitor Logs and Schedule the Logs to Run at Certain Times: 1. Open Administrative Tools. To do this, click Start, open Control Panel, and then double-click Administrative Tools. 2. Click Performance. 3. In the left pane, double-click Performance Logs and Alerts. 4. Click to select Counter Logs. 5. Right-click inside the right pane, and then click New Log Settings. 6. In the New Log Settings dialog box, type a name for the log, such as "ActiveServerPagesHigh". 7. On the General tab of the ActiveServerPagesHigh log, click Add Objects in the Counters section. 8. In the Performance Objects list, click Active Server Pages, and then click Add. 9. At the log screen, click the Schedule tab to schedule the log times to run. 10. Calculate the correct time frame, and then set the start time to one hour before this time. For example, if the peak time is from 11:00 A.M. to 1:00 P.M. PST every Friday, start the log at 10:00 A.M. PST and set it to end at 2:00 P.M. PST every Friday. If the lowest usage time is from 2:00 A.M. to 4:00 A.M. PST every Friday, schedule a new log (such as ActiveServerPagesLow) to run from 1:00 A.M. to 5:00 A.M. PST every Friday. 11. Repeat these steps for the other log. REFERENCES ========== If you have already gathered your data by following the steps in this article and you want to analyze your data for performance or baseline purposes, view the following article in the Microsoft Knowledge Base: Q323312 HOW TO: Create an IIS Baseline by Using Log Analysis For additional information about similar procedures, click the article numbers below to view the articles in the Microsoft Knowledge Base: Q323314 HOW TO: Create an IIS Baseline by Using the Memory Object Q323315 HOW TO: Create an IIS Baseline by Using the Processor Object Q323317 HOW TO: Create an IIS Baseline by Using the Web Service Object Q323701 HOW TO: Create an IIS Baseline by Using the Process Object Additional query words: ====================================================================== Keywords : kbHOWTOmaster Technology : kbiisSearch kbiis500 kbiis400 Version : :4.0,5.0 Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.