DOCUMENT:Q306065 02-NOV-2001 [winnt] TITLE :Direct Cable Connection Between Win2000 and Win98 Not Working PRODUCT :Microsoft Windows NT PROD/VER::2000 OPER/SYS: KEYWORDS:kbenv kbsetup kbOSWin98 KBW2KHOME kbOSWin2000x kbOSWin98SE kbAudEndUser kbWin98 kbWin98 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows 2000 Professional - Microsoft Windows 2000 Server - Microsoft Windows 2000 Advanced Server - Microsoft Windows 98 ------------------------------------------------------------------------------- SYMPTOMS ======== You may not be able to establish a connection from a Windows 2000-based computer to a Windows 98-based computer, or vice versa, by using the Direct Cable Connection feature. RESOLUTION ========== To resolve this behavior, following these troubleshooting steps for the Direct Cable Connection feature: 1. Make sure that both the Client for Microsoft Networks protocol and the File and Print Sharing for Microsoft Networks protocol are installed on both computers: - For Windows 2000 a. Right-click My Network Places, and then click Properties. b. Double-click Make New Connection, and then specify "Connect directly to another computer" as the connection type. c. Make sure that the user name that is checked is name of the user who will establish the connection if the Windows 2000-based computer is to be used as host. By default, the two relevant protocols will be installed if they are not already installed. - For Windows 98 a. Right-click Network Neighborhood, and then click Properties. b. Make sure that Dial-Up Adapter is installed. c. Make sure that the two relevant protocols appear in the list of installed network components. 2. Verify that the cable that you are using is compatible with direct cable connections. 3. Reverse the roles of Host and Guest on the two computers. 4. Check for conflicts with the ports. In Device Manager, verify that the ports are not already in use. 5. If the parallel port direct cable connection becomes disconnected after a short time, apply Windows 2000 Service Pack 2 or later. MORE INFORMATION ================ For additional information about cables that are compatible with Direct Cable Connection, click the article number below to view the article in the Microsoft Knowledge Base: Q142324 Cables That Are Compatible With Direct Cable Connection For additional information about parallel direct cable connections' becoming disconnected, click the article number below to view the article in the Microsoft Knowledge Base: Q261276 Parallel Direct Cable Connection Drops Shortly After Connecting Additional query words: ====================================================================== Keywords : kbenv kbsetup kbOSWin98 KBW2KHOME kbOSWin2000x kbOSWin98SE kbAudEndUser kbWin98 kbWin98SE Technology : kbwin2000AdvServ kbwin2000AdvServSearch kbwin2000Serv kbwin2000ServSearch kbwin2000Search kbwin2000ProSearch kbwin2000Pro kbWin98search kbWinAdvServSearch kbWin98 Version : :2000 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.