DOCUMENT:Q276364 12-JUN-2001 [sna] TITLE :LU-LU Test Fails with Active AS/400 Connection PRODUCT :Microsoft SNA Server PROD/VER::4.0,4.0 SP1,4.0 SP2,4.0 SP3 OPER/SYS: KEYWORDS:kbDSupport sna4 kbsna400sp1 kbsna400sp2 kbsna400sp3 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3 ------------------------------------------------------------------------------- SYMPTOMS ======== When a Microsoft SNA Server operator has an active connection to an AS/400 and then attempts to verify LU 6.2 session availability for a given Advanced Program-to-Program Communications (APPC) triplet (for example local LU, remote LU, and mode name) by using the APPC Session Viewer utility, and the test fails, look for the following event in the Microsoft Windows NT Application Event log: event id 18 APPC session activation failure: BIND negative response or UNBIND request received Sense data = 80040000 (NOTE: 0032xxxx indicates UNBIND received) Connection = connection LU alias = lu alias PLU alias = plu alias Mode name = mode name CAUSE ===== SNA Server sent a BIND request to start an LU version 6.2 session with the remote system, but the remote system rejected the request for the reason indicated in the sense data error. This error is usually caused by a mismatch between the SNA Server configuration and the configuration of the remote system (for example, the Local APPC LU name, Remote APPC LU name or mode name specified in the SNA BIND request may not be configured on the host). RESOLUTION ========== Make certain that the "Remote APPC LU" name that is created on the SNA server matches the "Local Control Point Name" on the AS/400. For additional information and configuration examples that show how SNA Server can be configured to communicate with an AS/400, click the article numbers below to view the articles in the Microsoft Knowledge Base: Q112158 Configuring SNA Server to Talk to AS/400 Over 802.2 Q112159 Configuring SNA Server to Talk to AS/400 Over SDLC Additional query words: ====================================================================== Keywords : kbDSupport sna4 kbsna400sp1 kbsna400sp2 kbsna400sp3 Technology : kbAudDeveloper kbSNAServSearch kbSNAServ400 kbSNAServ400SP1 kbSNAServ400SP2 kbSNAServ400SP3 Version : :4.0,4.0 SP1,4.0 SP2,4.0 SP3 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.