DOCUMENT:Q306863  11-JUN-2002  [sna]
TITLE   :SnaBase Fails to Start Automatically on HIS 2000 Admin Client
PRODUCT :Microsoft SNA Server
PROD/VER::
OPER/SYS:
KEYWORDS:kbDSupport kbhis2000 kbhis2000bug

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Host Integration Server 2000 
-------------------------------------------------------------------------------

IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:

   Q256986 Description of the Microsoft Windows Registry

SYMPTOMS
========

The SnaBase service may fail to start when you are using the Host Integration
Server (HIS) 2000 Admin Client even though the service is configured for
automatic startup . In addition, an event ID 590 may be logged in the
application event log.

The SnaBase service does start successfully if it is manually started after the
system finishes its initialization.

CAUSE
=====

The Setup program for the Host Integration Server 2000 Admin Client does not
create the following registry entries for the SnaBase service:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SnaBase\DependOnService
   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SnaBase\DependOnGroup

WORKAROUND
==========

WARNING: If you use Registry Editor incorrectly, you may cause serious problems
that may require you to reinstall your operating system. Microsoft cannot
guarantee that you can solve problems that result from using Registry Editor
incorrectly. Use Registry Editor at your own risk.

You can manually add a registry entry to correct the problem, as shown in the
following steps.

1. Start Registry Editor (Regedt32.exe).

2. Locate and click the following key in the registry:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SnaBase

3. From the Edit menu, click Add Value, and then add the following registry
   value:

   Value name: DependOnService
   Data type: REG_MULTI_SZ

   Add the following entries to the Multi-String Editor dialog box:

   LanmanWorkstation
   NtLmSsp

   NOTE: Each entry must be on a separate line. Press "ENTER" after the first
   entry to move down to the next line. Press "ENTER" after the second entry to
   move down to a blank line, and then click OK to close the dialog box.

4. Quit Registry Editor.

The DependOnGroup entry does not have to be added because it does not contain any
values by default. If the DependOnGroup value is added manually, you must define
it as a REG_MULTI_SZ data type and do not add any values to the Multi-String
Editor dialog box.

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft Host Integration
Server 2000.


MORE INFORMATION
================

The SnaBase service cannot start until all dependency services have completed
initialization. The SnaBase service is designed to time out if the dependency
services do not start after 10 seconds. The Host Integration Server 2000 Admin
Client's SnaBase service is dependent upon the following two services:

   Workstation and NT LM Security Support Provider

If any of these other services do not start in a timely fashion, the SnaBase
service will not be able to start, and an event ID 590 may be logged in the
application event log.

The following Microsoft Knowledge Base article describes a registry parameter
that can be configured to increase SnaBase's default service timeout if 10
seconds is not sufficient:

   Q192807 SNABase Service Fails to Start on SNA Server

The ServerStartupTimeout registry parameter applies to the Windows NT Client for
SNA Server and the Host Integration Server 2000 Admin Client in addition to SNA
Server and HIS 2000 Server. This parameter was added to SNA Server 3.0 SP4 and
SNA Server 4.0 SP2 and is available in all later versions.

The Host Integration Server 2000 Admin Client can be configured to allow SnaBase
to operate as either a service or an application. If SnaBase is configured to
operate as an application, the problem described in this article is not likely
to occur.

Additional query words:

======================================================================
Keywords          : kbDSupport kbhis2000 kbhis2000bug 
Technology        : kbAudDeveloper kbHostIntegServ2000
Version           : :
Issue type        : kbbug
Solution Type     : kbnofix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.